Swipeable Scratch Proof Car Wrap Flaming Gloss Red Metallic Vinyl Wrap

Product Specification

 Product Name:  Air Release Swipeable Gloss Flaming Car Wrap Film

 Product Description:
  
  Car wrap film is the medium of choice for vehicle advertising because it costs much less than a custom paint job, and it offers significantly more design and finish options than paint.

Product Specfications:

 
Product Features:

• Very high gloss semi-conformable film
• Easy apply feature helps eliminate wrinkles and bubbles during application
• Unique patented adhesive technology
• Excellent conformability around curves and recesses
• Exceptional durability and performance
• Combines a colored film and protective layer in one convenient construction with fewer seams
• Good conformability to irregular substrates

Product Application:
￭ Trucks
￭ Trailers
￭ Buse

￭ Emergency Vehicles
 
 Advantages of Applying Car Wrap Film:

• Useful on exterior and interior. When you think of car vinyl wrap, you might think of a complete exterior overhaul. But vinyl has applications inside your car as well. If you cut it to size and pick a suitable color, it can really jazz up your dashboard, accent your radio, or make your doors more stylish. Yes, vinyl wraps are functional, but they also lend themselves to artistic applications.
• Prevents damage from overheating. Provided you choose a model resistant to ultraviolet radiation or something that reflects light well, your car takes in less heat. If used on the hood, it can keep the scorching sun off of your car’s essential components.
• Customize your car’s look. A vinyl wrap is a whole lot more affordable and much more noticeable than opting for a spoiler or a new set of rims, creating lasting, impactful changes of your vehicle’s look. You can get wraps in any color, letting you completely overhaul your car’s appearance without making any mechanical modifications.
• Affordable improvement. Getting your own car vinyl wrap can save you some expensive shop time. Though the project isn’t complex, it is time-consuming, and anyone who’s been to a mechanic knows that those hours can add up. Thankfully, vinyl wraps are easy to get in place, have evolved a lot since Milton Hershey invented them in 1900.
• Protects the car’s paint. In terms of functional benefits, the wrap is literally a physical barrier that protects the paint on your car. The vinyl is relatively thin, yes, but due to the flexible nature of the polymer, it resists low-force scratches well. It keeps your paint out of the sun and helps it last longer overall.
• Safe to use on any paint. The type of adhesive that works with vinyl wraps is heat- (or pressure-) activated. It enables you to slide it into position during installation. The glue is gentle on your car’s surface, even after it dries. Vinyl wraps are easy to remove and won’t harm your car’s paint. They are, however, single-use items. Once removed, you can’t reapply it.

 FAQs:

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

• How to remove vinyl from your car?

1. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
4. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.