Product Specification

Hand Welding Battery Tab Spot Welding Machine Pressure Adjustable

● Cheebo lithium battery spot welding machine adopts self-developed precision welding head, pressure precise adjustment and control.

● CBLQ-5A battery nickel welding machine does not require welding transformer, small size, light weight and beautiful appearance.

● It can be applied to bump spot welding and needle spot welding.

● 18650 battery spot welding machine has three control modes: constant current, constant voltage, constant current and constant voltage combination mode.

● Built-in pre-check function, which can be used to determine whether the workpiece is energized before welding.

● The welding current of lithium battery spot welding machine can be switched quickly and efficiently through transistors without transformer.

● The welding power supply is controlled by switching mode, which can realize small but efficient welding and high output.

● The power supply welding current rises quickly, and high-quality welding is realized in a short time.

● The lithium-ion battery pack spot welding machine increases the connection point function and effectively improves production efficiency.

● Independent research and development of precision welding head, precise pressure adjustment control.

● Microcomputer technology control, dynamic real-time monitoring of welding current, voltage, power and resistance waveforms.

● 5.7 inch high-definition LED display, convenient and intuitive adjustment of equipment parameters, can store multiple programs in advance.

● There are three welding methods: constant voltage, constant current and constant voltage current combination.

1. Welding case

 1. Pneumatic precision welding head 

Horizontal welding structure, double linear guide design, left and right pressure can be adjusted separately. Built-in pressure sensor, precise control to apply stable pressure.

 2. Thickened tempered glass 
High quality explosion-proof glass is used to effectively prevent the damage caused to the desktop during welding. At the same time, it can increase the fluency of welding and increase the welding efficiency.

 3. Adjusting mechanism of welding head 

The welding head can be adjusted up and down to increase the distance between the desktop and the welding head. Can weld a variety of different heights, different types of cells.

4. Cylinder drive

The air source interface is connected to the pressure regulator to adjust the air source pressure and filter the water. The gas is sent to the solenoid valve, which controls the gas drive cylinder and drives the welding head.

Power on -- check whether the WELED switch is turned on -- place the product to be welded on the desktop -- Step on the foot pedal -- push down

the welding head -- spot welding completed -- return the welding head

1. Welding case

Q: What's your minimum order quantity?

A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.

Q: How do I install and run the machine?

A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.

Q: I don't know which one is right for me?

A: Please tell us the following information

1) Battery model and type.

2) Welding material and welding thickness

3) Commercial industry: We have a lot of sales experience and can provide you with advice.

Q: How does your factory do in terms of quality control?

A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.

Q: How can I do if the machine goes wrong?

A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.

Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.

Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!