50 Tests Colloidal Gold Swab Test Kit COVID-19 Antigen Rapid Test

Product Specification

COVID-19 Antigen Rapid Test Kit (Colloidal Gold)

1.【CATALOG NO. AND PACKING SPECIFICATION 】

2.【INTENDED USE】

The COVID-19 Antigen Test Kit is used for rapid qualitative detection of SARS-CoV-2 virus nucleocapsid antigen in the anterior nasal cavity (wet nasal cavity) of the suspected sars-cov-2 patients within 7 days after symptoms.

Only for in vitro diagnostic use.【STORAGE AND STABILITY】

1. Store at 2℃ to 30℃ in the sealed pouch up to the expiration date (24 months).

2. Keep away from sunlight, moisture and heat.

3. DO NOT FREEZE.

4. When the humidity is below 60%, use it within 1 hour after opening. When the humidity is above 60%, use it immediately after opening. Production date, expiry date will be in the label.

3.【TEST PROCEDURE】

1. Specimen extraction

1. Add 0.5mL (about 10 drops) of the sample extraction buffer into the extraction tube.
2. Insert the swab into the extraction tube which contains 0.5mL of the extraction buffer. Roll the swab at least 6 times while pressing the head against the bottom and side of the extraction tube.
3. Leave the swab in the extraction tube for 1 minute.
4. Squeeze the tube several times with fingers from outside of the tube to immerse the swab. Remove the swab. The extracted solution will be used as test sample.
5. Fit the dropper tip with filter on top of the extraction tube tightly.

2. Detection operations:

1. Open a pouch containing a test cassette. Place the test cassette on a dry, horizontal work surface.
2. Add 2 drops (about 60μl) of sample solution extract to the sample well of the test cassette.
3. Observe the results showed within 10-15 minutes, and the results showed after 15 minutes have no clinical significance.

​

4.【INTERPRETATION OF RESULTS】

Negative : Only a red line appears in the quality control area (C), and no line appears in the test area (T).

Positive : Two red lines appear. One is in the test area (T) and the other is in the quality control area (C).

Invalid : No red line displays in the quality control area (C). This indicates that the incorrect operation or the test cassette has deteriorated or damaged. Repeat the test with a new kit. If the problem persists, stop using this lot number immediately and contact your local supplier.

​