AS1657 Standard Anti Skid Steel Stair Treads Grating 100mm For Parking Lot

Product Specification

AS1657 Standard Anti Skid Steel Stair Treads Grating 100mm For Parking Lot

Steel Stair Tooth For Parking Lot Anti-Skid Stair Treads Steel Grating

Steel Grate Stair Treads Introduction

The ladder pedal has four forms according to the front guard or not and the connection mode with the ladder beam, which are expressed as T1, T2, T3 and T4.From an economic point of view, it is recommended that modulus widths (125, 155, 185, 215, 245, 275 for Series 1) be used whenever possible.Series 2 uses 125, 165, 205, 245, 275mm, etc.) in 100mm multiples (such as 500, 600, 700, 800, 900, 1000, 1200mm, etc.).Step plate tolerance: width W±3mm, length L-3mm.

(1) commonly used stairs width is 700mm, 800mm, 900mm;
Width is 600mm, width should not be greater than 1200mm.
(2) for a single person through the stairs, the width between the two inclined beams or guardrail should not be less than 600mm.
(3) When the stairs frequently bear several people crossing at the same time or used as an evacuation route for personnel, the width of the stairs should be increased to 1200mm.
(4) The step plate is made of steel grid plate, and the type of steel grid plate can be selected according to Appendix E.
(5) the abrupt edge of the stair step should be able to bear the load of 1.5KN, when the width is not more than 1200mm, the load acts on the 100mm×100mm area;
When the width is greater than 1200mm, load 1.5KN in each symmetric 600mm place, the deflection of the stair step plate should not exceed 1/500 of the span.
(6) the stair pedal and the ladder platform should have good anti-skid performance.
(7) the tower connecting part of the vertical projection of the two adjacent stairs step plates should not be less than 10mm.
(8) The link between the step plate and the staircase is fixed by welding or bolt, as shown in Figure A.1.
When fixed by bolts, the bolt size shall not be less than M10.

Steel Grate Stair Treads Specifications

Material type: G is carbon steel
BG is stainless steel
Bar spacing: 100mm (center spacing)
50mm (center spacing)
Bar size: commonly used 6×6 twisted square steel
5×5 twisted square steel for small size steel grid
Stainless steel commonly used Φ5mm round steel
Flat steel size: commonly used 20×3mm to 75×6mm and other specifications
Flat spacing: Series 1 30mm (center spacing)
Series 2 40mm (center pitch)
Series 3 60mm (center pitch)
Flat steel type: P for ordinary flat type (can be written)
S is the tooth profile to strengthen anti-skid
Surface treatment: G is hot dip zinc
U refers to surface non-treatment (can be omitted)
For example: T1G253/30/100PG and above are hot dip galvanized T1 'stepping plates with 25×3 ordinary flat steel, flat steel spacing of 30mm and bar spacing of 100.

Steel Grate Stair Treads Application

Widely used in chemical machinery, pharmaceutical equipment, food and beverage machinery, Harvester, dry cleaning machine, ironing table, silencer, refrigeration equipment (central air conditioning) speaker, handicraft production, paper making, hydraulic accessories, filtration equipment and other industries.

Steel Grate Stair Treads Advantages

(1) the installation of the stepping plate is very simple and does not require complex installation;
(2) Good ventilation, lighting, heat dissipation, explosion-proof and skid-proof performance;
(3) the high strength, light structure of the stepping plate, durable;
(4) durable and beautiful appearance, beautiful surface luster;
(5) maintenance is very simple, prevent accumulation of dirt.

Package delivery:
Delivery when will we have a professional inspectors to check the quality of the product is unqualified, such as qualified will paste the qualified product certificate, and then fixed by shipping packaging, packaging with the steel plate on the metal tray, and then fixed with metal packing tape, finally wrapped by plastic film packaging, general each pallet packing 1-2 tons of cargo, in order to convenient for unloading and storage after the arrival of the goods. The unqualified products will be recalled by our quality inspector.
 

Pre-sale service:

After the customer orders, we will have professional technical personnel to contact with the customer, in order to meet the customer's technical inquiry and production schedule.

After-sales:
After the goods are shipped, we will have professional technical personnel to docking with customers, so that when the goods arrive, there will be unloading problems, storage and installation problems. Our technical personnel will reply online within 24 hours. If there is a problem, we will docking within 2 hours and help customers solve the problem within 5 hours.