1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry

Product Specification

1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry

1. Introduction to the cap feeding machine:
At present, in the daily chemical, food, medicine and other industries, the cap feeding machine is widely used. The capping machine is mass-produced and processed. If the aluminum cap of the can is installed manually, not only the production efficiency is low, the processing cost is increased, but also there are safety hazards. If the operation is improper, it will cause personal injury.

1). Applicable to can products.
2). The transmission method adopts a round belt attached to the slide, which is easy and simple to adjust.
3). The frame such as the body plate is welded with stainless steel, and the whole machine is simple and beautiful.
4). The mobile cap feeding part adopts the upper and lower synchronous belt structure to provide sufficient power for the aluminum cap to enter the capping machine.
5). Most of the components of the cap feeding section are formed by bending, which has the advantages of good rigidity, light weight and good interchangeability.
6). Adjustable guardrails are installed at both ends of the aluminum cap, which can be applied to a variety of cap types and improve the stability when feeding the cap.

Overview of the fully automatic high-speed plastic capping machine: This machine is mainly used for fully automatic capping of tinplate cans and other plastic caps. The entire capping process is automatically controlled by PLC computer programming. It uses an automatic can separation device and a can anti-reverse positioning device, a synchronous constant speed automatic capping device, and an automatic cap sorting and delivery device. The entire capping process automatically feeds cans, separates cans, sorts caps, and adds caps. It also automatically and synchronously caps, replacing manual capping methods and traditional semi-automatic capping equipment, saving manpower and greatly improving production efficiency.

2.Equipment features:
1). Replaces manual capping and traditional semi-automatic capping equipment, can save a lot of labor and improve production capacity.
2). Adopts PLC computer programming computer automatic control system to improve the accuracy of mechanical movement and easy operation.
3). Automatic cap separation, cap for cans/no cap for cans, automatic online work.
4). Anti-can body overturning, synchronous constant speed, stable movement.
5). Automatic shutdown alarm for can jamming and lack of cap, high operational adaptability.
6). Adopts famous brand products such as Mitsubishi (MITSUBISHI) PLC programmable computer automatic controller, SICK (SICK) photoelectric switch, etc., the equipment is stable and has excellent performance.
7). It has automatic random cap sorting function, suitable for random cap addition, and the equipment has high adaptability.

3.Introduction to the main mechanisms of the equipment:
1) Automatic cap sorting and distribution device
The automatic cap sorting and distribution device automatically arranges the caps of a whole box or a whole bag, and uses compressed air to accelerate the cap feeding and distribution, high-speed cap feeding, and automatic linkage to cooperate with the capping action. The operator only needs to put the whole box or bag of random caps into the cap feeding and lifting machine on the ground.
2) Automatic can separation device
This device can split the cans that are tightly connected at high speed before capping according to the requirements of different capping speeds, divide the cans into equal distances and arrange them, so that each can is capped one by one, preventing inaccurate capping positions and repeated capping.
3) Can body anti-fall positioning device
Using the principle of can type characteristics, a special matching device is installed on the conveyor belt to form an anti-fall positioning device in combination with the guard plate to prevent the can body from tilting and falling when the cap is fed and capped.
4) Synchronous constant speed automatic capping device
Using a single motor power source, the can conveyor belt and the capping device are driven synchronously and at a constant speed. The capping action moves with the can, dissolving the capping resistance and preventing the can body from tipping over when the can is fed and capped at high speed.
5) PLC computer automatic control system

Through the cooperation of photoelectric switches, PLC computer programming automatically controls the entire capping process, automatic capping, capping when there is a can/no capping when there is no can

Automatic shutdown alarm for can jamming and lack of cap, automatic online control of automatic can separation device and can body anti-fall positioning device, automatic cap separation and distribution, and synchronous and constant speed automatic capping.

4. Technical parameters:
1) Production capacity: 50~300 cans/minute (depending on the specific can type and lid quality)
2) Applicable lids: flat-top plastic lids, concave-convex plastic lids, plastic lids with spoons, etc.
3) Applicable size: tinplate cans (square)
4) Material: 304 stainless steel
5) Motor power: 1.5 kW
6) Capping machine dimensions (length × width × height): 1360 × 950 × 2000 mm, capping machine: 830 × 1100 × 3000 mm
7) Weight: about 680 kg

5. Equipment configuration:

5.Quotation and delivery time for 1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry:

(1). Quotation validity period: 1 month;
(2). Payment method: T/T, L/C.
(3). Customers provide the product and packaging samples required for factory trial free of charge;
(4). Delivery time: 60 working days from the receipt of customer deposit and product packaging samples.

6. Quality Assurance for 1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry:
(1). The company guarantees that the goods provided are brand new, unused, made of the latest design and suitable materials, and meet the quality, specifications and performance specified in the technical contract in all aspects;
(2). The company guarantees that after the production line is properly guided, installed and debugged, the equipment will reach the various technical performance indicators of the product within 15 days of the entire system being put into operation;
(3). The company guarantees that within the quality assurance period specified in the contract, it will be responsible for defects, failures and damages of the production line caused by defects in the design, process, manufacturing, installation, debugging or materials provided and the quality of the seller's equipment;
(4). The equipment quality assurance period is 12 months after the acceptance of the production line. If during the quality assurance period, it is found that the quality or specifications of the equipment do not meet the contract provisions, or it is proved that the equipment is defective (including potential defects or the use of unqualified materials, etc.), the buyer has the right to propose rectification to the seller within the product quality assurance period according to the inspection certificate issued by the statutory department;
(5). The company guarantees the mechanical properties of the equipment provided, the quality of the product and the consumption indicators of the product.

7. Equipment warranty for 1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry:
(1). After the equipment is accepted, a 12-month warranty is provided, and the control system (standard Huichuan brand) provides a 24-month warranty; during the warranty period, our company will provide users with free spare parts and timely and effective services (wearing parts are not covered by the warranty);
(2). If the equipment fails and needs to be repaired on site, our company guarantees that the maintenance personnel will rush to the customer's site within 48 hours to help the customer eliminate the fault in time (except for force majeure);
(3). After the warranty period, our company will provide users with a wide range of preferential technical support, sufficient spare parts supply and other after-sales services for life;

8. Packaging and transportation for 1.5kW Cap Feeder Machine Tin Can Capping Machine In Food Beverage Industry:
(1). Packaging method:
The packaging uses new and sturdy special packaging boxes or fixed frames, which are suitable for long-distance transportation, moisture-proof, rust-proof, shock-proof, suitable for land transportation, sea transportation and overall lifting.
(2). Transportation method: land transportation, sea transportation.