3 Inch 6 Inch Red Automotive Buffing Pads For Car Paints Cars

Product Specification

Black Finishing Sponge Pads In 3 Inch 4 Inch 5 Inch 6 Inch For Car Paints Cars

BT-6024 Sponge Polishing Pad black in fine grade
BT-6025 Sponge Polishing Pad orange in medium duty
BT-6026 Sponge Polishing Pad yellow in heavy grade duty
The size and thickness are the same. just in a different grade.
for 6 Inch 150mm Backing Plate Compound , Cutting Polishing Pad Kit
For Car Buffer Polisher Compounding , Polishing and Waxing

Car Polishing pads: Most Important Features to Evaluate
Size of Pad: The pad's diameter typically ranges from 3 inches to 8 inches, contingent upon the surface that requires polishing.
Pad Density: The aggressiveness of the pad is influenced by the foam's rigidity. Lower density (soft) pads are intended for completing, while higher density (firm) pads are more aggressive.

Attachment Method: The majority of pads are fastened to polishers using hook-and-loop (Velcro) support, which facilitates their replacement.
Without a doubt! The following is a comprehensive summary of the specifications for cutting pads, polishing pads, and finishing pads. It is important to note that the specifications of these products may differ depending on the brand and specific product line. However, they typically include information regarding the size of the pad, the density of the foam, and the intended application.
er based on the brand and product line, but they usually include information about pad size, foam density, and intended application.

Cutting Pad Specifications
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam Density: Firm (high density)

- PPI (Pores Per Inch): 50-80 PPI (lower PPI for more aggressive trimming)
- Composition: Microfiber or coarse foam, occasionally wool
- Thickness: 1 to 1.5 inches
- Purpose: The removal of severe defects, including deep scratches, oxidation, and spiral marks.
- Color: Cutting pads are typically painted in darker hues, such as yellow, orange, or blue.
- Surface Type: Flat, open-cell structure for enhanced heat dissipation and ventilation
- Cutting Ability: High cutting ability, with the potential to produce micro-marring or haze
Polishing pad specifications
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density: Medium density
- PPI (Pores Per Inch): 60-80 PPI (moderate PPI for balanced trimming and polishing)
- Composition: Foam that is medium to thin in texture
- Thickness: 1 to 1.5 inches
- Purpose: Surface refinement following cutting, minor defect removal
- Color: Typically characterized by paler hues (e.g., white, green, or light blue)
- Surface Type: A flat or slightly concave surface to facilitate the application of polish
- Cutting Ability: Moderate cutting ability, intended to improve luster and eliminate fine scratches
Specifications for Finishing Pads
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam Density: Soft (low density)
- Pores Per Inch (PPI): 70-100 (higher PPI for seamless application and minimal cutting)
- Composition: Foam that is exceedingly flexible
- Thickness: 0.75 to 1.25 inches
- Purpose: Final polish, application of glazes, sealants, or oils
- Color: Frequently in extremely pale hues (e.g., gold, scarlet, or black)
- Surface Type: Waffle or flat surface to mitigate the danger of swirl marks
- Cutting Capacity: Low to non-abrasive, engineered to optimize luster without removing material.