Shenzhen XUWEN Technology Co.,Ltd
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 100000pcs/month |
| Delivery Time | To be negotiated |
| Packaging Details | Packed in export carton Box |
| Type: | 14s bms 30A |
| Communication: | UART,blue tooth |
| Size: | 144x62x10mm |
| Usage: | li-ion Battery Pack |
| port: | charge and discharge same port |
| weight: | 1.5kg |
| Brand Name | XUWEN |
| Model Number | 485 232 GPRS 14s 48v 30A 3.7V Ev BMS |
| Certification | CE,FCC,RoHS,UN38.3,MSDS |
| Place of Origin | China |
View Detail Information
Explore similar products
6S LiFePO4 Smart BMS System 100A 150A CAN RS485 UART Communication For Car
Smart Battery Protection Board , BMS with balancer 17S-24S 80A With BT UART 60V
Active Balance Smart BMS System 12S-20S 60A For Li Ion Lifepo4 LTO Battery Pack
4s 12V 3.7V Smart BMS System with UART 485 CAN Communication
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 100000pcs/month |
| Delivery Time | To be negotiated | Packaging Details | Packed in export carton Box |
| Type: | 14s bms 30A | Communication: | UART,blue tooth |
| Size: | 144x62x10mm | Usage: | li-ion Battery Pack |
| port: | charge and discharge same port | weight: | 1.5kg |
| Brand Name | XUWEN | Model Number | 485 232 GPRS 14s 48v 30A 3.7V Ev BMS |
| Certification | CE,FCC,RoHS,UN38.3,MSDS | Place of Origin | China |
| High Light | 485 Wireless Battery Management System ，232 UART Wireless Battery Management System ，GPRS Lifepo4 Battery Management System | ||
BT Smart BMS System Battery Management Wireless UART 485 232 GPRS 14s 48v 30A 3.7V Ev BMS
RFQ
1.What is the common port and separate port? what is the difference?
We take 13S 48V 15A BMS as an example, common port 15A means your charge cathode and discharge cathode are connected in the same point end(our P-), charge cathode and discharge cathode are used in the common connection
port, so the charge current and discharge current are the same 15A. while the separate port is separately connected by charge cathode (C-) and discharge cathode (P-), so the charge current and discharge current are different, discharge current 15A, charge current 8A.
2.What is the balance function?
The working principle and function are as followings, when your one cell voltage is upto alarm voltage(Li-ion upto 4.18V, LifePo4 upto (3.6V), then the cell Balance starts to work, balance resistance starts discharge with 35ma(when balance discharge starts to work, BMS will starts a little heat up, which is the normal reflection), the cell is in both charging and discharging status, and others which are not reached to alarm voltage(Li-ion 4.18V, LifePo4 3.6V)are only in charging status, no discharging, when the fast cell voltage is reached to alarm voltage (Li-ion 4.25V, LifePo4 3.75V) BMS starts off power protection, all the other cells are all in stop of charging, this process will enable your battery charging in balance current, and your battery voltage are in balance status, but when your cell voltage difference are in a big range, then balance can not be functionning well
3.The relationship between Battery capacity and BMS current?
There is no direct relationship between Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say if your engine is powerful, your should choose high current of BMS, it is not relied on battery capacity.
4. What type of charger should I choose?
Lithium battery must choose specific charger, do not use Charger for Leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge. Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X4.2V.
5. What current BMS should I choose ?
Take 10S 36V as an example: what current BMS you choose is relied on your E-bicycle Motor power and current limitation of controller. eg., choose 15A for below 350W, 20A for below 500W, 30A for below 800W, 60A for Below 1000W, higher than 1200W are contact with our service specialist for suggestions, one inall, continue current shall be higher than current limitation in Controller.
6. Whether my BMS damaged?
if you want to judge if the BMS is damaged, please take the folowing steps, to test if each cell voltage is the same with
voltmeter? if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the
start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displyed as no charge, no discharge, no discharge while the battery has voltage.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2003
Total Annual:
4000000-5000000
Employee Number:
100~300
Ecer Certification：
Active Member
Shenzhen XUWEN Technology Co.,Ltd is a comprehensive technology company specializing in the research, development, production and sales of various lithium-ion battery packs, lithium battery protection management systems, lithium battery testing equipment . Specializing in the production of power, en... Shenzhen XUWEN Technology Co.,Ltd is a comprehensive technology company specializing in the research, development, production and sales of various lithium-ion battery packs, lithium battery protection management systems, lithium battery testing equipment . Specializing in the production of power, en...
Get in touch with us
Leave a Message, we will call you back quickly!