Semi Automatic SS316 CIP Cleaning System For Beer Brewing Process CE Certificati

Product Specification

Automatic Or Semi-automatic SS CIP System Auxiliary Brewing Equipments For Beer Brewing Processing

CIP Product description

Clean-in-Place (CIP) is a method of cleaning the interior surfaces of pipes, vessels, process equipment, without disassembly. The benefit to industries that use CIP is that the cleaning is faster, less labor-intensive and more repeatable, and poses less of a chemical exposure risk to people. Manual CIP skids have a balance tank, centrifugal pump, and connection to the system being cleaned. Fixed CIP stations include fully automated systems with PLC, multiple balance tanks, sensors, valves, heat exchangers, data acquisition and Spray balls. The Steam-In-Place (SIP) System is responsible for repeatedly steaming areas of product contact to reduce the bio-burden on the system. The steam system must be able to measure and control steam temperature, pressure, and/or flow to ensure adequate steaming.

Applications

Fermenters, Vessels, Storage Tanks

Bioreactors, Mixers, Silos

Buffer preparation hold systems

Formulation systems

Closed loop Equipment & piping systems, viz Process Piping, Heat exchangers, Boilers, Pasteurizers, etc

CIP Design Concept 

Each equipment is designed (in single or multi-tank configuration) to achieve the most effective and easily available cleaning systems, starting from:

Type, size & location of equipment to be washed

Required type of water and chemical agent

Soiling levels of the product to be removed

CIP Supply & Return pump requirements

Cleaning Spray Balls/nozzles type

Washing sequence, automation level

Heating arrangements

CIP Technical Parameters 

In CIP/SIP automatic stations, CIP critical parameters integrated are:

Contact time of solution

CIP Supply & Return temperature

Chemical conductivity for wash solutions

CIP solution flow rate & pressure

Tanks levels

Above parameters can be constantly monitored by the PLC and managed with cost-savings criteria. CIP/SIP System can be customized with different washing cycle programs.

CIP Specifications --consists of the following elements:

1. Two SS 316 tanks, one jacketed (with Rockwool insulation) or 1000L for the preparation of caustic solution with conical bottom & another tank of 1000L non-jacketed for preparation of the Acid solution. Both fitted with fixed spray balls for self-cleaning of tanks.

2.  One SS 304 tank, jacketed 1500L for recovered water with a conical bottom. Fitted with static spray ball.

3. Heating carried out by a Tubular steam heat exchanger, with a Pneumatic steam control valve, drains & Steam condensate valve.

4. Air operated double diagram pumps (MOC-PP/PTFE) for concentrate chemical dosing.

5. 5.5 kW, SS 316L with Mech. Seal-C/SiC & EPDM seals, CIP Supply pump with VFD & 5.5 kW self-priming pump for CIP return. Both pumps fitted with SS 304 Shrouds.

6. Pneumatic butterfly valves, SS 316L with actuators w/o feedback

7. SS 304 Skid with adjustable level pads.

8. Level control in the tanks.

9. A flow switch, Temperature & Conductivity controller, Inline Strainer (0.5 mm screen) & Sampling valve mounted in the CIP return line.

10.  Flow & Pressure transmitter, Temperature controller, Heat exchanger, Pressure gauge mounted on the CIP supply line.

11.  SS 304 Control cabinet with 10" touch screen Allen Bradley HMI & PLC control system.

12.  5 program preparation: Short tank cleaning, short line cleaning, tank long cleaning and long line cleaning, Manual valve activation. Plant state displaying, Change of parameters.

13. Pickled and passivated internal weld joints. Surface finish – Mirror up to 240 grit/ Matt up to 180 grit as per requirements.

CIP Display