KingPo Technology Development Limited
| Payment Terms | T/T |
| Supply Ability | 25 per month |
| Delivery Time | 25 |
| Packaging Details | satety plastic tool box or plywood package. |
| Standard | IEC 60695-10-2:2014 |
| ball diameter | 5mm (R2.5mm) |
| Application | heat testing in household and similar plug sockets |
| Test pressure | 20N ± 0.2N |
| material | stainless steel |
| Test Stand | 100mm (height) x 50mm (diameter) |
| Brand Name | KingPo |
| Model Number | KP-BP10 |
| Certification | Calibration certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
Durable Combustion Testing Equipment Copper Block IEC 60695-11-4 Figure 1 IEC
IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault
Burner Flame Test Equipment IEC 60695-11-4 Figure A.1 Calibration Certificate |
Durable Combustion Testing Equipment Copper Block IEC 60695-11-4 Figure 1
Product Specification
| Payment Terms | T/T | Supply Ability | 25 per month |
| Delivery Time | 25 | Packaging Details | satety plastic tool box or plywood package. |
| Standard | IEC 60695-10-2:2014 | ball diameter | 5mm (R2.5mm) |
| Application | heat testing in household and similar plug sockets | Test pressure | 20N ± 0.2N |
| material | stainless steel | Test Stand | 100mm (height) x 50mm (diameter) |
| Brand Name | KingPo | Model Number | KP-BP10 |
| Certification | Calibration certificate | Place of Origin | China |
| High Light | IEC 60695-10-2 Ball Pressure Tester ，R2.5mm Ball Pressure Tester ，20N ball pressure test apparatus | ||
Ball Pressure Tester , IEC 60695-10-2 Abnormal Heat – Ball Pressure Test Method
IEC 60695-10-2:2014 Ball Pressure Tester With Test Specimen Support / Hot Deformation Capacity Tester
Description
This Ball Pressure Tester applicable to assessment of heat-resistant fro all insulation materials of electrical enclosure, external components and plastic. Trial is that the sample placed on the platform of inside constant temperature under 125±2Degree, coupled with the ball-side of tester suppressing the specimen, remove the specimen and put into the cold water for 10 seconds after 1 hour, and then measuring Sag values, indentation of ball diameter shall not exceed 2mm.
Main features:
Adopts steel materials, nickel plating has excellent heat-resistant
Responding to handle the bow with installation and threaded holes
Responding to the pressure precision ball (according to 5mm ISO3290)
Adopts thermocouple test
Applicable Industry:
electrical and electronic equipment, components and partsCeramics and other solid insulation materials
Standard:
Meet the IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.
GB 2099.1, GB4706.1
Technical parameters:
Model: KP-BP10
Ball Diameter:5mm
Pressure: 20N (including loading and unloading equipment and ball)
Ball Pressure Diameter: R = 2.5mm
Test Stand: 100mm (high) x 50mm (diameter)
The test specimen support shall be such that
1. it rigidly supports the test specimen in a horizontal position.
2. It has sufficientstrength to support the loading device.
3. It has a smooth flat surface.
4. It has sufficiently large mass to prevent a significant reduction in temperature of the apparatus during the installation and removal of the test specimen from the heating oven.
NOTE It has been found useful to mount a separate thermocouple in the certer of the test specimen support approximately 3mm below the surface to check that the temperature of the test specimen support does not significantly deviate from the test temperature.
8.2 Heating oven and test apparatus setup
Conduct the test method in air,in a heating oven(see 5.3) at a temperature specified in the relavant specification(within a tolerance of ±2℃) measured within 50mm of the approximate center of the test specimen.The test specimen support and loading device shall be preheated at the test temperature for a minimum of 3h
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
50~200
Ecer Certification：
Verified Supplier
Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos... Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos...
Get in touch with us
Leave a Message, we will call you back quickly!