0.6Mpa Air Pressure Bottle Filling And Sealing Machine 250 - 1500ml Filling

Product Specification

CGF12-12-6 Bottle Water Washing Filling and Sealing Machine

CGF12-12-6 washing, filling and sealing 3 in 1 machine, is the collection for many years the production of washing, filling and sealing triad all-in-onetrine one practice experience, again and again to absorb all the user's opinion, draw lessons from foreign advanced technology to develop new equipment.It conforms to the customer on one machine for different type bottle filling requirements, adopts hanging card bottleneck method, to make changing bottle type, convenient and quick.It is mainly used for gas free drinks (pure water, mineral water, etc.) of washing, filling and sealing.

The technical and parameters

1,Production capacity: 3000-4000 b/H
2,Filling capacity: 250-1500 ml
3, Positioning methods: liquid surface positioning
4,Bottle specifications: bottle diameter:50-92mm,bottle height:150-300mm, PVC,PET type bottle

5,Mode of transmission:Y112M-4 3KW Motor→Triangular belt drive→WPO100 type worm-gear reducer(I=30:1)

6,The main structure and characteristics of equipment

(1),Supply washing bottles and manipulator 12 sets,Equipped with rotary seal flush inside and outside for bottle,Backwater institutions.

(2),Filling valve:12

(3),Cap sorter,one set

(4),Magnetic reverse all tooth spiral six sets of modesty, when more than tuned magnetic torque, screw LIDS automatic sliding, ensure that tighten without harming the cap

(5),Dial the bottle safety device 4 sets,no bottle,no filling,no capping,

(6),Host adopts advanced frequency control of motor speed control technology;

7,Total power:3.7kw

8,Water consumption: flush with water≤1T/H+Filling water 1-2T/H

9,Air pressure:0.6Mpa

10,Weight:1500kg

11,Overall Dimension:2000x1200x2200mm

Equipment structure

CGF12-12-6 washing, filling and sealing triad units is mainly composed of 11 outside working parts.(1) the frame parts(2) in and out of the bottle components(3) the pliers hand parts(4) washing parts(5) filling driving part(6) filling valve components(7) catching cover parts(8)Finishing cap parts

(9) screw cap parts(10) slide groove(11) out of the bottle conveying frame(12) the wind to send

The working principle

CGF12-12-6 washing,filling and sealing triad units according to their main functions can be divided into three parts.

A,Washing part

Wash part consists of clamp parts and manifold parts.The wind to blow the bottle into the bottle feeding wheel, round the bottle into the clip manipulator, jaw to catch up the bottleneck, pliers hand under the guidance of guide rail, make the bottle turn 180 ° in upright position, after washing bottle, through the secondary dial the bottle into the filling station.(a total of 8 sets of pliers hand).Manifold components assigned by the upper wear ring and the lower plate of parts, such as wearing ring is high pressure spring pressure on the distribution of the lower plate, tray has eight outlet, wearing ring on long hole for water, blunt water is 2.

B,Filling part
Filling part is mainly composed of filling valve parts, transmission parts, liquid filling parts, etc.After a wash bottle through dial the bottle round into a filling station, at the same time live move up the bottle, bottle filling machine card interface card sealed bottle, filling valve opens.The liquid into the bottle, when the liquid level to the bottle filling valve back to the trachea, stop filling.Fluid by the water pump in the cylinder into, the pump is installed on the cylinder head of liquid level control, low level into the liquid, liquid level with the pump stop working automatically.

C,Screw cover part
Screw cap part consists of 3 sets of screw LIDS, screw cap transmission parts, lower cover tube and cover parts.Complete filling SuPing by dial the bottle round into the screw cap station.At the same time when the bottle is in front of the dial wheel driven into the screw cap station, detection inside the bottle liquid level of the photoelectric sensor, signal, lower cover tube put cover on the cylinder is opened, blowing blowing valve cover, make the cap into the dial plate, magnetic torque screw LIDS, falling seize the bottle caps, grasp the cover screw LIDS drop on the bottle head screw cap.When more than tuned magnetic torque, screw LIDS automatic sliding, thus protecting the cap not a screw cap set of strain.Complete the screw cap of the bottle by dial the bottle round output to the conveyor belt.On the lower cover tube with two photoelectric sensors.A control principle above GaiQi start, stop, do the cover full GaiQi stop, lid GaiQi start, less to protect manage cover motor and save compressed air;Following a stop device for lack of cover, prevent short of cover filled the bottle to the conveyor belt.For horizontal pneumatic principle for cap machine, fast under cover, it does not hurt cover, back cover through the cover return pipe automatic recovery into cap sorter