84.01 Baking Powder Sodium Bicarbonate Inorganic Raw Materials NaHCO3

Product Specification

 NaHCO₃ Monoclinic Crystalline Powder Inorganic Raw Materials Sodium Bicarbonate for Various Uses
 
Product Introduction:
 
Baking soda, also known as sodium bicarbonate, commonly referred to as "baking soda", "baking powder", or "heavy soda", is a small white crystal with a lower solubility in water than sodium carbonate. It is an industrial chemical that may be toxic. The solid gradually decomposes above 50 ℃ to produce sodium carbonate, carbon dioxide, and water, and completely decomposes at 440 ℃. Sodium bicarbonate is an acidic salt formed by the neutralization of strong and weak acids, and it exhibits weak alkalinity when dissolved in water. This characteristic can make it a leavening agent in the food production process. Sodium bicarbonate will leave residual sodium carbonate after action, and excessive use can cause the finished product to have an alkaline taste.
 

 
 
 
Basic Product Information:

 
 
 
Product Usage:
 
Sodium bicarbonate can be directly used as a raw material in the pharmaceutical industry to treat excessive stomach acid. It can also be used in film production, tanning, mineral processing, smelting, metal heat treatment, as well as in the fiber and rubber industries. Simultaneously used as a detergent for wool and for agricultural seed soaking. One of the most widely used loosening agents in the food industry, it is used in the production of biscuits, cakes, Mantou, bread, etc. It is a carbon dioxide generator in soft drinks; It can be combined with alum to form alkaline fermentation powder, or with soda ash to form civil stone alkali; It can also be used as a butter preservative. Fire fighting equipment is used to produce acid alkali fire extinguishers and foam fire extinguishers. The rubber industry uses it in combination with alum and H pore forming agents to achieve uniform pore formation in the production of rubber and sponge. Used as a flux for casting steel ingots in the metallurgical industry. Used as a molding aid for cast steel (sand casting) sand molds in the mechanical industry. Used in the printing and dyeing industry as a fixing agent, acid-base buffering agent, and post-treatment agent for fabric dyeing and finishing. Adding baking soda during dyeing can prevent yarn from producing color spots. The pharmaceutical industry uses it as a raw material for acid making agents.
 
Used as a fermentation agent for analytical reagents, inorganic synthesis, pharmaceutical industry, treatment of acidosis, and food industry, a generator of carbon dioxide in soda and cold drinks, and a preservative for butter. It can be directly used as raw material for pharmaceutical industry, detergent for wool, foam fire extinguishing agent, bath agent, alkaline agent and bulking agent. Often formulated with ammonium bicarbonate as a leavening agent for biscuits and pastries. The addition amount in wheat flour is 20g/ Kg. Can be used as a foaming agent to prepare solid refreshing beverages with citric acid, tartaric acid, etc. (producing CO2). As a harmless weak alkaline agent, adding about 0.1% to 0.2% when washing vegetables can stabilize the green color. When used alone, it becomes strongly alkaline due to thermal decomposition, and when used for bread, it will turn yellow and destroy the vitamins in wheat. It is best to use it in combination with acidic substances such as calcium hydrogen phosphate. It can also be used for food blanching and removing astringency. Because it can increase the pH value, it can improve the water holding capacity of proteins, promote softening of food tissue cells, and facilitate the dissolution of astringent ingredients. It has a deodorizing effect on goat milk (dosage 10-20mg/kg). As an acidity regulator and chemical leavening agent, it can be used in various foods that require the addition of leavening agents according to Chinese regulations, and can be used in moderation according to production needs