Slidable Air Release Wrap Matte Soul Red Crystal Metallic Vinyl Wrap SGS

Product Specification

 Product Name: Air Release Slideable Matte Crystal Red Metallic Car Wrap Film

 Product Description:

Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.

Product Features:

• Combines a colored film and protective layer in one convenient construction with fewer seams
• Available in opaque and textured, special effect, and metallic options
• Faster positioning and air bubble-free car wrapping film application
• Long term removability after the intended period of use
• Cost-efficient application
• Even the most experienced applicators are more productive, compared to the standard permanent adhesive

Product Specfications:

Product Application:

￭ Trucks

￭ Vehicle advertising

￭ Trailers

￭ Buses

￭ Cars & Vans

 Advantages of Applying Car Wrap Film:

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• You can restore the car to its original color by removing the wrap.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
• It’s difficult to tell it’s not painted.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Hides scratch, small chips, and “freshens” the look of your vehicle.

  FAQs:

• How to remove vinyl from your car?

1.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

• How Do You Maintain a Wrapped Car?

         The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.