Shenzhen Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T, Western Union |
| Supply Ability | 45000 pieces per month |
| Delivery Time | 10 working days |
| Packaging Details | Vacuum |
| Number of Layers | 2 |
| Glass Epoxy | RT/duroid 6006 |
| Final foil | 1.0 Oz |
| Final height of PCB | 1.3 mm ±10% |
| Surface Finish | HASL LF |
| Solder Mask Color | Green |
| Colour of Component Legend | White |
| Test | 100% Electrical Test prior shipment |
| Brand Name | Bicheng Technologies Limited |
| Model Number | BIC-0062-V0.1 |
| Certification | UL |
| Place of Origin | China |
View Detail Information
Explore similar products
TMM13i High Frequency Printed Circuit Board 60mil 1.524mm Rogers Higher DK12.85
TMM4 High Frequency Printed Circuit Board 60mil 1.524mm Rogers RF PCB DK4.5 With
Rogers TMM10i Microwave Printed Circuit Board 75mil 1.905mm RF PCB With Pure
TMM6 PCB Microwave Printed Circuit Board 50mil 1.27mm Rogers High Frequency PCB
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 45000 pieces per month |
| Delivery Time | 10 working days | Packaging Details | Vacuum |
| Number of Layers | 2 | Glass Epoxy | RT/duroid 6006 |
| Final foil | 1.0 Oz | Final height of PCB | 1.3 mm ±10% |
| Surface Finish | HASL LF | Solder Mask Color | Green |
| Colour of Component Legend | White | Test | 100% Electrical Test prior shipment |
| Brand Name | Bicheng Technologies Limited | Model Number | BIC-0062-V0.1 |
| Certification | UL | Place of Origin | China |
Rogers RT/duroid 6006 High Frequency PCB on 25mil, 50mil and 75mil Coating Immersion Gold and Green Mask for Ground Radar Warning
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Hi Guys,
Today we’re going to talk about Rogers 6006 PCB.
Rogers RT/duroid 6006 microwave laminates are ceramic-PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15.
PCB Capability (RT/duroid 6006)
| PCB Material: | Ceramic-PTFE composite |
| Designator: | RT/duroid 6006 |
| Dielectric constant: | 6.15 ±0.15 (process) |
| 6.45 (design) | |
| Layer count: | 1 Layer, 2 Layer |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 10mil (0.254mm), 25mil (0.635mm) |
| 50mil (1.27mm), 75mil (1.90mm) | |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Tin, Immersion Silver and OSP. |
RT/duroid 6006 microwave laminates feature ease of fabrication and stability in use. This property results in the possibility of mass production and reducing the cost of goods. It has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.
Features and Benefits
| 1. High dielectric constant for circuit size reduction |
| 2. Low loss. Ideal for operating at X-bank or below |
| 3. Tight DK and thickness control for repeatable circuit performance |
The typical applications are aircraft collision avoidance systems, ground radar warning systems, patch antennas, satellite communications systems etc.
Thank you for your reading.
Appendix: Properties of RT/duroid 6006 laminates.
| RT/duroid 6006 Typical Value | |||||
| Property | RT/duroid 6006 | Direction | Units | Condition | Test Method |
| Dielectric Constant,εProcess | 6.15±0.15 | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped stripline | |
| Dielectric Constant,εDesign | 6.45 | Z | 8GHz to 40 GHz | Differential Phase Length Method | |
| Dissipation Factor,tanδ | 0.0027 | Z | 10 GHz/A | IPC-TM-650 2.5.5.5 | |
| Thermal Coefficient of ε | -410 | Z | ppm/℃ | -50℃-170℃ | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 7 x 107 | Mohm.cm | A | IPC 2.5.17.1 | |
| Surface Resistivity | 2 x 107 | Mohm | A | IPC 2.5.17.1 | |
| Tensile Properties | ASTM D638 (0.1/min. strain rate) | ||||
| Young's Modulus | 627(91) 517(75) | X Y | MPa(kpsi) | A | |
| Ultimate Stress | 20(2.8) 17(2.5) | X Y | MPa(kpsi) | A | |
| Ultimate Strain | 12 to 13 4 to 6 | X Y | % | A | |
| Compressive Properties | ASTM D695 (0.05/min. strain rate) | ||||
| Young's Modulus | 1069 (115) | Z | MPa(kpsi) | A | |
| Ultimate Stress | 54(7.9) | Z | MPa(kpsi) | A | |
| Ultimate Strain | 33 | Z | % | ||
| Flexural Modulus | 2634 (382) 1951 (283) | X | MPa(kpsi) | A | ASTM D790 |
| Ultimate Stress | 38 (5.5) | X Y | MPa(kpsi) | A | |
| Deformation under load | 0.33 2.1 | Z Z | % | 24hr/50℃/7MPa 24hr/150℃/7MPa | ASTM D261 |
| Moisture Absorption | 0.05 | % | D48/50℃ 0.050"(1.27mm) thick | IPC-TM-650 2.6.2.1 | |
| Thermal Conductivity | 0.49 | W/m/k | 80℃ | ASTM C518 | |
| Coefficient of Thermal Expansion | 47 34 117 | X Y Z | ppm/℃ | 23℃/50% RH | IPC-TM-650 2.4.41 |
| Td | 500 | ℃ TGA | ASTM D3850 | ||
| Density | 2.7 | g/cm3 | ASTM D792 | ||
| Specific Heat | 0.97(0.231) | j/g/k (BTU/ib/OF) | Calculated | ||
| Copper Peel | 14.3 (2.5) | pli (N/mm) | after solder float | IPC-TM-650 2.4.8 | |
| Flammability | V-0 | UL 94 | |||
| Lead-free Process Compatible | Yes | ||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Site Member
Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm... Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm...
Get in touch with us
Leave a Message, we will call you back quickly!