Beijing Jinshengxin Testing Machine Co., Ltd.
| Standards | GB/T16584-1996, ASTMD5289-95, ISO6502-1999（E） |
| Range of temperature | Room temperature - 200 ℃ |
| Temperature measuring accuracy | 100-200 ℃, ±0.01 ℃ |
| Stability of temperature control | 100-200 ℃, ± 0.1 ℃ |
| Torque display accuracy | 0.001N.m |
| Die cavity frequency | 1.7Hz |
| Set the temperature range | 0-200 ℃; |
| Set the smallest unit | 0.1 ℃ |
| Set time range | 0—200 mins； |
| Brand Name | JINHAIHU |
| Certification | ISO 9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
5-35 ℃ Rubber Testing Instruments Ozone Aging Chamber With ASTM1149 Standard
0.5J 15mm Rubber Rebound Resilience Tester
Fully Automatic Rubber Testing Instruments Mooney'S Viscosimeter ISO9001
Electric Heating Rubber Testing Instruments Flat Plate Vulcanization Machine
Product Specification
| Standards | GB/T16584-1996, ASTMD5289-95, ISO6502-1999（E） | Range of temperature | Room temperature - 200 ℃ |
| Temperature measuring accuracy | 100-200 ℃, ±0.01 ℃ | Stability of temperature control | 100-200 ℃, ± 0.1 ℃ |
| Torque display accuracy | 0.001N.m | Die cavity frequency | 1.7Hz |
| Set the temperature range | 0-200 ℃; | Set the smallest unit | 0.1 ℃ |
| Set time range | 0—200 mins； | Brand Name | JINHAIHU |
| Certification | ISO 9001 | Place of Origin | China |
| High Light | rubber testing equipments ，rubber tensile testing machine | ||
Structure and principle
1 structure
Rotorless vulcanizer is a kind of intelligent instrument which combines mechanical and electrical principles.
It consists of the following parts:
1.1.1 Mechanical part: shell, upper and lower die, 1.7hz swing mechanism, force sensor;
1.1.2Air control system: composed of open and close mold cylinder, solenoid valve and other components;
1.1.3Electric control system: composed of temperature measuring system and temperature controlling system;
1.1.4Test system: mainly composed of microprocessor, computer control system, data acquisition device, ac, data processor, motor control, report printer.
2 principle
The mold cavity is composed of upper and lower molds. The rubber sample is placed in the closed mold cavity and maintains a certain temperature and pressure. The lower mold cavity vibrates at a frequency of 1.7hz with an amplitude of 0.5 or 1. The vibration of the mold cavity causes the sample to generate shear strain, and at the same time, the sample generates a counterforce (torque) in the opposite direction to the mold cavity. The force value depends on the stiffness of the adhesive (shear modulus). With the beginning of vulcanization, the stiffness of the rubber sample increases, and the reaction force (torque) measured by the force measuring mechanism will gradually rise to the stable value or maximum value and gradually show through the screen, and at the same time to see a curve of the corresponding relationship between torque and time, which is usually called "vulcanization curve". The shape of the curve and the test temperature are related to the properties of the adhesive. (the macarehine has been adjusted and fixed before leaving the factory and no adjustment is required. The amplitude 0.5 meets the rubber test standard)
Technical requirements for data processing
The drawing format, curve and parameters are shown in figure 1 below:
figure 1
Technical specifications and specifications
| 1.1 Standards | GB/T16584-1996, ASTMD5289-95, ISO6502-1999(E) |
| 1.2 Range of temperature | room temperature - 200 ℃ |
| 1.3 Temperature measuring accuracy | 100-200 ℃, plus or minus 0.01 ℃ |
| 1.4 Stability of temperature control | 100-200 ℃, plus or minus 0.1 ℃ |
| 1.5 Set the range | 0-200 ℃; |
| 1.6 Set the smallest unit | 0.1 ℃ |
| 1.7 Temperature display range | 0—200 ℃； |
| 1.8 Display resolution | 0.01℃ |
| 1.9 Set time range | 0—200 mins； |
| Die cavity frequency | 1.7Hz |
| Sway angle | ±0.05 ℃,±1 ℃ |
| 1.10 Display range switch | Automatic increase and decrease according to the actual torque (the sensor range can be customized according to the special requirements of 10n.m) |
| 1.11Torque display accuracy | 0.001N.m |
| 1.12 Power supply | ～220V±10%,50±1Hz,It must be well grounded |
| 1.13 Compressed air | 0.4Mpa, Pneumatic control valve control |
| 1.14 Hunting frequency | Fixed 100 times/min (approx. 1.7hz) |
| 1.15 Environment temperature | normal temperature--40℃, relative humidity＜80%(There is no corrosive gas in the air) |
| 1.16 Mass | ≈160kg |
| 1.17 Power | 0.8KW |
| 1.18 External dimension | 650X650X1100(mm) |
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2013
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Beijing Jinshengxin testing machine Co., Ltd, covering 20,000 square meters, is located in Jinhaihu Town of Beijing. Since founded in 2003, our company has been devoted to the research, development and manufacture of testing machines for metallic and non-metallic materials, especially b... Beijing Jinshengxin testing machine Co., Ltd, covering 20,000 square meters, is located in Jinhaihu Town of Beijing. Since founded in 2003, our company has been devoted to the research, development and manufacture of testing machines for metallic and non-metallic materials, especially b...
Get in touch with us
Leave a Message, we will call you back quickly!