Moisture Proof Electro Optic Carbon Gray Vinyl Wrap Roll Slidable Scratch

Product Specification

Moisture-Proof Electro Optic Carbon Gray Vinyl Wrap Roll Slidable Scratch Resistant

 Product Name:  Air Release Slideable Electro Optic Carbon Gray Car Wrap Film Durable

 Product Description:

• Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
• This black car wrap is made of high-quality PVC material.Waterproof, moisture-proof, durable and non-fading.Different from ordinary style,it shas a matte finish that looks more textured.
• Thick vinyl film with buuble-free air egress technology.
• Invisible Air Channels make installation quicker and easier.
• Sticks to any clean, smooth surface with no mess and no added products necessary.

Product Specfications:

Product Application:

1.  Trailers
2.  Emergency Vehicles
3.  Vehicle advertising
4.  Cars & Vans
5.  Buses

Product Features:

1. Combines a colored film and protective layer in one convenient construction with fewer seams
2. Even the most experienced applicators are more productive, compared to the standard permanent adhesive.
3. Faster positioning and air bubble-free car wrapping film application
4. Cost-efficient application
5. Available in opaque and textured, special effect, and metallic options
6. Long term removability after the intended period of use

 Advantages of Applying Car Wrap Film:

1. Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
2. Vinyl car wraps protect your OEM paint and are 100% removable.
3. It’s difficult to tell it’s not painted.
4. Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
5. Many of the styles can not be reproduced by paint.
6. You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
7. The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
8. Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
9. Hides scratch, small chips, and “freshens” the look of your vehicle.

  FAQs:

1 . How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

2 . Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

3 . How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

4 . Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

• How to remove vinyl from your car?

1. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

2.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel. 

3.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

4.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.