Wuxi Jinlai Mechanical Processing Co., Ltd.
| Payment Terms | T/T, Western Union, L/C |
| Supply Ability | 10000 tons per month |
| Delivery Time | within 15 days after received the deposit |
| Packaging Details | atandard seaport packing or as customer's requirement |
| Technique | Cold Rolled Hot Rolled |
| Technic | hot rolled |
| Type | Carbon steel bar |
| Length | 1-12m |
| Shape | Round |
| Surface treatment | As custom request |
| Port | Shanghai |
| Application | Structual steel bar |
| Brand Name | JIN LAI |
| Model Number | 1020 |
| Certification | ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Non Magnetic Steel Rod Bar , Galvanized Steel Round Bar Simple Chemistry
Building Automobile Carbon Steel Round Bar Metal Economical A36 Structural
Impact Resistant Alloy Round Bar Brinell Hardness Range 179 – 280 Induction
High Stress Annealed Alloy Steel Round Bar AISI 4140 Heavy Duty With Chromium
Product Specification
| Payment Terms | T/T, Western Union, L/C | Supply Ability | 10000 tons per month |
| Delivery Time | within 15 days after received the deposit | Packaging Details | atandard seaport packing or as customer's requirement |
| Technique | Cold Rolled Hot Rolled | Technic | hot rolled |
| Type | Carbon steel bar | Length | 1-12m |
| Shape | Round | Surface treatment | As custom request |
| Port | Shanghai | Application | Structual steel bar |
| Brand Name | JIN LAI | Model Number | 1020 |
| Certification | ISO | Place of Origin | CHINA |
| High Light | mild steel round bar ，steel round bar stock | ||
Carbon steel is available as bright drawn key steel in flat and square sections. With medium tensile strength key steel is used widely in general engineering for components such as plain, gibhead, taper and parallel keys. Key steel is produced to the required tolerances as specified in British Standard BS46 and BS4235.Carbon spring steel specifications EN42, CS70, CS80, CS95 and CS100 are available as hardened and tempered spring steel strip, annealed spring steel strip, spring steel plate and spring steel sheet. EN43 spring steel is available in bar and plate. The grades commonly conform to BS970, BS1449, BS EN10083-1, BS EN10083-2, BS EN 10277 and BS EN 10278 standards.X120Mn12 1.3401 is a manganese steel with 1% carbon steel and an 11% to 14% manganese content supplied in plate. Offering excellent work hardening properties high manganese steel can be supplied in full plates or cut to your requirements.1020 belongs to high quality low carbon steel, cold extrusion, carburizing and hardening steel. The low steel strength, toughness, plasticity and weldability are good. Tensile strength of 253-500 mpa, the elongation is 24% or higher.
Round bar steel: 10#,20#,belongs to the low carbon steel grades, good plasticity, easy drawing, extrusion, stamping, forging and welding, the 20# most widely used steel of.45# is medium carbon steel, after quenching and tempering, excellent mechanical properties can be obtained, is used as an important axis, above the fasteners.60# belongs to high carbon steel production, spring and wear parts of.20CrMnTi is important for carbon steel, gear and other important.27SiMn high strength steel welding is easy, the need for the very important place is 42CrMo.35CrMo welding, high strength steel, for very important parts, such as engine connecting rod screw, the cylinder head screws. Heavy vehicle tires screw.
| Standards | Designation |
|---|---|
| ASTM | A510 |
| Length | Diameter |
|---|---|
| 1000-12000mm | 5mm-1200mm |
| Type | Certification |
|---|---|
| 1020 Carbon Steel Round Bar | ISO 9001:2008 |
Grade |
C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
| max | max | max | max. | max. | max | max | max | max | |
| 1020 | 0.37-0.44 | 0.17-0.37 | 0.50-0.80 | 0.025 | 0.025 | 0.60-0.90 | 1.25-1.65 | 0.25 |
0.15-0.25
|
| Physical Properties | Metric | Imperial |
| Density | 7.85 g/cm3 | 0.284 lb/in3 |
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation in 100-150 mm(%) | Reduction in Area | Hardness |
| 1020 | ≥380 | ≥210 | ≥25 | ≥50 | ≤111HB |
| Chemical Composition | Application | |||||||||
| C | Si | Mn | P≤ | S≤ | CU≤ | Cr | Ni | Mo | V | |
| 0.43-0.49 | 0.15-0.35 | 0.60-0.90 | 0.03 | 0.035 |
machine structural use, hand tools |
|||||
| 0.53-0.59 | 0.17-0.37 | 0.50-0.80 | 0.03 | 0.03 | 0.2 | 0.25 | 0.3 | hand tools | ||
| 0.57-0.63 | 0.17-0.37 | 0.50-0.80 | 0.03 | 0.03 | 0.2 | 0.25 | 0.3 | hand tools | ||
| 0.13-0.18 | 0.15-0.35 | 0.60-0.85 | 0.03 | 0.03 | 0.9-1.2 | 0.15-0.30 |
shaft, piston, car & motor parts for carburizing harden |
|||
| 0.18-0.23 | 0.15-0.35 | 0.60-0.85 | 0.03 | 0.03 | 0.9-1.2 | 0.15-0.30 | ||||
| 0.32-0.40 | 0.17-0.37 | 0.40-0.70 | 0.02 | 0.02 | 0.2 | 0.2 | 0.8-1.1 | 0.15-0.25 |
shaft, gear, tie rod and gears with high strength and large section |
|
| 0.38-0.45 | 0.17-0.37 | 0.50-0.80 | 0.02 | 0.02 | 0.2 | 0.2 | 0.9-1.2 | 0.15-0.25 | ||
| 0.37-0.44 | 0.17-0.37 | 0.50-0.80 | 0.02 | 0.02 | 0.2 | 0.8-1.1 |
parts of medium speed and load |
|||
| 0.37-0.44 | 0.17-0.37 |
0.50 -0.80 |
0.02 | 0.02 | 0.2 | 0.8-1.1 | 0.10-0.20 |
parts with variable and high load |
||
| 0.38-0.43 | 0.17-0.30 | 0.70-0.80 | 0.02 | 0.02 | 0.2 | 0.5-0.6 | 0.25 | 0.10-0.20 | hardware | |
| 0.51-0.59 | 0.15-0.35 | 0.70-0.90 | 0.035 | 0.04 | 0.7-0.9 |
hand tools, spring |
||||
| 0.42-0.47 | 0.15-0.35 | 0.60-0.90 | 0.03 | 0.03 | 0.5-0.7 | 0.10-0.15 |
hand tools, hook |
|||
| 0.47-0.54 | 0.17-0.37 | 0.50-0.80 | 0.02 | 0.02 | 0.2 | 0.8-1.1 | 0.10-0.20 |
hand tools, spring |
||
| 0.56-0.64 | 0.15-0.35 | 0.75-1.00 | 0.035 | 0.04 | 0.4-0.6 | 0.4-0.7 | 0.15-0.25 | 0.15-0.25 | hand tools | |
| 0.58-0.63 | 0.17-0.37 | 0.55-0.80 | 0.025 | 0.025 | 0.2 | 0.25 | 0.10-0.20 | hand tools | ||
| 0.58-0.65 | 0.17-0.37 | 0.50-0.80 | 0.025 | 0.025 | 0.2 | 0.8-1.1 | 0.3 | 0.10-0.20 | hand tools | |
| 0.56-0.64 | 0.75-1.00 | 0.15-0.35 | 0.035 | 0.04 | 0.4-0.6 | 0.4-0.7 | 0.15-0.25 | 0.15-0.25 |
hand and air bits |
|
| 0.65-0.73 | 1.00-1.25 | 0.45-0.60 | 0.025 | 0.025 | 0.2-0.4 | 0.1-0.3 | 0.40-0.50 | 0.15-0.25 |
hand and air bits |
|
| 0.52-0.60 | 0.17-0.37 | 0.20-0.40 | 0.02 | 0.02 | 0.2-0.4 |
mechanical parts, hardware |
||||
| 0.18-0.23 | 0.15-0.35 | 0.70-0.90 | 0.035 | 0.04 | 0.4-0.6 | 0.4-0.7 | 0.15-0.25 |
shaft,piston, car&motor parts |
||
| 0.27-0.33 | ≤0.10 | 0.70-1.10 | 0.03 | 0.03 | 0.3-0.5 | B≥0.0005 | 0.10-0.15 |
hand tools,car&motor parts,screws |
||
| hand tools | ||||||||||
| 0.39-0.42 | 0.15-0.35 | 0.80-0.95 | 0.02 | 0.02 | 0.2 | 0.8-1.1 | 0.18-0.25 |
high strength screw and bolt |
||
| 0.19-0.24 | 0.30 | 1.30-1.60 | 0.035 | 0.035 |
B 0.0005- 0.0035 |
Ti 0.04-0.10 |
high strength screw and bolt |
|||
| 0.17-0.23 | 0.17-0.37 | 0.80-1.10 | 0.035 | 0.035 | 1.0-1.3 | Ti 0.04-0.10 | driving gear | |||
| 0.24-0.32 | 0.17-0.37 | 0.80-1.10 | 0.02 | 0.02 | 0.2 | Ti 0.04-0.10 |
locking and fixing part |
|||
Company Details
Business Type:
Manufacturer,Agent,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
10000000-20000000
Employee Number:
100~200
Ecer Certification：
Active Member
Wuxi Jinlai Machinery Processing co. LTD has been engaged in steel industry for more than 12 years. We are famous in our country with good reputation, high-quality products, solid strength and lower price. Our products include carbon steel, wear resistant plate , galvanized steel p... Wuxi Jinlai Machinery Processing co. LTD has been engaged in steel industry for more than 12 years. We are famous in our country with good reputation, high-quality products, solid strength and lower price. Our products include carbon steel, wear resistant plate , galvanized steel p...
Get in touch with us
Leave a Message, we will call you back quickly!