Zhangjiagang Baisu Machinery Manufacture Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 500 Sets / Year |
| Delivery Time | 60 Days |
| Packaging Details | Covered with water-proof film, fastened with special container loop and hooks. |
| Machine Type | Bottle Blow Molding Machine |
| Product Range | Container, Jerry Can, Tank, Bottles |
| Max Volume | 12L |
| Material | LDPE, HDPE, PP |
| Capacity | 80~100 Pcs/hour |
| Clamping Force | 68 KN |
| Power | 33.5 KW |
| Guarantee | 1 Year |
| Brand Name | BAISU / SUNRAY |
| Model Number | SRB70S-1 |
| Certification | CE / ISO9001 |
| Place of Origin | ZHANGJIAGANG, JIANGSU |
View Detail Information
Explore similar products
High Power 250ml Plastic Small PE Bottle Blow Molding Machine For Medicine
5L HDPE Plastic Bottle Making Machine Extrusion Blow Moulding Machine - SRB70D-1
Liquid PE Soap Bottle Blow Molding Machine 26.5 KW Energy Consumption SRB65-1
1000ml Plastic HDPE Bottle Blow Molding Machine Double Station Three Head EBM
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 500 Sets / Year |
| Delivery Time | 60 Days | Packaging Details | Covered with water-proof film, fastened with special container loop and hooks. |
| Machine Type | Bottle Blow Molding Machine | Product Range | Container, Jerry Can, Tank, Bottles |
| Max Volume | 12L | Material | LDPE, HDPE, PP |
| Capacity | 80~100 Pcs/hour | Clamping Force | 68 KN |
| Power | 33.5 KW | Guarantee | 1 Year |
| Brand Name | BAISU / SUNRAY | Model Number | SRB70S-1 |
| Certification | CE / ISO9001 | Place of Origin | ZHANGJIAGANG, JIANGSU |
| High Light | plastic bottle making machine ，plastic bottle production machine | ||
Various Shape Bottle HDPE Blow Molding Machine Single Station EBM Machinery SRB70S-1 , 10 Liters Plastic Bottle Making Machine , 5L 10L HDPE Plastic Jerry Can Blowing Molding Machine
QUICK VIEW
|
1. SRB70S-1 is single station single head 12L automatic bottle blow molding machine specially for 5-10L.
2. Machine total control system with convenient operation page design suitable for remote technical support.
3. Stable performance, mature hydraulic and electric design, low problem rate to reduce production cost.
4. The output for 10L outer handle bottle is 90-95 Pcs/hour, for 10L stackable jerry can is 75 Pcs/hour.
|
TECHNICAL PARAMETERS
| Machine Model | 10L Bottle Blow Molding Machine |
| Max Product Volume | 12 L |
| Machine Weight | 7.2 Tons |
| Machine Size | 4.4 x 2.1 x 2.55 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 85 KG |
| Clamping Force | 110 KN |
| Platen Size | 420 x 500 mm |
| Platen Opening Stroke | 250~650 mm |
| Max Mould Size | 450 x 480 mm |
| Head Mode | Continuous extrusion single head |
| Parison Cutting Type | Hot Cutting |
| Head Heating Power | 7 KW |
| Max Die Diameter | 180 mm |
| Total Power | 61.3 KW |
| Average Energy Consumption | 33.5 KW |
PRODUCTION ARRANGEMENT
|
1. Machine Foundation Size: 4.0 x 2.0 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 0.8m3/min, 0.8Mpa
5. Water Supply Requirement: 4 Tons
6. Machine Power Consumption: 27.5 KW
7. Production Line Power Consumption: 48.5 KW
8. Whole Line Electricity Arrangement: 125 Amps
9. Minimum Workers Number: 1~2 Workers
|
Extrusion System
The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.
Clamping Unit
Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers. Our nether bent arm central clamping structure insures the clamping force bearing to mould in balance, easy for scraps auto-deflashing, also good for mould's lifespan.
Electric Control
The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.
Hydraulic System
The hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on. Our hydraulic system has been updated with proportion valve and mechanical shuttle valve for action stability and precision. It insures the oil pressure output fast but smooth, action performance is quick but with less impact.
Water & Air Supply
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.4~0.6 Mpa, air consumption is 0.6~0.8 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 2500L/hour.
Automatic Production
our machine supports auto-deflashing control system and pneumatic hardware, the scraps can be on-line removed automatically through auto-deflashing mould. Scraps fall down and slide outside of machine through a slide channel. The finished products are pushed out from another side together with platen carriage down action with the guidance of bottle collective shelves. The conveyer system can be equipped to take scraps into crusher, and convey the finished products to leakage tester or packing table. During the producing period, the machine can work automatically without the worker's help.
Working Flow Arrangement
The whole producing line totally need 2 workers. Worker No.1 takes charge of material mixing and feeding, he collects the crushed scraps into color mixer, operate the material mixing of new material, crushed material and color master batch. After mixing he carries material into material source tank, the auto-loader will feed material automatically. The other worker takes charge of bottle packing, and take the packaged bottles into storage area.
PURCHASE & SERVICE FLOW
1. Get customers' sample or product information to select the suitable blow molding machine model.
2. Communicate and negotiate to customers' detailed requirements and provide solution plan.
3. Confirm payment terms, price discount and make proforma invoice or contract, arrange down payment.
4. Start order production and report to customers the manufacturing progress in every week.
5. Machine is finished for mould test, bring forward commissioning report and arrange tail in works.
6. Invite customers for checking and acceptance,operation training, arrange loading and delivery.
7. Dispatch engineer for installation and commissioning, arrange machines' layout in customer' s site.
8. One year guarantee, after sales services, share our experience and remote technical support.
9. Feedback in time for customer's problem, provide solutions and customer's new project consulation.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2012
Total Annual:
4.5 Million-5.0 Million
Employee Number:
11~50
Ecer Certification：
Active Member
ZHANGJIAGANG BAISU MACHINERY MANUFACTURE CO., LTD is a professional manufacturer of Extrusion Blow Molding Machines, owning more than 14 years working experience in EBM machines' design, manufacturing, overhauling, service and project solutions. Our product line c... ZHANGJIAGANG BAISU MACHINERY MANUFACTURE CO., LTD is a professional manufacturer of Extrusion Blow Molding Machines, owning more than 14 years working experience in EBM machines' design, manufacturing, overhauling, service and project solutions. Our product line c...
Get in touch with us
Leave a Message, we will call you back quickly!