JIAXING JICHENG MACHINERY CO.,LTD.
| Supply Ability | 1set per month |
| Delivery Time | 120days |
| Packaging Details | standrad export packing |
| material | copper or copper alloy |
| color | optional |
| rolling size | 20mm-8mm |
| delivery time | 120days |
| power | 180kw |
| size for machine | 12000*6000*2300mm |
| capacity | 2.5ton/hour |
| speed | 1.6m/s |
| weight | 20ton |
| Brand Name | EV |
| Model Number | JC-RM248(Ф20-Ф8)-10P-2C |
| Place of Origin | China |
View Detail Information
Explore similar products
JC-RM248 Metal Rolling Mill 8mm-4mm Rolling Size PLC Operation method
High Efficiency Copper Rod Metal Rolling Mill Alloy Metal 17-8mm Drawing Machine
Multifunction 20mm - 8mm Copper Wire Rod Metal Rolling Mill 200kw
20mm - 8mm Two Roller Cold Rolling Mill For Oxygen Free Copper Rod
Product Specification
| Supply Ability | 1set per month | Delivery Time | 120days |
| Packaging Details | standrad export packing | material | copper or copper alloy |
| color | optional | rolling size | 20mm-8mm |
| delivery time | 120days | power | 180kw |
| size for machine | 12000*6000*2300mm | capacity | 2.5ton/hour |
| speed | 1.6m/s | weight | 20ton |
| Brand Name | EV | Model Number | JC-RM248(Ф20-Ф8)-10P-2C |
| Place of Origin | China | ||
| High Light | rod rolling machine ，2 high rolling mill | ||
Multifunctional 2 Roller Cold Metal Rolling Mill For 20mm - 8mm Metal Wire
Feature
1. The machine is for rolling. The rod after rolling can greatly improve mechanical property and remedy defect from casting. This speed can reach to 5m/s for this series.
2. The most important thing of mental process craft is forming system technology. It plays a more and more remarkable role in modern manufacture process, at the present, the rolling machine usually use big motor or huge and bulky multistage mechanical transmission mechanism. The mechanism depends on fixed gear and belt for transmission and limit the speed of rolling for process unit and transmission mechanism. This system can only make single material. For example, copper rod mill can not roll aluminum rod. Different section need special machine to make, present system can not process special ally machine and so on, meanwhile,big transmission cases drive some frames to work but excessive current will waste more resources. Transmission system in cases will happen to abrasion when it has ling time to work, in the process, it may have some problems for instability, push and pull to influence product quality. Besides, process device and mechanism are setting not reasonably. It may take a lot of time and increase worker’s diffculties to change the roller. We need to reform and innovate available equipment because it will not meet modem enterprise’s requirements, from the market survey and demand, we haven’t have this practical application.in order to meet the demand of market, we must develop a mental machine system with multifunctional and small cross section.
3. The machine designed by us is each stand driven by separate frequency motor or servo motor, so each stand still is sync after changing the rolling pass of and rotation speed. Process roller can change the pass, and each rotation speed can be set on touch screen.thus, under the premise of meeting stand’s strength,two-roller cold rolling mill can roll different size of copper rod. Different material also. Like 17mm-8mm,or 14.4-8mm,or 12.5-6.8mm or 8-4mm. Its same like Germany’s.
Main Parameter
| No. | item | Parameter |
| 1 | Model: | Copper rod cold rolling mill, copper alloy cold rolling mill. Other metal rod cold rolling mill, other alloy cold rolling mill,copper / aluminum continuous casting and rolling etc. |
| 2 | Input dia | Ф55mm,Ф35mm,Ф25mm,Ф20mm,Ф17mm,Ф16mm,Ф14.4mm,Ф12.5mm,Ф8mm etc. |
| 3 | Output dia | Ф20mm,Ф18mm,Ф17mm,Ф8mm,Ф6mm,Ф5mm,Ф4mm,Ф3 mm etc. |
| 4 | Outlet rod out of roundness | No more than 0.2mm after rolling, or more accurate |
| 5 | Rolling pass | 2-16 or as each customer’s requirements |
| 6 | Rolling speed | Max 3M/s for continuous rolling, Max 5M/s for discontinuous rolling. |
| 7 | Pass schedule | ellipse-round hole type system or triangular -round type system |
| 8 | total extend compression ratio | 2-10, or as each customer’s requirements |
| 9 | each pass compression ratio | 1.15～1.4(hole type can change) |
| 10 | Total power | 100kw～500kw |
| 11 | Running mode | Each frame separate transmission speed controlled by frequency or AC servo |
| 12 | Operation mode | PLC control, touch screen display,can improve to DCS control or networking |
| 13 | type | 2 high horizontal- vertical or 3 high positive triangle-inverted triangle |
| 14 | nominal roller dia | Ф200mm(double-groove/multi-groove),Ф248mm(double-groove/multi-groove),Ф264mm,Ф300mm,Ф370mm,Ф400mm etc. |
| 15 | No. of frame | 2-16 or more |
| 16 | Main motor | 11kw-110kw AC frequency motor or AV servo motor for each |
| 17 | roller material | other imported material etc. |
| 18 | rolling mill size | a complete production line: length 18m *width 6 m*height 2.5m Main machine : length 7.6m*width 2.3m *height 2m |
| 19 | height of center | height from the ground 1230mm |
some questions maybe you are interested in
1.What’s the system about Two-high mill and 3 roll mill?
Two-high mill pass system for: ellipse-round hole type system ; Three roll mill pass system : triangle -round system
2.The roundness of outlet rod is very big by the rolling mill,is it right?
NO, no more than 2mm.
3. Is it very difficult to operate the rolling machine ?
No.just need one person and the machine is very easy to be operated.
4 .what’s the main different between rolling mill and extrusion machine?
Rolling mill belong to cold process,extrusion machine belong to hot process.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller
Year Established:
2016
Total Annual:
1000000.00-1700000.00
Ecer Certification：
Verified Supplier
jiaxing Jicheng Machinery Co., Ltd is established in 2000, and located in Jiaxing city of Zhejiang. Nearby Hangzhou, Suzhou, Ningbo and other cities, it is located in the center of shanghai-hangzhou and suzhou-hangzhou traffic trunk lines, whose traffic is extremely convenient. The company is a prof... jiaxing Jicheng Machinery Co., Ltd is established in 2000, and located in Jiaxing city of Zhejiang. Nearby Hangzhou, Suzhou, Ningbo and other cities, it is located in the center of shanghai-hangzhou and suzhou-hangzhou traffic trunk lines, whose traffic is extremely convenient. The company is a prof...
Get in touch with us
Leave a Message, we will call you back quickly!