Shenzhen Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T, Paypal |
| Supply Ability | 45000 pieces per month |
| Delivery Time | 6-7 working days |
| Packaging Details | Vacuum |
| Number of Layers | 4 |
| Glass Epoxy | RO4003C Tg280℃, er<3.48, Rogers Corp. |
| Final foil external: | 1oz |
| Final height of PCB: | 1.6 mm ±10% |
| Surface Finish | Immersion gold, 85% |
| Solder Mask Color: | Green |
| Colour of Component Legend | White |
| Test | 100% Electrical Test prior shipment |
| Brand Name | Bicheng Enterprise Limited |
| Model Number | BIC-0076-V3.6 |
| Certification | UL |
| Place of Origin | China |
View Detail Information
Explore similar products
Rogers High Frequency PCB Built on 20mil 0.508mm RO4350B With Immersion Gold and
Taconic High Frequency PCB Made on TLY-5 7.5mil 0.191mm With DK2.2 for
RT/Duroid 5880 10mil 0.254mm Rogers High Frequency PCB for Microstrip and
Taconic RF-60A PCB 60mil 1.5mm High Frequency PCB With Immersion Silver For
Product Specification
| Payment Terms | T/T, Paypal | Supply Ability | 45000 pieces per month |
| Delivery Time | 6-7 working days | Packaging Details | Vacuum |
| Number of Layers | 4 | Glass Epoxy | RO4003C Tg280℃, er<3.48, Rogers Corp. |
| Final foil external: | 1oz | Final height of PCB: | 1.6 mm ±10% |
| Surface Finish | Immersion gold, 85% | Solder Mask Color: | Green |
| Colour of Component Legend | White | Test | 100% Electrical Test prior shipment |
| Brand Name | Bicheng Enterprise Limited | Model Number | BIC-0076-V3.6 |
| Certification | UL | Place of Origin | China |
Hybrid High Frequency Multilayer PCB 4 Layer Hybrid PCB Board Bulit On Rogers 20mil RO4003C and FR-4
(PCB’s are custom-made products, the picture and parameters shown are just for reference)
Hello everyone,
Warm greetings!
Today we talk about 4-layer hybrid PCB built on 20mil RO4003C and FR-4.
Firstly, it's a 4 layer structure. Layer 1 to layer 2 is 20mil RO4003C core, which is the main wiring layer for the signal lines. Layer 3 to layer 4 is the core of FR-4, both cores are combined through 0.2mm prepeg. Each layer is connected by plated through holes. The inner layer and out layer of copper is 1 ounce. This is a good method to keep the board cost effective.
Let's take a look at its micro-section chart.
Here on the left is the PTH hole, the bottom is layer 1 to layer 2 which is high frequency material, the upper part is glass fiber material. The finished thickness of the plate is 1.6mm.
The color of solder mask and silkscreen are also commonly used in green and white. Surface finish on pads is immersion gold.
Following is another type of 20mil RO4003C hybrid PCB. It’s made of 2 cores of 20mil RO4003C.
The applications of 20mil RO4003C hybrid PCB is wide, such as LNA, optical coupler, balanced amplifier, duplexer etc.
The advantages of 20mil RO4003C hybrid PCB are reflected in following 3 points:
1) RO4003C exhibits a stable dielectric constant over a broad frequency range. This makes it an ideal substrate for broadband applications.
2) Reducing signal loss in high frequency application meets the development needs of communication technology.
3) Cost reduced over stack-ups with all low loss material;
Our PCB Capability (Hybrid Design)
| PCB Type: | Hybrid PCB, Mixed PCB |
| Mixed type: | RO4350B + FR4; |
| RO4003C + FR4; | |
| F4B + FR4; | |
| Duroid/RT5880 + RO4350B | |
| Duroid/RT5880 + FR4 | |
| Solder mask: | Green, Red, Blue, Black, Yellow |
| Layer count: | 4 Layer, 6 Layer, Multilayer |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 1.0-5.0mm |
| PCB size: | ≤400mm X 500mm |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin, OSP |
At present, the mature mixed pressing materials are as follows:
RO4350B + FR4;
RO4003C + FR4;
F4B + FR4;
RT/duroid5880 + FR4
RT/duroid5880 + RO4350B
Thank you for your reading. You’re welcome to contact us for your RF PCB enquiries.
| RO4003C Typical Value | |||||
| Property | RO4003C | Direction | Units | Condition | Test Method |
| Dielectric Constant,εProcess | 3.38±0.05 | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped Stripline | |
| Dielectric Constant,εDesign | 3.55 | Z | 8 to 40 GHz | Differential Phase Length Method | |
| Dissipation Factortan,δ | 0.0027 0.0021 | Z | 10 GHz/23℃ 2.5 GHz/23℃ | IPC-TM-650 2.5.5.5 | |
| Thermal Coefficient of ε | +40 | Z | ppm/℃ | -50℃to 150℃ | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 x 1010 | MΩ.cm | COND A | IPC-TM-650 2.5.17.1 | |
| Surface Resistivity | 4.2 x 109 | MΩ | COND A | IPC-TM-650 2.5.17.1 | |
| Electrical Strength | 31.2(780) | Z | Kv/mm(v/mil) | 0.51mm(0.020") | IPC-TM-650 2.5.6.2 |
| Tensile Modulus | 19,650(2,850) 19,450(2,821) | X Y | MPa(ksi) | RT | ASTM D 638 |
| Tensile Strength | 139(20.2) 100(14.5) | X Y | MPa(ksi) | RT | ASTM D 638 |
| Flexural Strength | 276 (40) | MPa (kpsi) | IPC-TM-650 2.4.4 | ||
| Dimensional Stability | <0.3 | X,Y | mm/m (mil/inch) | after etch+E2/150℃ | IPC-TM-650 2.4.39A |
| Coefficient of Thermal Expansion | 11 14 46 | X Y Z | ppm/℃ | -55℃to288℃ | IPC-TM-650 2.4.41 |
| Tg | >280 | ℃ TMA | A | IPC-TM-650 2.4.24.3 | |
| Td | 425 | ℃ TGA | ASTM D 3850 | ||
| Thermal Conductivity | 0.71 | W/M/oK | 80℃ | ASTM C518 | |
| Moisture Absorption | 0.06 | % | 48hrs immersion 0.060" sample Temperature 50℃ | ASTM D 570 | |
| Density | 1.79 | gm/cm3 | 23℃ | ASTM D 792 | |
| Copper Peel Stength | 1.05 (6.0) | N/mm (pli) | after solder float 1 oz. EDC Foil | IPC-TM-650 2.4.8 | |
| Flammability | N/A | UL 94 | |||
| Lead-free Process Compatible | Yes | ||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Site Member
Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm... Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm...
Get in touch with us
Leave a Message, we will call you back quickly!