Plates Disposable Sugarcane Bagasse Tableware Making Machine

Product Specification

Sugarcane Bagasse Disposable Plates Making Machine,

for Tableware, Maximum Molding Area : 850MM*300MM · Sheet Extrusion, Blister Forming, Cutting, Stacking, Counting, Drying and Hot-Pressing Processes Are Continual Completed in One Machine Automatically · PLC · Sugarcane Bagasse Plates Manufacturing Machine

We are among the leading manufacturers, suppliers and exporters of a wide range of thermoforming blister machines that are highly appreciated for being reliable and compact. This fully automatic production line produces food boxes, trays, bowls, plates, etc.

Our entire range of machines mainly includes four machines:

1. Sheet Extrusion Machine

2. Blister Molding Machine

3. Punching Cutting Machine

4. The Smashing Machine (for recycling scrap edge into raw material granules) 

Easy lift angle
Easy to open and close, easy to use
Stronger sealing

Buckle cover tightly
Good sealing, not easy to leak
Better freshness

Reinforced chassis
Plus fixed type, strong pressure resistance
Not easily deformed

Automatic Sheet Extrusion and blister forming All in one Integrated machine Production Line

Schematic Diagram of the Process Flow of Sheet Extrusion and Blister Forming All in One Machine

Mechanical structure diagram

Sheet Extruder Line

First, prepare the raw material granules needed to make the product.

Granules are then melted and thoroughly mixed in the extruder part of the machine. Then, it comes out of the extruder outlet valve in the form of a paste-like sheet due to high pressure and high temperature. The dough taken out from the colander part of the machine is pressed between the colander rollers and adjusted to the specified thickness. The obtained roll is hardened and the width of the sheet is determined based on the relevant tableware required sheet. The produced roll enters the “roll collector” part of the machine. Finally, the output sheet of the conveyor part is collected as a roll on special rods.

Blister Molding Machine

Blister machine is also called thermoforming machine, Vacuum forming machine. It is a machine that sucks thermoplastic plastic or Bio-based degradable environmentally friendly materials rolls such as PP, PS, PE, EVOH, PBAT, PLA, etc., into various shapes of food containers packaging boxes, bowls, plates, trays and other products.

Product Track

Conveyor rails on the blister machine, including racks, chains, gears, support rods, limit rods, auxiliary rods, motors, etc.

Punching and Cutting Machine

The punching machine is a kind of mechanical equipment that, after the raw materials are installed, driven by the power mechanism, the punching die acts on the material to complete the punching. The punching machine can perform operations such as sheet processing, stamping, molding, embossing, etc. to force the metal into the mold.

The cutting machine is used for the division and cutting of sheets in all walks of life, it does not need any mold; it is controlled by the system software, and then directly cuts the product, as long as the corresponding parameters are set on the operating platform, the computer The corresponding instructions are transmitted to the cutting machine; the cutting machine will quickly cut according to the accepted design drawings, with high automation procedures and simple operation. It is also the cutting equipment used in our Integrated all-in-one sheet extrusion and blister forming machines.

The Smashing Machine (for recycling scrap edge into raw material granules)

The extra sheets obtained from the Blister thermoforming machines enter the crushing recycling machine also called the smash recycle machine grinder or grinding machine at the end of the biodegradable tableware production line. All the remaining sheets are grind and later enter the mixing room. After mixing and pulverizing, the grinded sheets are mixed with corn starch and other additives and again enter the granule making machine, which is the start of a biodegradable tableware production line. As it is clear from this description, the waste of producing biodegradable tableware is zero. Therefore, all raw materials are used in the line by different types of biodegradable machinery.

Scope Of Application

Our machines are suitable for the following materials :

1. Thermoplastics: PP, PS, PE, EVOH, etc.

2. Thermoplastic biodegradable plastics: PBAT and PLA, etc.

3. Bio-based degradable environmentally friendly materials, fully biodegradable plant fiber materials: grain fiber, corn starch, plant straw, rice husk, rice bran, bamboo powder, wood powder, bagasse, etc.

4. Bio-based composite materials, biodegradable plant fiber blend materials: talcum powder, calcium carbonate, etc.

5. Multilayered materials, Mineral-filled materials.

Our machines are not suitable for the following materials : PET, PVC, ABS

Q: what about the lead time? After an order is placed when to deliver?
A: The fastest delivery can be in 3 weeks once the order is confirmed. Generally, about 30-60 days, if available stock, it will be delivered soon.

Please be aware that our production lead times depend on specific items and item quantities.

Q: How to install the machine?

A: We will send a technician to your factory to install the machine, and teach your workers to use it. You pay all related costs, including visa charges, double-way tickets, hotel, meals, and technician salary.

Q: How can you send the equipment to my country?
A: FOB or CIF, we can arrange shipment to the destination port for you, as we have cooperated with experienced forwarding agents. We can quote you the competitive freight cost.

Q: Do you accept customized orders?
A: Yes, we do. ODM/OEM business partners will be warmly welcome.

Q: What is your MOQ?

A: We accept 1 unit as a trial order.