Industrial Stainless Steel Water Softener System For Commercial Water Heaters

What is a water softener?
A water softener is a whole-house filtration system that removes hardness-causing calcium and magnesium minerals from your water through a process called ion exchange. A water softener addresses one of the most prevalent and devastating water problems: hard water. Hard water wreaks havoc on the modern home. Scale builds up in your pipes, clogging them and decreasing water pressure. Scale dramatically shortens the lifespan of appliances like dishwashers, coffee makers and ice machines. Hard water destroys hot water appliances. The higher the temperature of the water, the more calcium and magnesium will solidify and harden into solid deposits inside your hot water heater. If you live in hard water territory, it can sound like your water heater is popping popcorn. This is because scale has attached itself to the heating element. As the temperature of the heater rises and the tank expands, the calcified rock deposits crusted on the heating elements start cracking and stretching. Hard water-induced scale is the culprit of that popcorn popping sound.

Without a water softener, laundry demands extra detergent to prevent it from looking dingy. Dishes will come out of your dishwasher streaked and stained. Filmy scum builds up on your shower curtains and your soap and shampoo will not lather. Bathing in hard water leaves your skin itchy and dry and your hair lifeless and sticky. The sheer amount of time, energy, and money required to clean up the detrimental side effects of hard water is dizzying. A whole house water softener is the solution to the scourge of water hardness.

Product Feature:

• No electricity is required.
• Easy installation, maintenance-free.
• Unlimited household water pressure.
• Safe and environmentally friendly, with no chemical substances.
• Suitable for long-term use.
• Compatible with any water heater.
• No need to descale the tank heater.

Central Water Softener

The chip is made of SAAS material with a proprietary invention patent and is in a sheet shape. It is designed in the shape of a turbine with two opposite nozzle directions inside and outside. This design ensures that the material is not wasted and provides sufficient flow area for direct water flow impact on the chip surface while passing through it. This stimulation triggers the chip to release microcurrents, achieving scale inhibition. The inner and outer double-circle reverse nozzles create greater swirl disturbance in the water flow, enhancing the scale inhibition of the subsequent chip.

Is soft water safe to drink?

Yes, soft water is safe to drink. During the ion exchange process, the resin beads do release sodium into the water while removing hardness minerals. However, the amount of sodium added to softened water is not considered unhealthy and is significantly lower than what is commonly believed. For example, if you have moderately hard water with a hardness level of five grains per gallon (about 86ppm), it only adds around 37 milligrams of sodium per quart of water. This is less than 2% of the recommended daily sodium intake. To put it into perspective, a slice of white bread contains approximately 170 milligrams of sodium, and a slice of pizza contains about 640 milligrams. Therefore, the amount of sodium added by water softeners is negligible.

The amount of sodium added by a water softener is directly proportional to the amount of hardness minerals being removed. For every milligram of hardness in the water, the softener releases two milligrams of sodium. This only becomes a concern if you live in an area with extremely hard water. If your water has a hardness level of over 400 ppm, it is advisable to install a reverse osmosis system to treat the water you drink and cook with. Reverse osmosis systems push water through a semipermeable membrane capable of removing almost all dissolved solids and salts from the water. If your doctor has recommended reducing sodium intake due to blood pressure or kidney problems, it is also advisable to install a reverse osmosis system after your water softener.



 

FAQ:

• Q1:Are you a manufacturer?
• A. Yes. We are the top manufacturer of water filters in China and the industry leader and standard drafting unit. We have already developed over five generations of different types of washing modes for water filters.
• Q2.Can we use our logo/brand?
• A. yes, we already do OEM and ODM with famous brands like Honeywell, Ispring, and many other first-tier brands in the world.
• Q3. Can you offer a sample to check the quality?
• A: Yes. We offer agent prices for samples.
• Q4.What’s the order delivery time?
• A: Our production capacity is 100000 units per month, and the Lead time is according to the order quantity, order models, and packing. Generally, it takes about 7-35 days.
• Q5.Why should I choose BRISKSPRING?
• A: 1)We have full production chains, from industrial design, mold, plastic injection, and copper parts, Every part of your filters and the copper parts are made by ourselves. The product quality and cost are under control.
• 2) Most filters have international certifications such as NSF, SGS, and RoHS.