Neware Technology Limited
| Payment Terms | T/T |
| Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days |
| Packaging Details | Wooden Box , W - D - H , 600 - 800 - 1300 mm |
| Voltage | 3V - 100V |
| Current | 1.0A - 200A |
| Input power | 47.1 KW |
| Input current | 71.5A per single |
| Power control module | MOSFET |
| Overall system efficiency ( Max ) | 90 percent |
| Brand Name | Neware |
| Model Number | CE-6002n-100V200A-H |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
IP20 EV Battery Testing Equipment , 500V 200A Car Battery Discharge Tester
IP20 2 Channel Electric Vehicle Battery Tester 5V - 300V
60V100A Li Ion Car Battery Discharge Tester Single CPU Control
IP20 2 Channel Electric Vehicle Battery Tester 5V - 300V
Product Specification
| Payment Terms | T/T | Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days | Packaging Details | Wooden Box , W - D - H , 600 - 800 - 1300 mm |
| Voltage | 3V - 100V | Current | 1.0A - 200A |
| Input power | 47.1 KW | Input current | 71.5A per single |
| Power control module | MOSFET | Overall system efficiency ( Max ) | 90 percent |
| Brand Name | Neware | Model Number | CE-6002n-100V200A-H |
| Certification | CE | Place of Origin | China |
| High Light | 100V 200A EV Battery Testing Equipment ，MOSFET EV Battery Testing Equipment ，100V 200A Electric Vehicle Battery Tester | ||
EV Battery Testing Solutions 100V200A Automotive Electric Vehicle and Battery Test
Introduction:
A. Power battery simulation , C - rate test .
B. Life cycle test.
C. Power test , capacity test , energy density test.
D. Power battery virtual distribution : charge / discharge curve fitting , battery consistency test and evaluation.
E. High rate charge / discharge test .
F. Power battery , serial energy - storage battery module test : single cell voltage , Single cell temperature monitoring ( high - voltage equipment ).
Features(some features required a customization):
A. High-performance charge/discharge test platform developed for high-power battery modules(or packages).
B. Adopting AC/DC,DC/DC Dual-level high frequency module design, combined with low temperature drift, high-performance C. multi-channel 24-bit analog-to-digital conversion chip(ADC) to achieve higher stabilize accuracy.
D. High-level power density system with multi-channel integration and capable for energy recovering.
E. HMI operation, smart calibration.
F. Multiple adaption for BMS, supports the same/different charge and discharge ports, relay/MOSBMS solution, independent CAN and RS485 communication expansion, and DBC configuration.
G. Remote control available for host computer through Ethernet, channels parallel, pulse and driving simulation available.
H. Man-computer integration interface design, minimized system for easy-understand operating, customized setting available, automatic reminder for termly calibration.
| Charge | Charge modes | Constant current , Constant voltage , Constant current and voltage , Constant power | |
| Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity , - delta V | ||
| Discharge | Discharge modes | Constant current , Constant voltage , Constant power , Constant resistance | |
| Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity | ||
| Pulse | Charge | Constant current , Constant power |
| Discharge | Constant current , Constant power | |
| Min pulse width | 100ms | |
| Pulse counts | Each pulse step supports 32 different pulses | |
| Chg and Dschg switch | Supported | |
| Cut-off condition | Voltage, Time | |
| Simulated Condition | Charge mode | Constant current , Constant power |
| Discharge modes | Constant current , Constant power | |
| Cut-off condition | Time , Line Number | |
| Continuous switching Chg and Dischg | One simulation step can realize a continuous switching from charging to discharging | |
| Limit step number | 1 million | |
| Cycle | Max cycles | 65535 |
| Max steps | 254 | |
| Cycle nest | Nested loop Function,Max Support 3 Layers | |
| Charge and discharge efficifency | more than 90 percent | |
| Protection | Anti - surge , anti - islanding , over - under - frequency , over - under - voltage , phase - loss protection , etc . | |
| Protection grade | IP20 | |
Channel parallel | Supported , parallel channels do not support pulse and simulation testing | |
| Energy feedback | The discharge energy can be fed back to the power grid | |
| Channels feature | Constant Current Source and Constant Voltage Source with Independent pairs of Closed - loop Structure |
| Channels control mode | Independent control |
| Noise | less than 65dB |
| Database | MySQL |
| Communication | TCP / IP |
| Operating system | Windows 7 / 10 64bit |
| Data export | EXCEL , TXT |
| Min. disk drive | 500GB |
| Communication port | Ethernet port |
| Communication port | CAN communication module support the communication with BMS to obtain the single voltage and temperature in BMS |
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
250000000-350000000.00
Employee Number:
350~500
Ecer Certification：
Active Member
Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ... Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ...
Get in touch with us
Leave a Message, we will call you back quickly!