Product Specification

Compression Gate Valve

Types:Description About Compression Gate Valve

Compression Gate Valve

CGV-2005

What is a Compression Gate Valve

A compression gate valve is a type of valve that uses a gate or a wedge mechanism to control the flow of fluid through a pipeline. It is commonly used to start, stop, or regulate the flow of liquids or gases. The term "compression" refers to the valve's sealing mechanism, which involves compressing a gate or wedge against the valve seat to create a tight seal and prevent the flow of fluid.

Key features and aspects of a compression gate valve:

1. Valve Design:

A compression gate valve has a gate or wedge-shaped element that can be lowered into or raised out of the path of the fluid flow. When the gate is lowered, the valve is closed, and when it is raised, the valve is open.

2. Gate Mechanism:

The gate or wedge mechanism moves perpendicular to the direction of fluid flow, creating an unobstructed passage when the valve is open and blocking the flow when the valve is closed.

3. Sealing Mechanism:

The gate or wedge is designed to fit tightly against the valve seat, creating a reliable seal that prevents leakage when the valve is closed.

4. Compression Sealing:

The compression aspect of the valve comes into play when the gate or wedge is lowered to seal against the valve seat. The gate is compressed against the seat to create a tight seal and prevent the flow of fluid.

5. Full or Partial Flow Control:

Depending on the position of the gate or wedge, the valve can allow full flow, partial flow, or complete shut-off of the fluid.

6. Manual Operation:

Compression gate valves are typically operated manually using a handwheel, lever, or actuator. Turning the handwheel or operating the lever moves the gate mechanism to open or close the valve.

7. Durability:

These valves are designed for durability and can handle a wide range of pressures and temperatures.

8. Applications:

Compression gate valves are used in various industries, including water supply, oil and gas, chemical processing, power generation, and more.

9. Types of Gate Valves:

There are different types of gate valves, including rising stem gate valves (where the stem rises as the valve is opened) and non-rising stem gate valves (where the stem remains stationary as the valve is opened).

10. Advantages:

Compression gate valves provide a positive shut-off, making them suitable for applications where leakage needs to be minimized or prevented entirely.

They can handle high-pressure and high-temperature environments.

In summary, a compression gate valve is a type of valve that uses a gate or wedge mechanism to control fluid flow. The compression aspect of the valve refers to the tight sealing achieved when the gate is pressed against the valve seat. These valves are widely used in industrial applications for their reliability and ability to control fluid flow effectively.

How to connect the Compression Gate Valve

Connecting a compression gate valve involves installing the valve within a pipeline to control the flow of fluid. Here's a general guide on how to connect a compression gate valve:

Tools and Materials You Might Need:

Compression gate valve

Pipe cutter or hacksaw

Pipe reamer or deburring tool

Pipe wrench or adjustable wrench

Teflon tape or pipe thread sealant

Wrench for tightening compression nuts (if applicable)

Pipe fittings (if necessary)

Safety equipment (gloves, safety goggles)

Steps:

Prepare the Pipeline:

Make sure the pipeline is properly cut and prepared for the installation. Use a pipe cutter or hacksaw to cut the pipe where you want to install the valve.

Debur the Pipe Ends:

After cutting, use a pipe reamer or deburring tool to remove any rough edges or burrs from the cut pipe ends. This ensures a clean surface for proper sealing.

Valve Inspection:

Before connecting the valve, inspect it for any damage or defects. Check that the gate is moving freely and that the valve's sealing components are in good condition.

Apply Thread Sealant:

If the valve has threaded connections, apply Teflon tape or pipe thread sealant to the threaded ends of the valve. This helps create a secure and leak-free seal when connecting the valve to the pipeline.

Connect the Valve:

Insert the threaded end of the valve into the pipeline opening. Turn the valve clockwise to tighten it onto the pipe. Use a pipe wrench or adjustable wrench to ensure a snug fit, but avoid over-tightening to prevent damage to the valve threads.

Positioning and Alignment:

Make sure the valve is properly aligned with the pipeline. The valve should be installed with the gate in the open position to avoid any flow restrictions during installation.

Secure Compression Nuts (if applicable):

If your compression gate valve has compression fittings, slide the compression nuts onto the pipe ends and then insert the compression ring onto each pipe. Push the pipe into the valve's compression fittings and tighten the compression nuts with a wrench until snug.

Testing:

Once the valve is connected, turn on the water supply to test for leaks. Slowly open and close the valve to ensure smooth operation and proper sealing.

Final Adjustments:

If needed, make final adjustments to the valve's position or tightness to ensure optimal functionality.

Valve Labeling (if required):

If the valve is part of a larger system, consider labeling the valve for identification and easy operation.

Remember that the specific steps might vary based on the design of the compression gate valve, the type of pipeline, and the application. Always follow the manufacturer's instructions and adhere to safety guidelines during installation. If you're not experienced with plumbing work, it's advisable to seek the assistance of a professional plumber.

OEM Logo Polybag, Colour Boxs, Colour Master Carton

• FAQ

Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.

Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.

Q: Can you accept OEM,ODM?
A: we accpet OEM.

Q: How long is your delivery time?
A: 30-35 days After Confirm Order
​