Stable Portable Electric Pressure Test Pump With Water Tank

Product Specification

Portable stable electric pressure test pump with water tank for pipeline construction, pressure vessel test

Description

1. High voltage output is designed according to high efficiency and low loss.
2. Differential operation makes the output fluctuation very small and the output pressure balanced. Simple and firm structure makes disassemble and maintenance simple and easy.
3. Small and light structure, easy to carry.
4. Universal spray gun can make cleaning easy and can be cleaned almost everywhere.
Uses: air conditioning cleaning, wall cleaning, vehicle engine cleaning, agricultural tools and machinery cleaning, spraying pesticides and pestides, printing machinery cleaning, pipeline cleaning and dredging, food processing equipment and kitchen cleaning.

Specification

Photo	Model	Pressure	Voltage	Power	Flow volume	G.W/N.W	Meas	Note
	DSY-60	0-6.0MPA 0-60BAR	110/220V	250W	180L/H	13.5/12KGS	40*30*29cm	Plasticbox
	DSY-60C	0-6.0MPA 0-60BAR	110/220V	250W	180L/H	13.5/12KGS	40*30*29cm	Plasticbox
	DSY-60A	0-6.0MPA 0-60BAR	110/220V	400W	480L/H	17/15KGS	40*30*29cm	Plasticbox
	DSY-60B	0-6.0MPA 0-60BAR	110/220V	700W	480L/H	21/19KGS	40*30*29cm	Plasticbox
	DSY-100	0-10MPA 0-100BAR	110/220V	380W	180L/H	14/12.5KGS	40*30*29cm	Plasticbox

You see our price is base on above red one, for other size, if you want know price, pls feel free to contact us, tks.

Advantages:

1.For quick and exact compression testing
2.For testing of leaks in installations, especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe applications

Packing:
We put pp fittings into plastic box, then put in carton.

Shipping:
For sample orders, we can ship it by international express, such as DHL, FEDEX, TNT and China EMS.
For bulk orders, we support air cargo and sea shipping, our factory are near from Shanghai port and Ningbo port, and we can transfer goods to port within 24 hours.

Instruction for use of Electrical Pressure test pump

1. Check that the gasket and the joint are well matched, and connect the water inlet pipe correctly;
2. The fire wire and ground wire must be correctly connected before use, and must not be wrongly connected! The power cord should be connected to a socket with leakage protection.
3. Loosen the pressure regulating knob first, do not start the motor with load, so as not to damage the motor
4. Check the filter regularly to avoid clogging
5. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
6. Prevent air from entering the water pump.
7. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same time, turn on the power and add oil at the water inlet to run for half a minute.
8. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
9. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
10. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
11. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.

Be sure to loosen the red pressure regulating valve before turning it on! so as not to explode the pressure gauge

Our service:

What are the guarantees I can get from doing business with you?

We’re honest businessmen, working with us, your money in safe and your business in safe.
We are willing to provide guarantees throughout the transaction.
1. Your business relationship with us will be confidential to any third party.
2. We can sign confidentiality agreements for your customized products.
3. If you have a relationship with us earlier, and tell us your direct competitors, you will get a lower offer than their.
4.If the main material of the product is not in line with the order, we accept 100% refund.

There are too many similar styles, how do I choose?
Just let us know what specific requirements you have, such as the usage scenario of product, external feature, finish or color, your budget price range, etc.
We will recommend the suitable styles for you in 24 hours.

Why are the prices of the same shape products very different?
Many factors affect the price, like the production process, the materials, the parts used to meet different plumbing code, the packaging materials, the price fluctuation of raw materials, etc.We are honest sellers, we promise you will get what you pay for.
We can produce the right products to meet the standard of your sales market, and willing to provide FREE consulting services for our customers.

Can you produce customized products?
Sure, we can provide a complete set of customization solutions for You as below:
1. Laser print your LOGO on the product upon your permission.
2. Customize the packaging based on your requirements.
3. Based on existing parts, we can recommend new styles for you.
4. Endogenous output samples in 20 working days upon a piece of engineering design drawings.Provide professional pictures,professional design box and label
5. Support custom design