Edible Biodegradable Tableware Machine Plate Bagasse Making

Product Specification

Biodegradable Tableware Machine

PLA Plastic Disposable Lunch Food Box Tableware Equipment

Product Description

We are among the leading manufacturers, suppliers and exporters of a wide range of Thermoforming machines that are highly appreciated for being reliable and compact. This fully automatic production line is for producing food boxes, trays, bowls, plates and so on.

The fully automatic one step blister machine for Biodegradable Tableware Making refers to using raw material pellets (including leftover materials, fillers, etc.) directly into the equipment for production. The unit mainly includes three parts: extrusion, molding, punching and cutting, one stop production.

There is no need to buy sheets, no secondary heating, and scraps can be recycled without waste.

The equipment has wide adaptability, adapts to various materials, and the cost of upgrading or modification is relatively low.

Automatic Sheet Extrusion and blister forming All in one Integrated machine Production Line

Schematic Diagram of the Process Flow of Sheet Extrusion and Blister Forming All in One Machine

Mechanical structure diagram

Our entire range of machines includes four machines:

1. Sheet Extrusion Machine

2. Blister Forming Machine

3. Punching Cutting Machine

4. Crushing Recycling Machine (for recycling scrap edge into raw material granules)

Sheet Extrusion Machine

First, prepare the raw material granules needed to make the product.

Granules are then melted and thoroughly mixed in the extruder part of the machine. Then, it comes out of the extruder outlet valve in the form of a paste-like sheet due to high pressure and high temperature. The dough taken out from the colander part of the machine is pressed between the colander rollers and adjusted to the specified thickness. The obtained roll is hardened and the width of the sheet is determined based on the relevant tableware required sheet. The produced roll enters the “roll collector” part of the machine. Finally, the output sheet of the conveyor part is collected as a roll on special rods.

Blister Forming Machine

Blister machine is also called thermoforming machine, Vacuum forming machine. It is a machine that sucks thermoplastic plastic or Bio-based degradable environmentally friendly materials rolls such as PP, PS, PE, EVOH, PBAT, PLA, etc., into various shapes of food containers packaging boxes, bowls, plates, trays and other products.

Product Track

Conveyor rails on the blister machine, including racks, chains, gears, support rods, limit rods, auxiliary rods, motors, etc.

Punching Cutting Machine

The punching machine is a kind of mechanical equipment that, after the raw materials are installed, driven by the power mechanism, the punching die acts on the material to complete the punching. The punching machine can perform operations such as sheet processing, stamping, molding, embossing, etc. to force the metal into the mold.

The cutting machine is used for the division and cutting of sheets in all walks of life, it does not need any mold; it is controlled by the system software, and then directly cuts the product, as long as the corresponding parameters are set on the operating platform, the computer The corresponding instructions are transmitted to the cutting machine; the cutting machine will quickly cut according to the accepted design drawings, with high automation procedures and simple operation. It is also the cutting equipment used in our Integrated all-in-one sheet extrusion and blister forming machines.

Crushing Recycling Machine (for recycling scrap edge into raw material granules)

The extra sheets obtained from the Blister thermoforming machines enter the crushing recycling machine also called the smash recycle machine grinder or grinding machine at the end of the biodegradable tableware production line. All the remaining sheets are grind and later enter the mixing room. After mixing and pulverizing, the grinded sheets are mixed with corn starch and other additives and again enter the granule making machine, which is the start of biodegradable tableware production line. As it is clear from this description, the waste of producing biodegradable tableware is zero. Therefore, all raw materials are used in the line by different types of biodegradable machinery.

Scope Of Application

Our machines are suitable for the following materials :

1. Thermoplastics: PP, PS, PE, EVOH, etc.

2. Thermoplastic biodegradable plastics: PBAT and PLA, etc.

3. Bio-based degradable environmentally friendly materials, fully biodegradable plant fiber materials: grain fiber, corn starch, plant straw, rice husk, rice bran, bamboo powder, wood powder, bagasse, etc.

4. Bio-based composite materials, biodegradable plant fiber blend materials: talcum powder, calcium carbonate, etc.

5. Multilayered materials, Mineral-filled materials.

Our machines are not suitable for the following materials : PET, PVC, ABS

Tri Screw One Step Sheet Extrusion Blister Forming Integrated Machine Configuration

Auxiliary Equipment (Optional, Available for Purchase on Behalf Of)

WHY CHOOSE US

1. Professional Team

Professional service can recommend suitable products for you.

Factory direct sales can provide optional parameter customization.

2. Quality assurance

Our company has its own research&development and production base, the products have been seriously inspection the process department to control the quality before they leave the factory, ensure you receive a good quality machine.

3. Quick shipment

Whether you have your own freight forwarder or want us to organize the shipment, our purchasing department and the logistics department can do their best for you. We will provide the best transportation arrangement, according to your plan, to maximize your efficiency.

4. Shopping Guarantee

We have a professional service team, we can give you useful advice and the best packing solution. We 24 hours online service, and strive for an immediate response, to provide you with a wonderful procurement experience.