Product Specification

10000A Battery Tab Spot Welding Machine Foot-Type Spot Welding Machine

● Adopting the self-developed precision welding head, the pressure adjustment control is accurate.

● The bipolar output eliminates the welding polarity effect and makes the energy on both sides of the welding rod consistent, which can effectively eliminate the sticky needle phenomenon.

● In bipolar output, the welding voltage/current flows from the left pin to the right pin for the first weld and the welding energy flows from the right pin to the left pin for the second weld.

● Can be used for both bump and tip welding.

● Three control modes are available: constant current, constant voltage, and a combination of constant current and constant voltage.

● The built-in pre-test function can be used to determine whether the workpiece is energized before welding.

● Lithium battery spot welding machine has fast and efficient switching of welding current through transistors, no transformer required.

● No need for a welding transformer, small size, light weight and beautiful.

● The welding power supply is controlled by a switching method, enabling small but efficient welding and high output.

● The power supply has a fast rise in welding current, enabling high quality welding in a short time.

● Added continuous spot welding function to effectively improve production efficiency.

● Independently developed precision welding head with precise pressure adjustment control.

● Controlled by microcomputer technology, it can monitor the welding current, voltage, power and resistance waveform dynamically in real time.

● 5.7" HD LED Display for easy and intuitive adjustment of equipment parameters, and multiple programs can be stored in advance.

● Thicker explosion-proof glass protects the table from wear and tear when welding, ensuring smooth welding.

● Welding is done by vertical spot welding with manual control of press-in depth.

 1.Pneumatic precision welding head 

Horizontal welding structure, double linear guide design, left and right pressure can be adjusted separately. Built-in pressure sensor, precise control to apply stable pressure.

 2.Pure copper cable 
Coarse pure copper cable, low wire resistance, large bearing capacity, thick enough, no thermal current lossless transfer to the welding head to ensure the welding current.

 3.Cylinder drive 

The air source interface is connected to the pressure regulator to adjust the air source pressure and filter the water. The gas is sent to the solenoid valve, which controls the gas drive cylinder and drives the welding head.

Power on - display 600 OE self-test screen - press the up arrow to enter the system - Place the product to be welded on the table - pedal -

press the welding head - spot welding completed - welding head return

Q: What's your minimum order quantity?

A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.

Q: How do I install and run the machine?

A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.

Q: I don't know which one is right for me?

A: Please tell us the following information

1) Battery model and type.

2) Welding material and welding thickness

3) Commercial industry: We have a lot of sales experience and can provide you with advice.

Q: How does your factory do in terms of quality control?

A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.

Q: How can I do if the machine goes wrong?

A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.

Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.

Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!