Electro Optical Matte Metallic White Wrap removable Full Car Wrap Roll Film

Product Specification

 Product Name: Air Release Slideable Matte Electro-Optical Metallic White Car Wrap Film

 Product Description:

Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.

Product Features:

• Combines a colored film and protective layer in one convenient construction with fewer seams
• Available in opaque and textured, special effect, and metallic options
• Excellent conformability around curves and recesses
• Exceptional durability and performance
• Even the most experienced applicators are more productive, compared to the standard permanent adhesive.
• Cost-efficient application

Product Specfications:

Product Application:

￭ Trucks

￭ Trailers

￭ Buses

 Advantages of Applying Car Wrap Film:

• Vinyl car wraps protect your OEM paint and are 100% removable.
• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Many of the styles can not be reproduced by paint.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
• You can restore the car to its original color by removing the wrap.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
• It’s difficult to tell it’s not painted.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Hides scratch, small chips, and “freshens” the look of your vehicle.

  FAQs:

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

• How to remove vinyl from your car?

1.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.