Xinxiang SIMO Blower Co., Ltd.
| Payment Terms | T/T, L/C, Payment Term Is Negotiable |
| Supply Ability | 500 Sets Per Month |
| Delivery Time | 15-35 Days |
| Packaging Details | Export Wooden Case Packing, Steel pallet Packing |
| Type | Centrifugal Fan |
| System Type | Single inlet, Overhang type |
| Impeller test | Ultrasonic flaw detection |
| After-sales Service Provided | Field installation, commissioning and training |
| Warranty | 1 Year |
| Medium | Clean air/Dusty air |
| Brand Name | SIMO |
| Model Number | SIMO Blower 5-06 |
| Certification | CE, ISO9001:2008,TUV |
| Place of Origin | Henan China |
View Detail Information
Explore similar products
Industrial Rotary Kilns Heavy Duty Centrifugal Fans Backward Blade
High Pressure Heavy Duty Centrifugal Fans Stainless Steel Blower
Heat Dissipation Forced Draught Fan In Boiler Centrifugal Exhaust Fan
Backward Heavy Duty Centrifugal Fans V Belt Belt Driven Centrifugal Fan
Product Specification
| Payment Terms | T/T, L/C, Payment Term Is Negotiable | Supply Ability | 500 Sets Per Month |
| Delivery Time | 15-35 Days | Packaging Details | Export Wooden Case Packing, Steel pallet Packing |
| Type | Centrifugal Fan | System Type | Single inlet, Overhang type |
| Impeller test | Ultrasonic flaw detection | After-sales Service Provided | Field installation, commissioning and training |
| Warranty | 1 Year | Medium | Clean air/Dusty air |
| Brand Name | SIMO | Model Number | SIMO Blower 5-06 |
| Certification | CE, ISO9001:2008,TUV | Place of Origin | Henan China |
| High Light | single inlet single width centrifugal fan ，backward centrifugal fan | ||
Brick Kiln Combustible Gas Delivery Heavy Duty Centrifugal Blower Fan
Introduction
The 5-06 series Heavy Duty Centrifugal Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace.
This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles.
Brick Kiln Combustible Gas Delivery Heavy Duty Centrifugal Blower Fan can be used for more than four years when the concentration of impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it will shorten the service life.
The maximum operating temperature of the induced draft fan must not exceed 250°C.
The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency.
Technical data
| PRODUCT PARAMETERS | |||
| Centrifugal Fan Application | Temperature | Normal temperature air, Hot air | |
| Air composition | Clean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials | ||
| Centrifugal Fan Performance | Impeller diameter | 280~1600 | mm |
| Speed of mainshaft | ≤3000 | rpm | |
| Pressure range | 720~6531 | Pa | |
| Flow range | 1966~194499 | m3/h | |
| Centrifugal Fan Structure | Blade | Backward | |
| Impeller support | SWSI (Single Width, Single Inlet), Impeller overhung. | ||
| Drivetrain | Coupling | Can assign | |
| Lubrication | Oil bath lubrication | ||
| Bearing cooling | Air cooling, Water cooling, Oil cooling | ||
| Centrifugal Fan Systemconfiguration | Motor | ABB, SIEMENS, WEG, TECO, SIMO, Chinese brand… |
Can assign |
| Impeller | Q235, Q345, SS304, SS316, HG785, DB685... | ||
| Casing, Air inlet cone, Air inlet damper | Q235, Q345, SS304, SS316, HG785, DB685... | ||
| Main shaft | 45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel... | ||
| Bearing | FAG, SKF, NSK, ZWZ… | ||
| Centrifugal Fan Optionalcomponents | System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator, Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,System monitoring Instrument, Lube system, Overhead lube tank etc | ||
Advantages and Features
1. Centrifugal Blower Fan Impeller:
12 pieces of backward aerofoil blades are welded between the Arc cone front plate and the flat shaped rear plate. Because of the use of airfoil blades, the fan is guaranteed to have high efficiency, low noise and high strength. The impeller is corrected by static and dynamic balance, so the operation is stable. Forced draught fan and induced draught fan of the same machine number have same impeller structure.
2. Centrifugal Blower Fan Casing:
The casing is a volute welded by ordinary steel plates.
The casing of a single suction fan is made in three different forms: The No. 8 to 12 casing is made into an integral structure and cannot be disassembled; The No. 14 to 16 casing is made into a two open structure; The No. 18~29.5 casing is made into a three open structure.
The induced draft fan and the volute plate are appropriately thickened to prevent wear.
3. Centrifugal Blower Fan Inlet:
The converging and streamlined air inlet is made into a unitary structure and bolted to the inlet side of the fan.
4. Centrifugal Blower Fan Adjustment door:
A device for regulating the flow of the fan, axially mounted in front of the air inlet. The adjustment range is from 0° (full open) to 90°(fully closed).
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
3500000-5000000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Xinxiang SIMO Blower Co., Ltd. was founded in 2008, located in Xinxiang city, Henan province. SIMO is a professional manufacturer engaged in the research, development, production, sale and service of centrifugal fans, axial fans, blower fan parts. As the senior member of China General Machinery Indu... Xinxiang SIMO Blower Co., Ltd. was founded in 2008, located in Xinxiang city, Henan province. SIMO is a professional manufacturer engaged in the research, development, production, sale and service of centrifugal fans, axial fans, blower fan parts. As the senior member of China General Machinery Indu...
Get in touch with us
Leave a Message, we will call you back quickly!