Changzhou Junqi International Trade Co.,Ltd
| Payment Terms | T/T,L/C,Paypal |
| Supply Ability | 1000sets/day |
| Delivery Time | 5-10 days |
| Packaging Details | PE bag+ carton |
| Product Name | Brushless Dc Motor Driver Board |
| Working Voltage | 12VDC-36VDC |
| Working Current | 15A |
| Speed Control | 0-5V or PWM |
| Brushless | for Hall sensor motor |
| Technical Support | Yes |
| Color | Green |
| Brand Name | JUYI |
| Model Number | JYQD-V7.3E2 |
| Certification | CE, |
| Place of Origin | China |
View Detail Information
Explore similar products
JYQD-V8.3B 24VDC 150W BLDC motor driver board for sensorless DC motor based on
5V~28VDC Max 5A Driver Board JYQD_V8.20B For Without Hall BLDC Motor
12V,24V,36V,5A,10A,15A 500W brushless DC motor driver,Hall sensor,brushless DC
3 Phase 150w Brushless DC Motor Driver JYQD-V8.3B for electricl tools speed
Product Specification
| Payment Terms | T/T,L/C,Paypal | Supply Ability | 1000sets/day |
| Delivery Time | 5-10 days | Packaging Details | PE bag+ carton |
| Product Name | Brushless Dc Motor Driver Board | Working Voltage | 12VDC-36VDC |
| Working Current | 15A | Speed Control | 0-5V or PWM |
| Brushless | for Hall sensor motor | Technical Support | Yes |
| Color | Green | Brand Name | JUYI |
| Model Number | JYQD-V7.3E2 | Certification | CE, |
| Place of Origin | China | ||
| High Light | 3 Phase Induction Motor Controller | ||
Specifications
| Operating Voltage | DC 12V-36V |
| Operating current | ≤15A |
| Output power | ≤500W |
| Speed control | 0.1V-5V or PWM input |
| Operating temperature | -40-85℃ |
| Operating humidity | ≤90% |
| Protection | Overload protection, locked-rotor protection, over-current protection |
| Functions | Speed pulse signal output, soft reversing (485,CAN port optional) |
| Overall dimension | 63X42.5X17mm (L*W*H) |
| Net weight | 30g |
| Optional component | Speed regulating potentiometer external 5 digit tachometer |
ATTENTION:
1: This brushless DC motor driver board is widely apply to DC Brushless with Hall sensor (120°angle) three-phase brushless DC motors
2:please make sure to add heat sink when the output power more than 60W.
3: As the BLDC motor factory may use different Hall sequence,if the motor start abnormal, can't start or the current getting to high, please adjust the sequence of the Hall, or the driver will be damaged.
4:Please offer the right voltage to the driver, do not exceed the operating range. and the driver has built-in 5V for speed control, DO NOT connect extra power supply( 5V ) into the driver for speed controlling, it will damage the driver.
Wiring instructions:
1. Control port
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
Signal— Speed pulse signal output
GND—Used for Driver board internal control
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
P- ----DC-
P+----DC +
3:Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output
4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
5. Control port distance: 2.54mm,Power port distance:3.96 mm
6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
Dimensional Drawing:
We can add the wire connectors and heatsink.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2020
Total Annual:
100-300
Employee Number:
>100
Ecer Certification：
Verified Supplier
Changzhou Junqi Mechanical Electronics Co.,Ltd is a professional Exporter relies on five parnter physical factories. The main products: Auto Parts( Power window switch,Auto electric water pumps, Auto lock, Door handle, Wipper motor and window regulator motor), Stepping motor and driver, Bru... Changzhou Junqi Mechanical Electronics Co.,Ltd is a professional Exporter relies on five parnter physical factories. The main products: Auto Parts( Power window switch,Auto electric water pumps, Auto lock, Door handle, Wipper motor and window regulator motor), Stepping motor and driver, Bru...
Get in touch with us
Leave a Message, we will call you back quickly!