Zhangjiagang Baisu Machinery Manufacture Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Delivery Time | 75 Days |
| Packaging Details | Covered with water-proof film, fastened with special container loop and hooks. |
| Supply Ability | 200 Sets / Year |
| Machine Type | Plastic Blowing Machine |
| Product Range | Table Board, Bed Board, Barrier, Floater |
| Max Volume | 200 L |
| Material | HDPE |
| Capacity | 25 Pcs/hour |
| Voltage Range | 220V/380V/415V/440V |
| Power Avg. | 62KW |
| Guarantee | 1 Year |
| Brand Name | BAISU / SUNRAY |
| Model Number | 200L EBM SRB100N |
| Certification | CE / ISO9001 |
| Place of Origin | ZHANGJIAGANG, JIANGSU |
View Detail Information
Explore similar products
SIEMENS Motor Driven Plastic Bottle Blowing Machine 1 Year Guarantee SRB100
Spray Bottle Automatic Extrusion Blow Molding Machine Reasonable Runner Design
Sport Water Bottle Plastic Blow Moulding Machine High Production SRB50-2
Small Plastic Toy Making Machine , Horizontal Automatic Blowing Machine SRB65-2
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Delivery Time | 75 Days |
| Packaging Details | Covered with water-proof film, fastened with special container loop and hooks. | Supply Ability | 200 Sets / Year |
| Machine Type | Plastic Blowing Machine | Product Range | Table Board, Bed Board, Barrier, Floater |
| Max Volume | 200 L | Material | HDPE |
| Capacity | 25 Pcs/hour | Voltage Range | 220V/380V/415V/440V |
| Power Avg. | 62KW | Guarantee | 1 Year |
| Brand Name | BAISU / SUNRAY | Model Number | 200L EBM SRB100N |
| Certification | CE / ISO9001 | Place of Origin | ZHANGJIAGANG, JIANGSU |
| High Light | plastic blowing machine ，plastic products making machine | ||
Plastic Table And Plastic Chair Making Machine 20 - 25BPH Capacity SRB100N, Folding Table Plastic Blow Moulding Machine, Children Table Plastic Blowing Machine
QUICK VIEWS
|
1. SRB100N is the table board specially extrusion blow moulding machine for 1.6m table as maximum.
2. Its output for 1.52m table board is 27 Pcs/hour, the output for 1.2m table board is 30 Pcs/hour.
3. Besides table boards, it's also used for children collection shelves, small barrier and indoor toys.
|
MACHINE ADVANTAGES
|
1. Reasonable structure design and solid frame manufacturing to insure running stability.
2. Machine total control system with convenient operation page design suitable for remote technical support.
3. Energy saving, mature hydraulic and electric design, low problem rate to reduce your production cost.
|
TECHNICAL PARAMETERS
| Machine Model | Fixed Clamping Accumulating Head |
| Max Product Volume | 200 L |
| Machine Weight | 20.5 Tons |
| Machine Size | 6.8*4.3*6.0 m |
| Screw Diameter | 100 mm |
| Plasticizing Capacity | 300 Kg/hour for HDPE & C.C. |
| Clamping Force | 800 KN |
| Platen Size | 1260*1400 mm |
| Platen Opening Stroke | 600-1600 mm |
| Max Mould Size | 1050*1800 mm |
| Accumulating Volume | 20 L |
| Max Ejection Weight | 15 Kg |
| Max Product Weight | 8 Kg |
| Max Die Diameter | 500 mm |
| Total Power | 173.25 KW |
| Average Energy Consumption | 65 KW |
Click Picture Above to see Table Board Making Video
PRODUCTION ARRANGEMENT
|
1. Machine Size: 6.8x4.3x6.0 m
2. Production Area: 12.5x7.5 m
3. Minimum Workshop Height: 7 m
4. Air Supply Requirement: 1.6m3/min, 0.8Mpa
5. Water Supply Requirement: 20 Tons
6. Machine Power Consumption: 65 KW
7. Production Line Power Consumption: 110 KW
8. Whole Line Electricity Arrangement: 800 Amps
9. Minimum Workers Number: 3 Workers
|
Extrusion System
The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.
Clamping Unit
Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers. Our nether bent arm central clamping structure insures the clamping force bearing to mould in balance, easy for scraps auto-deflashing, also good for mould's lifespan.
Electric Control
The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.
Hydraulic System
The hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on. Our hydraulic system has been updated with proportion valve and mechanical shuttle valve for action stability and precision. It insures the oil pressure output fast but smooth, action performance is quick but with less impact.
Water & Air Supply
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.4~0.6 Mpa, air consumption is 0.6~0.8 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 2500L/hour.
Automatic Production
our machine supports auto-deflashing control system and pneumatic hardware, the scraps can be on-line removed automatically through auto-deflashing mould. Scraps fall down and slide outside of machine through a slide channel. The finished products are pushed out from another side together with platen carriage down action with the guidance of bottle collective shelves. The conveyer system can be equipped to take scraps into crusher, and convey the finished products to leakage tester or packing table. During the producing period, the machine can work automatically without the worker's help.
Working Flow Arrangement
The whole producing line totally need 2 workers. Worker No.1 takes charge of material mixing and feeding, he collects the crushed scraps into color mixer, operate the material mixing of new material, crushed material and color master batch. After mixing he carries material into material source tank, the auto-loader will feed material automatically. The other worker takes charge of bottle packing, and take the packaged bottles into storage area.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2012
Total Annual:
4.5 Million-5.0 Million
Employee Number:
11~50
Ecer Certification：
Active Member
ZHANGJIAGANG BAISU MACHINERY MANUFACTURE CO., LTD is a professional manufacturer of Extrusion Blow Molding Machines, owning more than 14 years working experience in EBM machines' design, manufacturing, overhauling, service and project solutions. Our product line c... ZHANGJIAGANG BAISU MACHINERY MANUFACTURE CO., LTD is a professional manufacturer of Extrusion Blow Molding Machines, owning more than 14 years working experience in EBM machines' design, manufacturing, overhauling, service and project solutions. Our product line c...
Get in touch with us
Leave a Message, we will call you back quickly!