Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser

Product Specification

Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser

1.The Bottle Warmer Equipment Overview and Application:
The bottle warmer is a device that uses hot water spray to increase the temperature. It is mainly used in production lines that use low-temperature filling methods and need to raise the product temperature to room temperature later, such as carbonated beverages, various carbonated waters, etc., to increase the temperature of the bottle and its contents, reduce the temperature difference with the ambient temperature, eliminate condensed water on the outer surface, and ensure the subsequent processes such as labeling and packaging.

2.Application Scenario for The bottle warmer.
The bottle warmer is widely used in water production line, beverage production line, canned food production line, pet food production line, beer production line, liquid seasoning production line, etc.

3.The Bottle Warmer Bottle warming machine design basis: (customized according to actual customer needs)

Bottle type and material: 600ml plastic bottle;
Production capacity: 36,000 bottles/hour (production capacity is based on 600ml bottle type, and the equipment is suitable for multiple varieties of products);
Processing time: 5-7 minutes (frequency control can be performed according to process requirements);
Effective processing area: 19.61㎡ (mesh belt width 1524, axis center 12730);
Applicable bottle height: ≤350mm;
Number of temperature zones: 2 sections;
Inlet temperature: 18℃;
Outlet temperature: 24-25℃ (above dew point);
Heating method: rapid heat exchange with steam;
Equipment dimensions: (length*width*height) 14530mm*2395mm*2950mm (subject to actual equipment dimensions)

4.This Bottle Warmer has the following features:
1) Highly reliable conveying device and flexible and convenient speed change system.
The conveyor belt used to convey bottles is a high-strength heavy-duty conveying plastic chain net with a pitch of 2 inches. It has good strength, high temperature resistance and wear resistance. The module design has hard cross ribs, and the polygonal sprocket can best support the module. Standard chain nets are provided in high-temperature and chemical-resistant polypropylene.
The chain net combined with the DTS-C dynamic transition conveyor system can exert the best product handling capacity. The system consists of a static comb plate and a dynamic DTS chain net. The chain net is located on the surface of the DTS-C comb plate, allowing the product to be automatically transitioned; the above characteristics are particularly important when the product cannot stay at the transition point of the bottle warmer feeding. The DTS-C transition conveyor system does not require a sweeper and can achieve better production line efficiency. The DTS chain net and the chains on the main feeding and discharging conveyors in the system are supported by the same friction strip on the comb plate, which can save installation time and avoid excessive conveyor adjustment processes.
The main drive uses a frequency converter to adjust the speed of the main motor. By changing the frequency of the motor, the conveying speed of the conveyor belt can be easily adjusted.
2) Efficient spraying system
This machine uses atomizing nozzles arranged neatly and orderly above the chain plate to spray all parts of the bottle evenly, so that the spray water can be fully utilized. The spray coverage area is large, ensuring the maximum heat transfer efficiency, improving the efficiency of warming the bottle, and reducing energy consumption.
3) Sensitive temperature control, simple and efficient setting
Through the temperature sensor set in the functional area of ​​the equipment, according to the process parameters set by the system, the temperature of the spray water is efficiently and accurately controlled to heat the product to the temperature required by the process. At the same time, according to the optimization of the system software, energy consumption is reduced and energy utilization efficiency is improved.
4) Cold recovery system
The first section of the equipment is a low-temperature energy recovery system. It uses the low-temperature characteristics of the product to collect the cooled water, and then uses the customer's self-provided water cooling system as a refrigerant medium for water-cooled air conditioning, and uses it as a cooling device for relevant positions in the workshop. Save energy and improve the working environment of the car position.

5.Bottle Warmer Technical parameters:
1) Structural form
a.The main body of the bottle warmer is divided into: cold recovery section, heating zone 1, heating zone 2, and insulation section. (Design and configuration according to actual customer requirements)
b.The main drive is driven by a reducer (speed adjustable, speed controlled by a frequency converter), and the plastic chain network is transported.
c. Heating method: steam heating.
d.Temperature control: PID control pneumatic diaphragm regulating valve.
e. Treatment method: forced spray heating of beverages.
2) Production capacity:
600ml PET bottle: 36000BPH (calculated according to the actual production capacity of the customer)
3) Set temperature and processing time:
For 600ml PET bottle (calculated according to the actual production capacity of the customer)
Set temperature: 25-30C (adjustable)
Total processing time: 5-7 minutes
4) Applicable bottle type: diameter 50-95, height: H370mm
5) Effective processing area: 19.61㎡
6) Power consumption: 19.1kw
Main motor: 1.1kw
Bottle in and out motor: 2*0.75kw=1.5kw
Water pump motor: 35.5kw=16.5kw
7) Water and steam consumption (calculated according to the actual production capacity of the customer)
① Water start-up consumption: 6 tons
② Water operation consumption: 90-145kg/H
③ Steam starting pressure is 0.5MPa.
④ Steam consumption 1260kg/h
⑤ Compressed air pressure is 0.5MPa.
8) Dimensions
① (length * width * height) 14530mm*2395mm*2950mm (subject to actual equipment size)
② Working height (in and out of bottle): to be determined

6.Quotation and delivery time for Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser:

(1).Quotation validity period: 1 month;
(2).Payment method: T/T, L/C.
(3).Customers provide the product and packaging samples required for factory trial free of charge;
(4).Delivery time: 60 working days from the receipt of customer deposit and product packaging samples.

7.Quality Assurance for Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser:
(1).The company guarantees that the goods provided are brand new, unused, made of the latest design and suitable materials, and meet the quality, specifications and performance specified in the technical contract in all aspects;
(2).The company guarantees that after the production line is properly guided, installed and debugged, the equipment will reach the various technical performance indicators of the product within 15 days of the entire system being put into operation;
(3).The company guarantees that within the quality assurance period specified in the contract, it will be responsible for defects, failures and damages of the production line caused by defects in the design, process, manufacturing, installation, debugging or materials provided and the quality of the seller's equipment;
(4).The equipment quality assurance period is 12 months after the acceptance of the production line. If during the quality assurance period, it is found that the quality or specifications of the equipment do not meet the contract provisions, or it is proved that the equipment is defective (including potential defects or the use of unqualified materials, etc.), the buyer has the right to propose rectification to the seller within the product quality assurance period according to the inspection certificate issued by the statutory department;
(5).The company guarantees the mechanical properties of the equipment provided, the quality of the product and the consumption indicators of the product.

8.Equipment warranty for Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser:
(1).After the equipment is accepted, a 12-month warranty is provided, and the control system (standard Huichuan brand) provides a 24-month warranty; during the warranty period, our company will provide users with free spare parts and timely and effective services (wearing parts are not covered by the warranty);
(2).If the equipment fails and needs to be repaired on site, our company guarantees that the maintenance personnel will rush to the customer's site within 48 hours to help the customer eliminate the fault in time (except for force majeure);
(3).After the warranty period, our company will provide users with a wide range of preferential technical support, sufficient spare parts supply and other after-sales services for life;

9.Packaging and transportation for Performed Plastic Bottle Pasteurization Machine Warmer Pasteuriser:
(1).Packaging method:
The packaging uses new and sturdy special packaging boxes or fixed frames, which are suitable for long-distance transportation, moisture-proof, rust-proof, shock-proof, suitable for land transportation, sea transportation and overall lifting.
(2).Transportation method: land transportation, sea transportation.