Anterwell Technology Ltd.
| Payment Terms | T/T, Western Union, Paypal |
| Supply Ability | 8600pcs |
| Delivery Time | 1 day |
| Packaging Details | Please contact me for details |
| VDD POWER | 3.3 V, 5 V |
| MAX Operating Temperature | + 85°C |
| Min Operating Temperature | - 40 °C |
| working current | 2 mA |
| Power supply - Max | 5.5V |
| Power supply - Min | 2.5 V |
| packing | reel |
| series | M93S46-W |
| Brand Name | Anterwell |
| Model Number | M93S46-WMN6TP |
| Certification | new & original |
| Place of Origin | original factory |
View Detail Information
Explore similar products
IC Integrated Circuit Chip UPC311C , 8 PIN Electronics IC Chips
MAX1771CSA Integrated Circuit Chip 12V or Adjustable, High-Efficiency, Low IQ,
MC33179D amplifier ic chip Integrated Circuit Chip HIGH OUTPUT CURRENT LOW NOISE
AM27C256-55DC 256 Kilobit (32 K x 8-Bit) CMOS EPRO holt integrated circuits
Product Specification
| Payment Terms | T/T, Western Union, Paypal | Supply Ability | 8600pcs |
| Delivery Time | 1 day | Packaging Details | Please contact me for details |
| VDD POWER | 3.3 V, 5 V | MAX Operating Temperature | + 85°C |
| Min Operating Temperature | - 40 °C | working current | 2 mA |
| Power supply - Max | 5.5V | Power supply - Min | 2.5 V |
| packing | reel | series | M93S46-W |
| Brand Name | Anterwell | Model Number | M93S46-WMN6TP |
| Certification | new & original | Place of Origin | original factory |
| High Light | electronics ic chip ，integrated circuit ic | ||
M93S46-WMN6TP MICROWIRE Serial Access EEPROM with Block Protection
FEATURES SUMMARY
Industry Standard MICROWIRE Bus
Single Supply Voltage: – 4.5 to 5.5V for M93Sx6 – 2.5 to 5.5V for M93Sx6-W – 1.8 to 5.5V for M93Sx6-R Single Organization: by Word (x16)
Programming Instructions that work on: Word or Entire Memory
Self-timed Programming Cycle with AutoErase
User Defined Write Protected Area
Page Write Mode (4 words)
Ready/Busy Signal During Programming
Speed:
– 1MHz Clock Rate, 10ms Write Time (Current product, identified by process identification letter F or M) – 2MHz Clock Rate, 5ms Write Time (New Product, identified by process identification letter W or G) Sequential Read Operation
Enhanced ESD/Latch-Up Behavior
More than 1 Million Erase/Write Cycles
More than 40 Year Data Retention
SUMMARY DESCRIPTION
This specification covers a range of 4K, 2K, 1K bit serial Electrically Erasable Programmable Memory (EEPROM) products (respectively for M93S66, M93S56, M93S46). In this text, these products are collectively referred to as M93Sx6.
The M93Sx6 is accessed through a serial input (D) and output (Q) using the MICROWIRE bus protocol. The memory is divided into 256, 128, 64 x16 bit words (respectively for M93S66, M93S56, M93S46). The M93Sx6 is accessed by a set of instructions which includes Read, Write, Page Write, Write All and instructions used to set the memory protection. These are summarized in Table 2. and Table 3.). A Read Data from Memory (READ) instruction loads the address of the first word to be read into an internal address pointer. The data contained at this address is then clocked out serially. The address pointer is automatically incremented after the data is output and, if the Chip Select Input (S) is held High, the M93Sx6 can output a sequential stream of data words. In this way, the memory can be read as a data stream from 16 to 4096 bits (for the M93S66), or continuously as the address counter automatically rolls over to 00h when the highest address is reached. Within the time required by a programming cycle (tW), up to 4 words may be written with help of the Page Write instruction. the whole memory may also be erased, or set to a predetermined pattern, by using the Write All instruction. Within the memory, a user defined area may be protected against further Write instructions. The size of this area is defined by the content of a Protection Register, located outside of the memory array. As a final protection step, data may be permanently protected by programming a One Time Programming bit (OTP bit) which locks the Protection Register content. Programming is internally self-timed (the external clock signal on Serial Clock (C) may be stopped or left running after the start of a Write cycle) and does not require an erase cycle prior to the Write instruction. The Write instruction writes 16 bits at a time into one of the word locations of the M93Sx6, the Page Write instruction writes up to 4 words of 16 bits to sequential locations, assuming in both cases that all addresses are outside the Write Protected area. After the start of the programming cycle, a Busy/Ready signal is available on Serial Data Output (Q) when Chip Select Input (S) is driven High.
Company Details
Business Type:
Distributor/Wholesaler,Trading Company
Year Established:
2004
Total Annual:
500000-1000000
Employee Number:
20~30
Ecer Certification：
Site Member
King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ... King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ...
Get in touch with us
Leave a Message, we will call you back quickly!