IEC60529 / IS020653 IPX9K Water Spray Tester For Road Vehicle

Product Specification

IEC60529 / IS020653 IPX9K Water Spray Tester Road Vehicle IP Waterproof Test Device

I. Overview of functions.

The equipment conforms to DIN40050-9 road vehicle IP waterproof code, GB4208-2017, IEC60529-2013, IS020653:2006, road vehicle IP waterproof code standard, the main use is the road vehicle electrical components IPX9K waterproof test, simulation of natural environment or artificial high-pressure car wash designed for waterproof test equipment. The water pump adopts Italian imported high pressure high temperature plunger pump, the motor adopts three phase asynchronous motor, the pump in and out of the pipe are connected with high pressure hose, the water tank is designed for 70L, according to the test requirements, a cycle of 120S, in the case of not circulating water to ensure the water supply.

II. Technical parameters.

1. Test water temperature: 80±5 °C.

2,Nozzle specification: according to standard IEC60529-Figure 7, brand: kingpo, material 304 stainless steel

All dimensions are manufactured in strict accordance with standard requirements: R1.5±0.005mm, R0.75±0.01mm, 8±0.01mm,9.69±0.01mm,

9.6±0.1mm,1.25±±0.1mm,φ3±0.01mm,60°±1°,2.34±0.06mm,1.33±0.04mm

Clear nozzle profile

Qualified nozzle profile

Example of a non-conforming profile.

3. Nozzle angles: (0°, 30°, 60°, 90°).

​

4. Water spray pressure: 8MPa - 10MPa (adjustable).

5. Water impact calibration device

Impact plate 2mm*30mm

Impact force 0.9~1.2 N

1. Water spray flow: 14L/min - 16L/min (adjustable).
2. Water spray distance: 100 to 150 mm adjustable.
3. Test bench size: ￠400mm.
4. Specimen table speed: 4 - 6 r/min.
5. Specimen table load: 100 kg.
6. Test product energized to work: test product interface provided; pressure 30A.

11, water pump: Italy imported high pressure high temperature water pump, control valve using high temperature high pressure piston valve control each nozzle work, electronic pressure sensor output pressure value, turbine flow meter output flow value, water flow through the frequency converter control booster pump speed to achieve the required water flow, change the frequency can reach different water flow also pressure, to achieve automatic control.

12, nozzle made of SUS/304, rail operation for easy adjustment.

13,Control: each nozzle works 30S, 4 angles work 120S in total, control the speed of booster pump by changing the frequency of inverter to achieve the set flow and pressure, all data are converted to the control panel through the transmitter for display.

13.1 Display: 7" color touch screen

13.2 Setting method: Chinese menu, touch screen input

13.3 Mode of operation: cyclic operation, continuous operation

13.4 Display functions: display of pressure, flow rate, temperature, test time, etc..

13.5 Protection functions: earth leakage protection, overload protection, short circuit protection, door opening operation protection.

14. Water tank capacity: 70L.

15. Power supply of the equipment: AC 380V, 50HZ, power 25KW.

16,Exterior dimensions (length, width and height): 1850X1100X1950mm

17,Inner hollow size (length, width and height): 1100X800X1000mm