Neware Technology Limited
| Payment Terms | T/T |
| Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days |
| Packaging Details | Wooden Box , W - D - H , 1400 - 800 - 1800 mm |
| Voltage Range | 50V - 500V |
| Current Range | 1.5A - 300A |
| Accuracy | Positive and negative 0.05 percent of FS |
| Stability | Positive and negative 0.1 percent of FS |
| Max cycles | 65535 |
| Max steps | 254 |
| Brand Name | Neware |
| Model Number | CTE-6001n-500V300A-IG |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
100V 200A Regenerative Battery Pack Test System
60V60A Channel Parallel Regenerative Battery Pack Test System CE Listed
24bit Electric Crane 60V 200A Regenerative Battery Pack Test System
Neware 200V100A Li Ion Regenerative Battery Pack Test System Current Voltage
Product Specification
| Payment Terms | T/T | Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days | Packaging Details | Wooden Box , W - D - H , 1400 - 800 - 1800 mm |
| Voltage Range | 50V - 500V | Current Range | 1.5A - 300A |
| Accuracy | Positive and negative 0.05 percent of FS | Stability | Positive and negative 0.1 percent of FS |
| Max cycles | 65535 | Max steps | 254 |
| Brand Name | Neware | Model Number | CTE-6001n-500V300A-IG |
| Certification | CE | Place of Origin | China |
| High Light | 500V battery cell test equipment ，Energy Feedback battery cell test equipment ，300A high rate discharge cell tester | ||
Neware 500V300A Regenerative Battery Pack Tester with Energy Feedback Function
CE - 6000 series regenerative battery module pack tester designed for secondary battery charge / discharge test , specialized in testing high power module / pack battery. It has a high dynamic response speed , high accuracy. Also, the regenerative function is included to greatly reduce power consumption during the discharge test .
Function features - some functions need to be customized
1 . A high performance charge and discharge detection platform for high power density battery modules packages .
2 . Using AC / DC , DC / DC two - stage high frequency isolation modular design , combined with low temperature drift , high performance multi - channel 24 bit .
The steady - state accuracy of ADC is higher than that of traditional equipment .
3 . The system has high power density , multi - channel integration and energy recovery function.
4 . HMI operation , one key intelligent automatic calibration .
5 . Multiple BMS adaptability , support charge / discharge same / different port, support relay / mosbms scheme . Support independent can and RS485 communication expansion . Support DBC configuration function .
6 . The remote control of upper computer is realized through Ethernet , which can realize parallel channel , support pulse and condition simulation .
7 . The design of human - computer interaction interface makes the system function simple and easy to operate . Support multiple custom settings . With regular calibration automatic reminder service .
| Pulse | Charge | Constant current , Constant power |
| Discharge | Constant current , Constant power | |
| Min pulse width | 100ms | |
| Pulse counts | Each pulse step supports 32 different pulses | |
| Chg and Dschg switch | Supported | |
| Cut - off condition | Voltage , Time | |
| Simulated Condition | Charge modes | Constant current , Constant power |
| Discharge modes | Constant current , Constant power | |
| Cut - off condition | Time , Line Number | |
| Continuous switching Chg and Dischg | One simulation step can realize a continuous switching from charging to discharging | |
| Limit step number | 1 million | |
| Cycle | Max cycles | 65535 |
| Max steps | 254 | |
| Cycle nest | Nested loop Function , Max Support 3 Layers | |
| Protection | Anti - surge , anti - islanding , over - under - frequency , over - under - voltage , phase - loss protection , etc. | |
| Protection grade | IP20 | |
| Channel parallel | supported , Parallel channels do not support pulse and simulation testing | |
| Energy feedback | The discharge energy can be fed back to the power grid | |
| Channels feature | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
| Channels control mode | Independent control |
| Noise | ≤65dB |
| Database | MySQL |
| Communication | TCP/IP |
| Operating system | Windows 7/8/10 64bit |
| Data export | EXCEL, TXT |
| Min. disk drive | 500GB |
| Communication port | Ethernet port |
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
250000000-350000000.00
Employee Number:
350~500
Ecer Certification：
Active Member
Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ... Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ...
Get in touch with us
Leave a Message, we will call you back quickly!