Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Your message must
be between 20-3,000 characters!
Submit Requirement
Thank You！
Your requirement has been sent. we will contact you quickly!
{"title":"4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/8b\/dc\/04fa6410abd43a8888b01835f0a6-200x200-1\/4_20mm_pitch_wire_to_wire_connectors_terminals_male_crimp_terminals_tin_plated.jpg","attrs":{"Brand Name":"HRT","Model Number":"C4255M-T","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"Crimp Wire Connector Terminals Tin Plated Phosphor Bronze Connectors For AWG30#","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/87\/0d\/68895b027f442191e28a6be9a982-200x200-1\/crimp_wire_connector_terminals_tin_plated_phosphor_bronze_connectors_for_awg30_23_to_26_23.jpg","attrs":{"Brand Name":"HRT","Model Number":"A2001-TPE","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"ISO Wire To Wire Connector Terminals 2.50mm Pitch Connector Crimp Terminal","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/43\/0e\/0862fbad0003c3b88af091651eb3-200x200-1\/iso_wire_to_wire_connector_terminals_2_50mm_pitch_connector_crimp_terminal.jpg","attrs":{"Brand Name":"HRT","Model Number":"C2505F-T","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"2.0mm Pitch Wire To Wire Connector With Tinned Brass Male Terminals Female","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/c6\/54\/f5d1678531ac436480a0438d22cc-200x200-1\/2_0mm_pitch_wire_to_wire_connector_with_tinned_brass_male_terminals_female_contact.jpg","attrs":{"Brand Name":"HRT","Model Number":"C2003 series terminals","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
{"title":"Wire To Wire Connector Terminals Crimp Terminals With Tinned Phosphor Bronze","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/cd\/f0\/6f85c983060df58f5e8b30bc3db2-200x200-1\/wire_to_wire_connector_terminals_crimp_terminals_with_tinned_phosphor_bronze_contact.jpg","attrs":{"Brand Name":"HRT","Model Number":"C3030 series terminals","Certification":"ISO9001\/ ISO14001\/UL\/RoHS\/REACH","Place of Origin":"Dongguan, China(mainland)"}}
1, The specification of the product including basic size information, electrical and mechanical properties.
Basic size information
Termination Interface Style
crimp or compression
Processing methods
E-stamping before tin-plated
Insulation O.D.
3.10mm(Max)
Part No.
C4255M-TPE or C4255M-TPE-H or C4255M-TPE-TH
Application
signal
Electrical properties
Current Rating
9A AC, DC
Voltage Rating
600V AC, DC
Contact Resistance
10mΩ Max
Insulation Resistance
1000mΩ min
Withstanding Voltage
1500V AC/minute
Mechanical properties
Temperature range
-25℃ to 85 ℃
Other information please kindly check the following picture.
2, Related drawing and report
The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!
1. Scope
This specification covers the requirements for product performance of 4.20mm pitch wire to board
& wire to wire connectors series.
2. Construction,Dimensions,Material & Plating
See the attached drawings
3. Ratings & Applicable Wires
Item
Standard
Rated Voltage (Max.)
600V AC/DC
Insulation O.D. 3.10mm (Max.)
Rated Current (Max.) And Applicable Wires
AWG#14
6A AC/DC
AWG#16
AWG#18
AWG#20
5A AC/DC
AWG#22
4A AC/DC
AWG#24
3A AC/DC
Ambient Temperature Range
-25℃ ~ +85℃*
*: Including terminal temperature rise
4. Electrical Performance
Test Description
Procedure
Requirement
4-1
Contact Resistance
Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)
10mΩ (Max.)
4-2
Insulation Resistance
Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)
1000MΩ (Min.)
4-3
Dielectric Withstanding Voltage
Mate connectors, apply 1500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)
No Breakdown.
4-4
Contact Resistance on Crimped Portion
Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.), 10mA.
5mΩ (Max.)
5. Mechanical Performance
Test Description
Procedure
Requirement
5-1
Actuator Insertion & Withdrawal Force
Insert and withdraw connectors at the speed rate of 25±3mm / minute.
Refer to paragraph 7
5-2
Crimping Pull Out Force
Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)
AWG#14
11.0kgf (Min)
AWG#16
10.0kgf (Min)
AWG#18
9.0kgf (Min)
AWG#20
6.0kgf (Min)
AWG#22
4.0kgf (Min)
AWG#24
3.0kgf (Min)
5-3
Terminal Insertion Force.
Insert the crimped terminal into the housing.
1.50kgf (Max.)
5-4
Terminal/Housing Retention Force.
Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.
3.00kgf (Min.)
5-5
Pin Retention Force
Apply axial push force at the speed rate of 25±3mm / minute
3.00kgf (Min.)
5-6
Latch Yield Strength
Mate connectors and pull apart until both latches break at the speed rate of
25±3mm / minute
7.0kgf (Min.)
5-7
Panel Mount Retention Force
Insert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute.
16.0kgf (Min.)
5-8
Durability
When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.
Contact Resistance 20mΩ (Max.)
5-9
Vibration
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.
(Based upon MIL-STD-202 Method 201A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Discontinuity 1 μsec.(Max.)
5-10
Physical Shock
490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JISC0041/MIL-STD-202 Method 213B Cond. A)
6. Environmental Performance And Others
Test Description
Procedure
Requirement
6-1
Temperature Rise
Carrying rated current load.(Based upon UL 498)
30℃(Max.)
6-2
Heat Resistance
85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
6-3
Cold Resistance
-25±3℃,96 hours (Based upon JIS C0020)
6-4
Humidity
Temperature: 40±2℃
Relative Humidity : 90~95%
Duration: 96 hours
(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Insulation Resistance 100MΩ (Min.)
Dielectric Withstanding Voltage Must meet 4-3
6-5
Temperature Cycling
5 cycles of:
a) -55℃ 30 minutes
b) +85℃ 30 minutes
(Based upon JIS C0025)
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
6-6
Salt Spray
Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7
SO2 Gas
24 hours exposure to 50±5ppm.
SO2 gas at 40±2℃.
6-8
NH3 Gas
40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9
Solderability
Soldering Time: 5±0.5 sec.
Solder Temperature: 245±5℃
Solder Wetting 95% of immersed area must show no voids, pin holes
6-10
Resistance to Soldering Heat
Solder pot method
Soldering time: 10±0.5 sec.
Solder Temperature: 260±5℃
Solder iron method
Soldering Time: 5±0.5 sec.
Solder Temperature: 370℃ ~ 400℃
Appearance No Damage.
7. Actuator Insertion/Withdrawal Force
[Unit : kgf]
Circuits
At Initial
Circuits
At Initial
Insertion (Max.)
Withdrawal (Min.)
Insertion (Max.)
Withdrawal (Min.)
Single
0.70
0.20
10
7.00
2.80
02
1.40
0.50
11
7.70
3.05
03
2.10
0.75
12
8.40
3.30
04
2.80
1.10
14
9.80
3.90
05
3.50
1.35
16
11.20
4.40
06
4.20
1.60
18
12.60
5.00
07
4.90
1.90
20
14.00
5.60
08
5.60
2.20
22
15.40
6.10
09
6.30
2.50
24
16.80
6.70
3, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.
Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).
Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.
4, we can offer multiple, safe and fast shippment for you!
We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
20,000,000-24,999,999
Employee Number:
100~149
Ecer Certification：
Active Member
12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device... 12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device...
