Nordic NRF52832 WIFI Low Power Bluetooth Module CE Certification

Product Specification

BLE Development tool for Nordic 51822/52832 beacon

Model Number: ITBM530

Bluetooth Test Kit ITBM530_52832

General Description:

The nRF51822 Development Kit includes nRF51822 modules that integrate all required external circuitry, including antenna match, 16MHz crystal, and 32.768kHz crystal. When plugged into the nRFgo Motherboard, the device I/O pins are easily accessible via the I/O port headers on the Motherboard. The kit also includes a compact nRF51822 USB dongle that can act as a Bluetooth Smart master emulator when developing Bluetooth Smart applications.

Application:

-nRF51 nRF52 DA14580 Beacon / Module

Features

1. nRFgo-compatible evaluation, prototyping, and firmware development solution for nRF51822 SoC

2. Compact nRF51822 nRFgo module with PCB antennas

3. Compact nRF51822 nRFgo module with SMA connector for use with external antennas or a closed loop set-up

4. Compact nRF51822 USB dongle with on-board Segger J-link debugger

5. Easy access to generic I/O pins with nRFgo Motherboard I/O port headers

R&Q:

• 5.0/4.2/4.0 Bluetooth module contrast difference

Bluetooth has been improved step by step from 4.0-4.2-5.0, bringing more functions. Because the Bluetooth module uses different versions of Bluetooth chips, the functions are different. Createk develops and produces 4.2/5.0 low-power Bluetooth modules. The comparison and differences of 5.0/4.2/4.0 Bluetooth modules are listed below:

5.0 Bluetooth module relative to 4.2 Bluetooth module:

1) The transmission rate is increased by 2 times

Bluetooth 5.0 increases the current transmission speed by 2 times. The maximum communication speed of Bluetooth 4.2 is 1Mbps, and the maximum communication speed of Bluetooth 5.0 is 2Mbps.

2) The transmission distance has been increased by 4 times

The coverage of the Bluetooth 5 standard is 4 times that of Bluetooth 4.2. Improve the accuracy of indoor positioning.

3) The information capacity of the broadcast mode is increased by 8 times

Its broadcast communication capacity has been upgraded from 31Byte of Bluetooth 4.2 to 255Byte. The enhanced broadcasting capability will bring better beacons to create more location-based indoor positioning services and navigation services, and data transmission can be realized without pairing and connection. , The accuracy of indoor positioning is less than 1 meter,

4) Lower power consumption and compatible with older Bluetooth versions

In order to meet the needs of the mobile Internet of Things, its power consumption is lower and it is compatible with the old Bluetooth version.

4.2 The Bluetooth module is relative to the 4.0 Bluetooth module:

1) Faster data transmission

Compared with 4.0, under the Bluetooth 4.2 standard, the data transmission speed between devices is increased by about 2.5 times, and the amount of data that can be accommodated in a Bluetooth smart data packet is about 10 times that of the previous one.

2) Higher security

In addition, the security of Bluetooth 4.2 has also been improved. If the user's permission is not obtained, the Bluetooth signal will not be able to try to connect and track the user's device, and it will not be able to perform intelligent positioning.

3) More powerful functions

On the other hand, the new standard also promotes the introduction of the IPv6 protocol into the Bluetooth standard. Bluetooth 4.2 devices can directly access the Internet through IPv6 and 6LoWPAN, and support low-power IP connections.