ACE Container & Parts Co., Limited
| Type | Tank Container, T11 |
| Length (feet) | 10ft |
| Capacity | 10000L |
| External Dimensions(l x W x H)(mm) | 2991 x 2438 x 2591mm |
| Internal Dimensions(l x W x H)(mm) | 10 CBM |
| Material | Corten-A |
| Frame Material | SPA-H,Q345D or equivalent |
| Tank Material | 316L/SAN50028-7/WNr 1.4402/1.4404 |
| Insulation | Rockwood |
| Design Temperature | -40 to +130 centigrade |
| Certificate | BV, LR |
| Approval | IMDG, CFR49, ADR/RID, AAR 600, CSC, TC, TIR, ISO UIC, US/UK DOT |
| Design Code: | ASME VIII Div. 2 |
| Delivery Time | within 30 days |
| Place of Origin | Tianjin, China |
| Brand Name | ACE |
View Detail Information
Explore similar products
316L/SAN50028-7/WNr 1.4402/1.4404 Material 25000 Liters SS316L Vessel and Shell
Stock 20 ft ISO Tank Container 26000 Liter with 4.0/6.0Mpa Pressure and 316L
UN T3 Fire Heating 20ft Bitumen ISO Tank Container with CSC Certificate and
IMDG T4 Standard Steel Material 20ft ISO Fuel Tank Container 26000L Capacity for
Product Specification
| Type | Tank Container, T11 | Length (feet) | 10ft |
| Capacity | 10000L | External Dimensions(l x W x H)(mm) | 2991 x 2438 x 2591mm |
| Internal Dimensions(l x W x H)(mm) | 10 CBM | Material | Corten-A |
| Frame Material | SPA-H,Q345D or equivalent | Tank Material | 316L/SAN50028-7/WNr 1.4402/1.4404 |
| Insulation | Rockwood | Design Temperature | -40 to +130 centigrade |
| Certificate | BV, LR | Approval | IMDG, CFR49, ADR/RID, AAR 600, CSC, TC, TIR, ISO UIC, US/UK DOT |
| Design Code: | ASME VIII Div. 2 | Delivery Time | within 30 days |
| Place of Origin | Tianjin, China | Brand Name | ACE |
T4 20ft iso tank container, Full Frame Potable Tank Container, which is widely used to transport kinds of liquid chemical medium.The shell is 316 stainless steel, the frame is made of strong steel Corten A or equal material, which are testing by LR.
Our T11 10ft iso tank container is designed as perASME standard, and meeting IMO/IMDG, ISO, UN, CSC, TIR, UIC, TC, ADR/RID L4BN.The Capacity is 10000L.
Specifications - T11 10 iso tank container | ||||
Frame Dimensions (L x W x H) | 2991 x 2438 x 2591 mm | |||
Nominal Capacity | 10000 litre (±0.75%) | |||
Maximum Gross Mass | 16000 kgs | |||
Tare Mass | 2300 kg (± 3%) | |||
Design Temperature (Frame & Tank) | -40 to +130 °C | |||
Pressure | Working | 4.0 bar | ||
Test | 6.0 bar | |||
Material | Tank (Shell & Ends) | SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%) | ||
Frame | SPA-H or equivalent | |||
Insulation | Shell | Not fitted | ||
Ends | Not fitted | |||
Steam Heating | Not fitted | |||
Manhole | 500mm low profile, 8 point fixing with Super Tanktyt Lid seal. | |||
Safety Relief Assembly | 1 x 2.5” BSP pressure relief valve without flameproof gauze. | |||
Air Inlet A | DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad. | |||
Top Discharge | 1 x 3” weld in pad (drilled with 6 x M12 PCD 168mm) completes with blank flange. A siphon tube guide plate is welded on bottom floor of tank. | |||
Bottom Discharge | 1 x 3” 45° high-lift foot valve with opening handle and 3” clamped butterfly valve terminating with 3” BSP stainless steel spigot and dust cap with retaining chain. | |||
Thermometer | 1 off, Dual scale thermometer, -40° C to 160° C, fitted on rear end to lower right side | |||
Document holder | A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | |||
Calibration | A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted. | |||
Design Code | ASME VIII DIV. 1 | |||
Approval | IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3 | |||
1. Are your T11 10ft ISO tank containers brand new? Yes, all the containers we provide are brand new. In fact, we begin manufacturing the containers only after receiving order confirmation. 2. Do your T11 10ft ISO tank containers meet international requirements? Yes, all of our tank containers are approved by BV, LR, or CCS and comply with the following international standards:
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2011
Total Annual:
10000000-50000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
ACE Container & Parts Co., Ltd, formerly known as Tianjin ACE container yard, was established in 2001. Initially, our primary focus was on providing temporary stockpiling services for cargo and bulk items that were either soon to be exported or had just been unloaded from ships. In 2002, we expa... ACE Container & Parts Co., Ltd, formerly known as Tianjin ACE container yard, was established in 2001. Initially, our primary focus was on providing temporary stockpiling services for cargo and bulk items that were either soon to be exported or had just been unloaded from ships. In 2002, we expa...
Get in touch with us
Leave a Message, we will call you back quickly!