OCM AC Recovery Machine LCD Display Auto Flush Machine Refrigerant

Product Specification

OCM AC Recovery Machine , LCD Display Auto Flush Machine Refrigerant

Why need to flushing and cleaning AC system ?

Once an AC system has been contaminated or has suffered a failure , the most important part of the AC service to restore the cooling performance to the system = FLUSHING . WITHOUT proper flushing procedures , seizing a new or rebuilt compressor is a real possibility . The AC compressor must be lubricated at all times . The AC compressor is the only moving part in the entire system and the only reason for oil in the system . The oil is being circulated throughout the system , that means that all the components ( condenser , hoses , tubes , evaporator , drier , accumulator ) have some coating of oil internally . If any dirt , debris or contamination happened in the system all components are affected . Removing the oil ( and oil film inside the components ) will eliminate all of the contamination from the AC system . It’s the oil that attracts and holds contaminants within the system . Remove the old oil = remove the contamination . The AC system must be flushed whenever the AC compressor is being replaced/removed or whenever there is indication of contamination within the system . Make it a habit to remove and inspect the orifice tube ( if the system is so equipped ) . The orifice tube inlet filter screen will always tell a story about the condition of the auto AC system . Any debris or foreign material found on the orifice tube should cause you to look for other indications of contamination .

Why Do You Need to Flush the Air Conditioning Unit?

An A/C system flush is a necessary procedure to ensure the air conditioning system is clean and free from any contaminants. Any foreign objects in the AC system can cause blockages and prevent the compressor from operating efficiently.

Product Instruction

a . Refrigerant Recovery : Recover the refrigerant R134a from the A/C system and do refreshing before restore it into the cylinder , so it will avoid refrigerant contamination .

b . Refrigerant filling : Set the amount of refrigerant filling, add the appropriate amount to the same vehicle type refrigerant .

c . Air conditioning leak : Detection air conditioning refrigerant piping for leaks , refrigerant piping to ensure a good seal .

d .Vacuum : Vacuumize the A/C system , exhaust the moisture and air inside .

e . Fill frozen oil : Set frozen oil , frozen oil added to the air-conditioning system .

Product Specification

About us:

WONDERFU was established in 1998. And we have 20 years’ experience in manufacturing automotive garage equipments. We are professional in producing refrigerant AC service machine.

The head office of our corporation is situated in Guangzhou, Guangdong province. Due to our enormous understanding and massive knowledge of this business, We try to cater the chinese Industry with changing & ever growing demand for all types of automotice equipments like ac recovery machine,dry sanding machine,fuel injector tester, tire inflator,Brake Fluid exchanger, Transmission Fluid Exchanger, Coolant Exchanger and other equipments that are required for the development of the industry.

Our production activities are taken care of by our seasoned and qualified team of professionals.
They have rich industrial experience assisting us in improvising our activities.
Our team comprises designers, engineers, quality inspectors, administration and marketing professionals and allied staff.
We make sure to recruit the best and experienced personnel contributing to the immense success enjoyed by the company.

FAQ :

Q1. Do you make customer’s auto AC parts?
A. Yes,you can send us samples and we can develop the new models especially for you.

Q2. What is your Minimum Order Quality?
A. Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.

Q3. What about delivery time?
A. Generally, it will take 2 to 3 days after receiving your payment. The specific delivery time depends on the items and the quantity of your order.

Q4. What’s your agency distributor policy focused on auto AC parts?
A. We have some different policies according to target markets, So please send emails for detailed discussions or talk face to face.

Q5. Can you produce according to the samples?

A. Yes, we can produce by your samples or technical drawings. OEM and ODM are supported in our factory.