Nozzle size 1.5 Inch Low Noise BLDC Automotive Water Pump For Thermal Management

Product Specification

Payment Terms	L/C, T/T	Supply Ability	1000 sets per month
Delivery Time	5-10days	Packaging Details	PE bag+carton
Product name	Bextreme Shell Electric Water Pump	Power	240W
rate flow	2400L\H H=17M	operate voltage	18V-32V
Material	Cast Iron/Stainless Steel	Theory	Centrifugal Pump
Application	water,Submersible,Agriculture irrigation,automotive	color	silver
Structure	Single-stage Pump	Brand Name	Bextreme Shell
Model Number	OWP-BL43-408T	Place of Origin	China
High Light	1.5Inch Nozzle Electric Water Pump ，Electric Water Pump 240W ，SUS304 Automotive Water Pump

 

Bextreme Shell 1.5 inch Nozzle Size Low Noise Electric Water Pump With PWM Signal Speed Controlling For Thermal Management System Energy Storage Equipment

Bextreme Shell OWP-BL43-408T SERIES brushless DC water pump

Boosting/circulation/Variable-frequency/Low-noise/centrifugal pump PWM control/Fault diagnosis

 

This electronic water pump with compact structure,small size,easy installation and high efficiency, is single-stage centrifugal water pumps.The body of the water pump is constructed of high quality die-cast aluminium alloy.BLDC motor inside allows our pumps operate continuously without maintenance and is trusted by our customers for its nice quality long service life and low maintenance cost.Get technical data please click here.

 

■Electrical parameter

Working Voltage (VDC)	Rated power (W)	Rated flow (L/H)	Dimensions (mm)	Weight (g)
18V-32V(24V)	240W	Q=2400L/H, H=17m	185*90*155	2200g

 

Connector model and the corresponding electrical properties(as shown below)

 

AMP282106-1 (matched Plug AMP282088-1)	1( Black)	2( Yellow)	3(Blue)	4(Red)
	GND	Fault feedback	PWM	+24V

 

■Usage

Widely used in hybrid bus, hybrid passenger car, electric vehicles, trains, ships and other heating and cooling circulation system.

 

■Driving device (Including motor)

Driving rotor: PPS plastic capsulated magnet

Screws and nuts: SUS 304 stainless steel

Driving Motor : brushless DC motor

Motor wire frame :PPA GF

Pump housing: Die-casting aluminum case with sandblasting and anodizing +PE powder coating..

 

Bracket: steel

Bracket hoop: US 304 stainless steel

Waterproof based on IP68 rating (en60529)

Connector model: AMP282106-1 (matched Plug AMP282088-1)

Nozzle diameter:38mm (1.5 inch)

 

 

■Selling points

• Diagnostic signal output
• With constant flow controlling
• Reverse polarity protection
• Dry running protection
• Over Voltage, over current protection
• Overload, over temperature protection
• Centrifugal pump
• Magnetic force transmission
• High efficiency brushless DC motor, low power consumption, high efficiency, long service life.
• With wide range operating temperature
• PWM signal speed controlling

 

■Technical description (related parts in contact with the liquid)

Pump head housing: Die casting aluminum alloys

Impeller: PPS+GF

Shield cavity: PPS+GF

Shaft sleeve: carborundum composite materials

Shaft: stainless steel(3CR14) shaft

Magnet housing: PPS plastic capsulation

Seal ring: EPDM

EMC: Grade 3

Noise:≤61dB

 

 

 

■PWM character

 

Duty Cycle	Description	Remark: 1:PWM duty cycle metrical error ±2% 2:PWM voltage:24VDC, frequency:50-1000Hz 3: Recommended PWM frequency:500Hz 4: Recommended 0% duty as PWM disconnect
0%≤duty≤10%	PWM mode (stop)
10%≤duty≤55%	PWM mode (Min speed)
56%≤duty≤90%	PWM mode (Linear speed control range)
90%≤duty≤100%	PWM mode (max speed limit)

 

Recommended Wire size is (Based on 3% voltage drop)

 

* The length of the wire means the distance from pump to the battery

 

Wire dia.	The longest wire used *
	24V
1.5 mm²	16m
2.5 mm²	25m
3 mm²	31m
4 mm²	40m

 

 

■ Temperature parameter

Medium liquid temperature: -40℃ to +85℃ (-40°F to + 185°F)

Working ambient temperature: -40℃ to +120℃ (-40°F to +248°F)

Storage temperature: -40℃ to +70℃ (-40°F to +158°F)

(up to 100 ℃, but it will shorten the service life)

 

Medium liquid: liquid mixture (Water with below 60% glycol)​

 

 

■ System pressure

-0.2 to 2.5 bar ( 100℃ (212°F).

The service life is more than 20,000 hours based on the rated voltage and 36℃(86°F) ambient temperature.

 

 

■ Voltage range

Rated 24V water pump, workable range 18V - 32V

Although the motor can be used in a wide range of voltage and temperature, but excessive or too low voltage and temperature will affect the service life of the motor, the pump can not be exposed to thermal radiation ambient.

 

 

■ Attentions

1.Working ambient temperature:-40℃--120℃, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature.

2.The installation position of the water pump should as much as possible close to the low water level , to extend the service life of the pump.

 

3.Please use the pump far from the dusty environment, the dust is harmful to reduce the service life

4.Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump

 

 

 

■ Applications

FAQ

 

1.Q:Can I place a sample order?

Yes, we welcome sample order to test and check quality. Mixed samples are acceptable

 

2.What about the lead time?

It is spending 30 days generally after you making the payment.

 

3.Do you provide technology support?
YES. Our company have strong R&D capability, we can provide technology support if you need.

 

4. How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc

 

5. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.