Changzhou Junqi International Trade Co.,Ltd
| Payment Terms | T/T,L/C,Paypal |
| Supply Ability | 10000sets/Month |
| Delivery Time | 5-10 days |
| Packaging Details | PE bag+ carton |
| Product Name | Brushless Dc Motor Driver Board |
| Working Voltage | 12/24VDC |
| Max current | 3A |
| Working Current | 2A |
| PWM Speed Control | PWM frequency:1-20KHz,Duty cycle 0-100% |
| Analog voltage speed regulation | 0-5v |
| Brushless | for sensorless brushless dc motor |
| Technical Support | Yes |
| Color | Blue |
| Speed pulse signal output | Yes |
| Brand Name | JUYI |
| Model Number | JYQD-V8.10B |
| Certification | CE, |
| Place of Origin | China |
View Detail Information
Explore similar products
24VDC 500w Brushless Dc Motor Driver Board 12-36v 3 Phase Motor Speed Controller
JYQD_V7.3E3 12V-36V 15A Brushless Dc Motor Control Drive board
15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller
500W Brushless DC Motor Driver , Hall Effect 24 Volt DC Motor Speed Controller
Product Specification
| Payment Terms | T/T,L/C,Paypal | Supply Ability | 10000sets/Month |
| Delivery Time | 5-10 days | Packaging Details | PE bag+ carton |
| Product Name | Brushless Dc Motor Driver Board | Working Voltage | 12/24VDC |
| Max current | 3A | Working Current | 2A |
| PWM Speed Control | PWM frequency:1-20KHz,Duty cycle 0-100% | Analog voltage speed regulation | 0-5v |
| Brushless | for sensorless brushless dc motor | Technical Support | Yes |
| Color | Blue | Speed pulse signal output | Yes |
| Brand Name | JUYI | Model Number | JYQD-V8.10B |
| Certification | CE, | Place of Origin | China |
| High Light | 12VDC BLDC motor controller board ，24VDC Sensorless Motor board ，V8.10B BLDC motor controller board | ||
12-24VDC 2A Original JUYI Tech JYQD-V8.10B bldc motor driver board for sensorless brushless DC motor
| Model number | JYQD-V8.10B |
| Operating temp. | -20--85℃ |
| Operating voltage | 12V-24V |
| Max current | 3A |
| Cont.working current | 2A |
| PWM speed control | PWM frequency:1-20KHZ; Duty cycle 0-100% |
| Analog voltage speed regulation | 0-5V |
| O.V / L.V protection | YES |
| Speed pulse signal output | YES |
Driver board diagram
Wiring diagram
5V -----Driver board internal output voltage
M ---- Motor speed pulse signal output port, 5V pulse signal.
1. Control port
Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
GND—Used for Drive board internal control
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND----DC-
VCC----DC +
3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
4.Control port distance: 2.54mm,Power port distance:2.54 mm
5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
Application notes:
| 1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified. |
| 2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment) |
| 3. JYQD-V8.10B driver board is bare board without housing and heatsink. If the power of the motor below 36W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 36W, it must add heatsink. |
| 4. Please take note that JYQD-V8.10B driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection. |
| 5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal. |
| 6. The “M” terminal on the JYQD-V8.10B driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA. |
Dimensional drawing
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2020
Total Annual:
100-300
Employee Number:
>100
Ecer Certification：
Verified Supplier
Changzhou Junqi Mechanical Electronics Co.,Ltd is a professional Exporter relies on five parnter physical factories. The main products: Auto Parts( Power window switch,Auto electric water pumps, Auto lock, Door handle, Wipper motor and window regulator motor), Stepping motor and driver, Bru... Changzhou Junqi Mechanical Electronics Co.,Ltd is a professional Exporter relies on five parnter physical factories. The main products: Auto Parts( Power window switch,Auto electric water pumps, Auto lock, Door handle, Wipper motor and window regulator motor), Stepping motor and driver, Bru...
Get in touch with us
Leave a Message, we will call you back quickly!