1.75m 1.5kw HDG Poultry Manure Removal System For Battery Cage

Product Specification

                            Poultry Farm Manure Cleaning Equipment

                                  Remove System For Chicken Cage

Manure Cleaning Equipment Remove System Information

Belt type manure cleaning remove equipment is mainly composed of motor acceleration facilities, chain transmission, main and voluntary rollers, and manure bearing belts. It is actually used in multi-layer H frame chicken caged poultry houses. Poultry litter collecting machine is equipped with a manure bearing plate on each layer of chicken cages. When the machine starts, the motor and accelerator move the active rollers of each layer through the chain to work. Friction is generated from the lower part, and the moving manure-carrying cage group moves in the length direction to transport the chicken manure to one end, which is scraped off by the manure scraper set at the end, and then the manure removal work is finished.

Poultry Farm Manure Cleaning Remove Equipment Advantages

1. Manure conveyor belt for poultry dung remover is a thickened PP material, which has strong corrosion resistance, strong environmental adaptability and long life. Moreover, the wear rate of the belt is very low when c manure, and it can be used for ten to twenty years, which can carry heavy objects, generally one square can carry the limit of 5000N force.

2. The conveyor belt manure cleaning motor produced by our company uses a cycloid reducer, and the multi-layers can be equipped with a straight gear reducer.

3. High-carbon steel is used for the scraping mouth, and some use high-thickness galvanized steel, which can withstand objects harder than itself without deformation, and the scraper is well-made.

4. High working efficiency, chicken manure can be automatically transfered out timely, avoiding overnight chicken manure infection, preventing the occurrence of infectious diseases, automatic loading, and the height of chicken manure can be automatically adjusted according to the situation.

Manure Cleaning Remove System Technical Parameter

Installation Precautions

1. It is required that the chicken house must be hardened, the ground is flat, there is no convexity and concave place, the slope control should not exceed 2 degrees up and down. The excrement should be 5-10 degrees lower on the other side. So that the water can be drained smoothly.

2. Place the cages straight and adjust the foot adjuster so that the height deviation between the two cages should not exceed 0.5 mm, and the distance between the legs should not exceed 0.5 mm.

3. Main engine should be firmly fixed, also the head and tailstock should be firmly fixed to the ground without loosening.

4. Install manure belt or scraper, and check whether the manure belt and the manure baffle are suitable.

5. The electrician installs the wiring and control line, and finds the position of the travel switch, and fixes it firmly;

6. The controller must contain a leakage protection device;

7. The test running is performed by a person on the control panel in a jog mode, and multiple persons should cooperate to ensure that there are no scratches, jams, deflection, etc. in the equipment. If problems are found, find out the reasons and solve them in time. Start and run when it is confirmed that there is no error;

8. If the operation is stable, the manure removal is uniform and there is no too much noise (less than 40 decibels). There is not much jitter. That is qualified.