CAS Energy Co.,Ltd.
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 50000pks/month |
| Delivery Time | 25-35days |
| Packaging Details | carton package |
| Rate Voltage | 12.8V |
| Rate Capacity | 10Ah |
| Weight | 1.8kg |
| Dimension | custom |
| Cycle time | 4000times |
| Application | Energy Storage,ups,solar street light |
| Composed type | 4S1P |
| Material | Lithium |
| Brand Name | CAS Energy |
| Model Number | CAS-1210 |
| Certification | UL,CE,MSDS |
| Place of Origin | Foshan,China |
View Detail Information
Explore similar products
Deep cycle rechargeable 12V lithium ion solar energy storage lifepo4 12V 100Ah
Solar System 18650 li ion Battery Pack 12v 100ah for off grid
Rechargeable Deep Cycle Lithium Storage Battery Solar Use 12V 5Ah for Solar
5ah-600ah rechargeable 12V lithium ion battery pack for car bicycle UPS
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, MoneyGram | Supply Ability | 50000pks/month |
| Delivery Time | 25-35days | Packaging Details | carton package |
| Rate Voltage | 12.8V | Rate Capacity | 10Ah |
| Weight | 1.8kg | Dimension | custom |
| Cycle time | 4000times | Application | Energy Storage,ups,solar street light |
| Composed type | 4S1P | Material | Lithium |
| Brand Name | CAS Energy | Model Number | CAS-1210 |
| Certification | UL,CE,MSDS | Place of Origin | Foshan,China |
lifepo4 battery cheap price 18650 12V 10AH battery For solar energy
1. Built-in automatic protection for over-charge, over-discharge and over-temperature conditions
2. Intra-module balancing
3. Maintenance-free
4. Thousands of cycles, under normal conditions
5. Can be charged using most standard lead-acid chargers
Product Description:
| modelca | cas1210 |
| type | Li-ion battery with PCM |
| Nominal voltage | 12 volt |
| Typical capacity | 10000mah |
| Input | 12.6 v |
| Out-put | 12.6-9V |
| Max continuous charge/discharge current | 3A(adjustable) |
| Charger Included | 2A charger:US plug/EU plug/UK plug |
| Connectors | 5.5*2.1mm DC jack+5.5*2.1mm DC plug |
| Protection | 12VPCM,over-charge/discharge protection, over-heat protection |
| Recharge cycle | More than 20000 times |
| LED Indicator | Available |
| ON/OFF Switch | Available |
| Key word | 12v battery with charger |
| Standard Charge Time | Around 5H |
| Dimension | 59*70*117mm |
| Weight(approximate) | 725g |
| Operating temperature | -20 °C to 60 °C |
| Charge temperature | -0 °C to 45 °C |
| Storage temperature | -20 °C to 45 °C |
| Operating humidity | 5% to 90%,non-condensing |
Product picture:
Workshop:
Application:
Packaging & Shipping:
Matters needing attention
(1) Please check if spare parts are completed when open the package and read the operation manual carefully.
(2) Do not make the battery Short Circuit,do not over charge and discharge.
(3) Please charge the new battery to full capacity before discharge for the first use.
(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.
(5) Checking the voltage of battery, normally it is 12.8V-13.2V.
(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.
(7) Rivet or screw is used for battery connector.
(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevantconnection which fixed with screws.
(9) The charger used should be approved by our company in order to match with our lithium batteries.
(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above . It won’t be within our company warranty.
Requirement for safety assurance
For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of Lithium-ion cell advance. And consult about the high rate current, rapid charge and special application in the same way.
Safety:
Passed the below abuse and safety test-short-circuit, dropping, nail penetration, impact, crush, thermal shock, over-charge,over-discharge: no fire, no explosion with stable chemical structure.
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
500,000-800,000
Employee Number:
50~100
Ecer Certification：
Active Member
CAS Energy is aimed to secondary green energy products.Our factory is located in ShenZhen City which is the well-known battery production base in China.Products include: lithium iron phosphate battery pack, 12V series ABS lead-acid battery replacement. . We have a lot of professional managers and... CAS Energy is aimed to secondary green energy products.Our factory is located in ShenZhen City which is the well-known battery production base in China.Products include: lithium iron phosphate battery pack, 12V series ABS lead-acid battery replacement. . We have a lot of professional managers and...
Get in touch with us
Leave a Message, we will call you back quickly!