UAV counter equipment 800-1500 meters air traffic control aerial vehicle driver

Product Specification

In recent years, the UAV market has developed rapidly. With the scale of Bochuang space-time shield and the production of factories, such as Xinjiang, extreme flight, zero-degree intelligent control and so on, commercial drones are very cost-effective and more and more popular. However, the domestic supervision of UAVs, especially the "Black Flying UAV", is still in a blank state. The proportion of unmanned aerial vehicles flying in the air is about 90%, which poses a great threat to air surveillance and air safety.


Shenzhen Bochuang Space-time Communication Technology Co., Ltd., as an excellent safety equipment supplier, independently developed the UAV jammer, which can jam all GNSS satellite positioning signals, including GPS/ Beidou/Gore/Galileo, and can also jam ISM 2.4G and ISM 5.8G frequency bands common to UAVs, forcing UAVs to stay in a remote state. Control, map positioning, signal interruption to achieve the purpose of landing/returning/hovering.

The UAV jammer independently developed by Bochuang Space-time Communication is powerful, and the long-distance interference can reach 1-5km.

Shenzhen Bochuang Space-time Communication Technology Co., Ltd. interfered and shielded GPS satellite positioning signals, and also interfered and shielded 2.4G and 5.8G frequency bands commonly used by UAVs, forcing UAV remote control, map positioning and signal interruption to achieve the effect of uncontrolled landing/hovering/hovering.

1.5G 20 40dB 24V 1A power amplifier

Power amplifier 2.4G 40 40db. 24V 1.2A

Power amplifier 5.8G 10 37db. 24V。 1A


The interference distance is 10,000-1,500 meters away from the flight altitude of the test standard UAV.

One Range

This standard specifies the technical requirements and test methods of the interference interceptor for portable unmanned aerial vehicles (hereinafter referred to as interceptor).

This standard is applicable to portable UAV jamming interceptor products.

Two. Product model


Three. Product description

The interceptor uses four kinds of portable rifle base stations, which mainly control the flight mode of UAV or flight state, and cut off the connection between UAV and remote controller. Interceptors can force drones to fall or return to the air through interceptors, thus ensuring the safety of low-altitude airspace in this area.

IV. Installation and Operation Instructions

4.1 Installation Steps and Methods

4.1.1 Take out the shield machine from the box.

4.1.2 Turn the antenna to its own antenna pedestal, otherwise it will be invalid.

4.1.3 Hang the shielding cover to the wall or corresponding position, and the best installation height is 1-2m.

4.1.4 First ensure that the shield machine is fully charged, and then turn on the power switch. The power indicator on the power supply indicates that it starts to work.

4.2 Precautions

4.2.1 The antenna must be installed on the host according to the corresponding identification before connecting the main power supply.

4.2.2 The effective coverage area of the shield is a circular area centered on the shield. In order to avoid blind corners of the shield, the placement position of the shield should be carefully selected.

4.2.3 Shields should be placed in well-ventilated places to avoid shielding large objects and strong electric and magnetic sources of strong heat sources, so as to ensure shielding effect and long-term stable work.

4.2.4 When the protective cover works, other articles should not be piled up and the antenna removed, so as not to affect the shielding effect and damage the machine.

4.2.5 When the shield is not in use, the power should be cut off in time, so as not to affect the normal use of the mobile phone.

4.2.7 When using the protective cover outdoors, attention should be paid to waterproof.

4.2.7 When the field area is larger than the effective shielding range, it is recommended to adopt multi-shielding honeycomb installation to ensure the shielding effect.

4.2.8 Since the power supply and antenna are dedicated to the host computer, the factory debugging is one-to-one debugging, so please try not to exchange them to ensure the best effect.

4.2.9 Please keep away from corrosive gases and liquids, and do a good job of preventing dust and moisture, so as not to accelerate the aging of internal components of the equipment.

4.2.10 When placed outdoors or in the wild, pay attention to adding protective devices to rats and ants.


Five. Maintenance and maintenance

5.1 Shielding is maintenance-free equipment without maintenance.

5.2 When cleaning the surface, it is forbidden to use chemical solvents and avoid water ingress.

5.3 When using, the protective cover should be stored in a dry and ventilated place to avoid long-term exposure to salt mist and harmful gases.

5.4 shielding