Biomass Boiler Air Preheater

Product Specification

Biomass Boiler Air Preheater

Descriptions:

Air preheater(APH)is the shell and tube type heat exchangers used for preheating the air which is fed to the boiler or furnaces/ kilns for combustion of fuels. Air preheater’s primary objective is to extract the waste heat from the flue gases leaving the boiler.

There are two types of air preheaters for use in steam generators in thermal power stations: One is a tubular type built into the boiler flue gas ducting, and the other is a regenerative air preheater.These may be arranged so the gas flows horizontally or vertically across the axis of rotation.

Advantage of air preheater

• Increases thermal efficiency of the system
• Payback period is very short and increase combustion rate
• Improve and strengthen the combustion
• Reduces the loss of furnace and the exhaust gas temperature, improve the boiler thermal efficiency.
• Air preheater is suitable for all standard fuels
• They are easy for retrofit into existing systems
• These air preheaters are suitable for all waste heat boiler / flue gas boiler / boiler types.
• They strengthen the heat transfer

Parameters

Boiler Air Preheater

1. Material of out shell: Galvanized-steel with painting, stainless steel, PU soft coat, aluminum-alloy.

2. Material of inner tank: Duplex stainless steel 2304/2205, SUS304, SUS316L are available.

3. Insulation: polyurethane resin foaming / PU soft coat.

4. Material of inner coils: Copper / stainless steel / wave stainless steel.

Company Information

Suzhou ORL Power Engineering Co., Ltd.is located in Suzhou, Jiangsu Province.

ORL Power is a leading company and exporter of industrial boilers,power plant boilersand boiler parts (including steam drum, membrane waterwall panel,header,economizer, evaporator, superheater,H-fin economizer, spiral fin tube, air preheater, heat pipe, flue etc.), seamless steel tubes/pipes and ERW steel pipes.ORL provides our customer with full range of services including boiler design, fabrication, installation and commissioning, boiler maintenance, and supervision at site. Our product and service include design and manufacture industrial boilers, pressure vessels and tanks, and pressure parts for power plant boilers (600MW, or 1000MW).

Working principle

1. The solar collector absorbs solar energy and transit the heat to the tank through heating-liquid.

2. When the temperature of collector and tank bottom temperature difference reach to 8 degree, the circulating pump start running to take the solar heat to tank.

3. The tank heat exchanger coil will transfer the heat with outside cold water to reach customer's hot water using.

4. If there is no sunshine or not enough sunshine, it can start E-heater, heat pump unit or other auxiliary heating sources ensure enough hot water for users.

FAQ

1. Why choose us?

We are boiler and boiler parts(boiler drum, boiler waterwall panel, boiler economizer, boiler header, boiler cyclone separator, boiler flue pipe, boiler air preheater, boiler pipe, boiler tube)manufacture and we are one of the best suppliers in China.

We ensure the deliver time, high quality, and the best after-sale service for you.

2. How to order?
Welcome come to our factory for inspecting and discussion the technical details.