ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.
| Delivery Time | 30 days |
| Packaging Details | 100 meters per roll in carton |
| Pulling modulus of elasticity | ≥1500 MPa |
| Bending strength | ≥30 MPa |
| tensile strength | Above 25Mpa |
| Mixing ratio | 2:1 |
| Color | Grey |
| Viscosity | 120-500 Pa.s |
| Brand Name | XINCHOR |
| Model Number | XQ-GF21 |
| Place of Origin | China |
View Detail Information
Explore similar products
Latex Based Concrete Gap Sealer , Concrete Leak Sealer Grouting Self Leveling
Low Modulus Concrete Crack Sealer 1kg 2kgs Package Flexible Durable Excellent
1 Gallon Crack Flex Concrete Sealant Water Repellent Prevent Further Damage
Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth
Product Specification
| Delivery Time | 30 days | Packaging Details | 100 meters per roll in carton |
| Pulling modulus of elasticity | ≥1500 MPa | Bending strength | ≥30 MPa |
| tensile strength | Above 25Mpa | Mixing ratio | 2:1 |
| Color | Grey | Viscosity | 120-500 Pa.s |
| Brand Name | XINCHOR | Model Number | XQ-GF21 |
| Place of Origin | China | ||
| High Light | concrete gap sealer ，polyurethane concrete crack sealant | ||
Low Viscosity Epoxy Concrete Crack Sealer For Surface Repairing
Concrete Crack Repairing Grout Epoxy
Crack Repair Grouting adhesive
Low Viscosity Epoxy Concrete Crack Sealer For Surface Repairing
Mainly used for concrete crack grouting,repairing,reinforcement of beam, floor, pole and basement of building, bridge and roadway. It is two components injection adhesive, mainly with modified epoxy resin and can be hardened at room temperature.
Range of Application
Repairing the hollow parts of the wall and ground of cement and mortar, ceramics and stones Crack repairing for the concrete buildings, such as prefabricated components, equipment, silos, reservoirs, dams, bridges, tunnels, pipes, concrete pavement.
Repairing and reinforcement of the concrete crack on outer and inner walls, roof, beam, pole and floor.
Features
Product performance
Appearance
Part A (main): transparent liquid
Part B (hardener): brown transparent liquid
Mixing viscosity: 120-500 Pa.s
Hardened density: 1.10 +/- 0.10g/cm3
Mixing ratio (weight): 2:1
Handling time (25℃): ≥30min
Hardening time: 3 hours
Shelf time: 24 months
Product Performance
1 Main Performance
| Testing | Testing condition | Index |
| Gel Performance | ||
| Tensile strength | Tested under (23±2)℃,(50±5)% RH upon 7 days maintenance after processing | ≥25 MPa |
| Pulling modulus of elasticity | ≥1.5×103 MPa | |
| Elongation | ≥1.7% | |
| Bending strength | ≥30 MPa no broken damage | |
| Compressive Strength | ≥50 MPa | |
| Bonding Ability | ||
| Steel-steel tensile shearing strength | Maintenance for 7 days after processing, tested under (23±2)℃, (50±5)% RH condition | ≥15 MPa |
| Steel-steel docking tensile strength | ≥20 MPa | |
| Non volatile content (solid) | ≥99 % | |
Processing Flow
Crack confirmation and marking → Crack treatment → Seal the crack and fix the injection gun base
→ mix the adhesive according to the ratio → low pressure injection → hardening and maintenance
The interval setting according to the crack width as blow:
|
Crack width (mm) | Interval (mm) | ||
| Min. | Standard | Max. | |
| 0.05-0.2 | 150 | 200 | 250 |
| 0.2-3.0 | 250 | 300 | 350 |
Packaging and Logistics
1. Two components packed separately, the mixing ratio is 2:1
2. Shall be stored in cool (under 25℃), dry and ventilated place, no exceed 1 year.
3. This product is not a dangerous goods, can be shipped as normal chemical materials.
Attention
Shall be stored in cool, dry and ventilated place, avoid sun exposure and high temperature
Do not mix too much at each time, use upon actual necessary
If touched by skin, clean with acetone and washed by water immediately
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2005
Total Annual:
10,000,000-30,000,000
Employee Number:
50~100
Ecer Certification：
Site Member
Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive. Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 ho... Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive. Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 ho...
Get in touch with us
Leave a Message, we will call you back quickly!