KingPo Technology Development Limited
| Payment Terms | T/T |
| Supply Ability | 1000 pcs |
| Delivery Time | goods in stock |
| Packaging Details | safety carton pack or plywood box |
| Standard | UL 310 Table 3(Ninth Edition) |
| Purpose | for Safety for Electrical Quick-Connect Terminals, |
| Brand Name | Kingpo |
| Certification | Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
Temperature - Measuring And Accessibility Probe Material Copper And Rubber
Toy Bite Tester / Biting Force Tester / Simulation Of Children's Teeth / Toy
IEC60335-2-24 Clause 21.102 White Lamp Test Probe For Protection Test On The
Probe For Measurement Of Surface Temperature | IEC 60335-2-9- Figure 105
Product Specification
| Payment Terms | T/T | Supply Ability | 1000 pcs |
| Delivery Time | goods in stock | Packaging Details | safety carton pack or plywood box |
| Standard | UL 310 Table 3(Ninth Edition) | Purpose | for Safety for Electrical Quick-Connect Terminals, |
| Brand Name | Kingpo | Certification | Calibration Certificate |
| Place of Origin | China | ||
| High Light | articulated finger probe ，jointed test finger | ||
5.2.2.1 Test tabs for the insertion-withdrawal test described in Clause 6.4 shall be made of unplated brass, identified as CDA C26000 Alloy with a hardness of 62 ±7 on the Rockwell 30T scale.
5.2.2.2 Test tabs for the temperature and current cycling tests described in Clause 6.5 shall be made of tin-plated steel or corrosion resistant steel having a hardness of 68 ±5 on the Rockwell 30T scale.
5.2.2.3 In regard to Clause 5.2.2.2, for connectors intended exclusively for use with production tabs of copper alloy, an unplated brass test tab of C26000 Alloy with a hardness of 62 ±7 on the Rockwell 30T scale may be used.
5.3.3.1 Single-ended test tabs for the insertion-withdrawal test shall have the configuration shown in Figures 2 to 4 and the dimensions specified in Tables 2 and 3. The "C" dimension tolerance shall be ±0.008 mm (0.0003 in) for brass and ±0.013 mm (0.0005 in) for steel, and raised plateaus around the detent shall be limited to a combined total of 0.03 mm (0.001 in) for both sides.
5.3.3.2 Double-ended test tabs for the temperature and current cycling tests shall be constructed in accordance with Clause 5.3.3.1 and have the configuration shown in Figure 5.
(See note to Figure 5)
| Nominal size | A | B(min) | C | D | E | F | J | M | N | P | Q(min) |
| 2.8 x 0.5 with dimple | 0.6 | 7.0 | 0.54 | 2.90 | 1.8 | 1.3 | 12° | 1.7 | 1.4 | 1.4 | 8.1 |
| 0.3 | 0.47 | 2.70 | 1.3 | 1.1 | 8° | 1.4 | 1.0 | 0.3 | |||
| 2.8 x 0.5 with hole | 0.6 | 7.0 | 0.54 | 2.90 | 1.8 | 1.3 | 12° | 1.4 | 8.1 | ||
| 0.3 | 0.47 | 2.70 | 1.3 | 1.1 | 8° | 0.3 | |||||
| 2.8 x 0.8 with dimple | 0.6 | 7.0 | 0.84 | 2.90 | 1.8 | 1.3 | 12° | 1.7 | 1.4 | 1.4 | 8.1 |
| 0.3 | 0.77 | 2.70 | 1.3 | 1.1 | 8° | 1.4 | 1.0 | 0.3 | |||
| 2.8 x 0.8 with hole | 0.6 | 7.0 | 0.84 | 2.90 | 1.8 | 1.3 | 12° | 1.4 | 8.1 | ||
| 0.3 | 0.77 | 2.70 | 1.3 | 1.1 | 8° | 0.3 | |||||
| 3.2 x 0.8 with dimple | 0.6 | 7.0 | 0.84 | 3.25 | 1.8 | 1.3 | 12° | 1.7 | 1.4 | 1.4 | 8.1 |
| 0.3 | 0.79 | 3.10 | 1.4 | 1.1 | 8° | 1.4 | 1.1 | 0.3 | |||
| 3.2 x 0.8 with hole | 0.6 | 7.0 | 0.84 | 3.25 | 1.8 | 1.3 | 12° | 1.4 | 8.1 | ||
| 0.3 | 0.79 | 3.10 | 1.4 | 1.1 | 8° | 0.3 | |||||
| 3.2 x 0.5 with dimple | 0.6 | 7.0 | 0.54 | 3.25 | 1.8 | 1.3 | 12° | 1.7 | 1.4 | 1.4 | 8.1 |
| 0.3 | 0.48 | 3.10 | 1.4 | 1.1 | 8° | 1.4 | 1.1 | 0.3 | |||
| 3.2 x 0.5 with hole | 0.6 | 7.0 | 0.54 | 3.25 | 1.8 | 1.3 | 12° | 1.4 | 8.1 | ||
| 0.3 | 0.48 | 3.10 | 1.4 | 1.1 | 8° | 0.3 | |||||
| 4.8 x 0.5 with dimple | 0.9 | 6.2 | 0.54 | 4.80 | 2.8 | 1.5 | 12° | 1.7 | 1.5 | 1.7 | 7.3 |
| 0.6 | 0.47 | 4.60 | 2.3 | 1.3 | 8° | 1.4 | 1.2 | 0.6 | |||
| 4.8 x 0.5 with hole | 0.9 | 6.2 | 0.54 | 4.90 | 3.4 | 1.5 | 12° | 1.7 | 7.3 | ||
| 0.6 | 0.47 | 4.67 | 3.0 | 1.3 | 8° | 0.6 | |||||
| 4.8 x 0.8 with dimple | 1.0 | 6.2 | 0.84 | 4.80 | 2.8 | 1.5 | 12° | 1.7 | 1.5 | 1.8 | 7.3 |
| 0.7 | 0.77 | 4.60 | 2.3 | 1.3 | 8° | 1.4 | 1.2 | 0.7 | |||
| 4.8 x 0.8 with hole | 1.0 | 6.2 | 0.84 | 4.90 | 3.4 | 1.5 | 12° | 1.8 | 7.3 | ||
| 0.6 | 0.77 | 4.67 | 3.0 | 1.3 | 8° | 0.7 | |||||
| 5.2 x 0.5 with dimple | 1.0 | 6.2 | 0.54 | 5.30 | 2.8 | 1.9 | 12° | 2.5 | 2.0 | 1.7 | 7.3 |
| 0.7 | 0.47 | 5.10 | 2.3 | 1.6 | 8° | 2.2 | 1.8 | 0.6 | |||
| 5.2 x 0.5 with hole | 1.0 | 6.2 | 0.54 | 5.30 | 3.4 | 1.9 | 12° | 1.7 | 7.3 | ||
| 0.7 | 0.47 | 5.10 | 3.0 | 1.6 | 8° | 0.6 | |||||
| 5.2 x 0.8 with dimple | 1.0 | 6.2 | 0.84 | 5.30 | 2.8 | 1.9 | 12° | 2.5 | 2.0 | 1.8 | 7.3 |
| 0.7 | 0.77 | 5.10 | 2.3 | 1.6 | 8° | 2.2 | 1.8 | 0.7 | |||
| 5.2 x 0.8 with hole | 1.0 | 6.2 | 0.84 | 5.30 | 3.4 | 1.9 | 12° | 1.8 | 7.3 | ||
| 0.7 | 0.77 | 5.10 | 3.0 | 1.6 | 8° | 0.7 | |||||
| 6.3 x 0.8 with dimple | 1.0 | 7.8 | 0.84 | 6.40 | 4.1 | 2.0 | 12° | 2.5 | 2.0 | 1.8 | 8.9 |
| 0.7 | 0.77 | 6.20 | 3.6 | 1.6 | 8° | 2.2 | 1.8 | 0.7 | |||
| 6.3 x 0.8 with hole | 1.0 | 7.8 | 0.84 | 6.40 | 4.7 | 2.0 | 12° | 1.8 | 8.9 | ||
| 0.5 | 0.77 | 6.20 | 4.3 | 1.6 | 8° | 0.7 | |||||
| Notes: 1. Included are dimensions for those nominal sizes corresponding with those found in IEC 61210. 2. In the table where two values are provided, the lesser value is the minimum permitted value and the larger is the maximum permitted value. | |||||||||||
Note 1 - For dimple and hole detent dimensions F, G, M, and N, see Figures 3 and 4.
Note 2 - Bevel "H" need not be a straight line if it is within the confines shown, and it may be a radius of "P".
Note 3 - "Q" dimension is for tabs without shoulders.
Note 4 - "L" dimension not specified.
Note: See Figures 2 to 4 and Table 2 or 3.
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
50~200
Ecer Certification：
Verified Supplier
Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos... Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos...
Get in touch with us
Leave a Message, we will call you back quickly!