ASLi (CHINA) TEST EQUIPMENT CO., LTD
| Payment Terms | T/T, Western Union |
| Supply Ability | 100 sets per month |
| Delivery Time | 25workdays |
| Packaging Details | standard export plywood case |
| Internal Dimension | W1150xH500xD500mm |
| External Dimension | W1400xH1600xD750mm |
| Volume | 290 Liters |
| Applicable Standard | GB/T16422,GB/T5170.9 |
| Application | Plastic |
| Humidity Range | more than 95%R.H. |
| Brand Name | ASLI |
| Model Number | UV-290 |
| Certification | CE , ISO, SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Accelerated Weathering UV Aging Test Chamber / UV Resistant Test Machine
Accelerated weathering UV aging test chamber environmental simulated chamber
Sun Light Simulation UV Weather Resistance Test Chamber Tesing Nonmetallic
UVA UVB Light Programmable UV Aging Test Chamber
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 100 sets per month |
| Delivery Time | 25workdays | Packaging Details | standard export plywood case |
| Internal Dimension | W1150xH500xD500mm | External Dimension | W1400xH1600xD750mm |
| Volume | 290 Liters | Applicable Standard | GB/T16422,GB/T5170.9 |
| Application | Plastic | Humidity Range | more than 95%R.H. |
| Brand Name | ASLI | Model Number | UV-290 |
| Certification | CE , ISO, SGS | Place of Origin | China |
| High Light | uv weathering test chamber ，uv weather test chamber | ||
high UV radiation and humidity UV Degradation chamber/Rack for aging laboratory
UV Aging Test Chambe for PV Module purpose
To precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation
UV Aging Test chamber for pv module apparatus
1.A temperature -controlled test chamber with a window or fixtures for a UV light source and the module under test. The chamber shall be capable of maintaining the module temperature at 60±5ºC
5.For light sources with a negligible spectral content in the visible range the module shall be short circuited. Alternatively the module can be connected to a load sized such that the module will operate near the maximum power point . the latter is recommended for light sources emitting a significant portion of light in the visible spectrum where the module exhibits a power equal to or large than20% of its STC measured power
UV aging test chamber procudrue
| Model | UV-290 | |
| Internal Dimension WxHxD (mm) | 1150x500x500 | |
| External Dimension WxHxD (mm) | 1400x1600x750 | |
| Applicable Standard | GB/T16422,GB/T5170.9 | |
| Temperature Range | R.T.+15°C~+70°C | |
| Temperature Fluctuation | ±0.5°C | |
| Humidity Range | ≥95%R.H. | |
| Environmental Temperature for Use | +5°C~+35°C | |
| Test Light Source | UVA,UVB UV light | |
| Wave Length of Test light Source (nm) | 280~400 | |
| Center Distance between Sample and Tube (mm) | 50±2 | |
| Center Distance Between Tubes (mm) | 75±2 | |
| Material of Internal Case | Stainless steel with sanding polish | |
| Material of External Case | Stainless steel with sanding polish or painting coated | |
| Heating and Humidifier | Electric-heat type steam generator ,heating and humidification | |
| Safety System | Operation Interface | Digital smarts touch key input (Programmable) |
| Running Mode | Program/constant running type | |
| Input | Black panel thermometer.PT-100 Sensor | |
| Standard Configuration | 1 pc Stainless steel shelves | |
| Safety Configuration | Protection of electric leakage, power outage when over-load, over-temperature protection, water short storage, ground lead protection | |
| Power | AC220V 1 phase 3 lines, 50HZ | |
| |
uv irradiation chambers can simulate the sun, rain and dew to damage the material,the machine using UV lamp simulate the effect of sunlight, cold rain and dew. Being tested materials are placed in a certain environment which the light and moisture are alternating. The materials are tested for several days or weeks, you can know the damage of material at outside for several months or several years, Damage types include: bleaching, discoloration, loss of light, powder, crack, turbidity, bubble-based, embrittlement, strength decline and oxidation.
Corresponding standard:
Accord with ASTMG53-77, GB,GJB,MIL,ASTM,CNS,IEC,JIS,AATCC,DIN,Fed Test,BS,SAE
Applicable industries:
accelerated weather tests is widely used in paint, resins, plastics, printing and packaging,aluminum, adhesives, auto, cosmetics, metals, electronics, electroplating, medicine, etc.
Acceleration Stability Chamber with UV and Photostability Requirement for Plastic
Company Details
Business Type:
Manufacturer
Year Established:
1988
Total Annual:
10000000-12000000
Employee Number:
100~120
Ecer Certification：
Active Member
ASLi (China) Test Equipment Co., Ltd is authenticated by competent testing centers, including the National Measurement andTestingCenterand South China Center of Metrology. Famous for precision and reliability, these products have been extensively used within the industry, by research institutions, q... ASLi (China) Test Equipment Co., Ltd is authenticated by competent testing centers, including the National Measurement andTestingCenterand South China Center of Metrology. Famous for precision and reliability, these products have been extensively used within the industry, by research institutions, q...
Get in touch with us
Leave a Message, we will call you back quickly!