Wu Han Micro Control Electric Co., Ltd.
| Payment Terms | T/T, L/C, Western Union |
| Supply Ability | 10000 UNITS/MONTH |
| Delivery Time | 1~3 days |
| Packaging Details | Neutral |
| Brand | True Engin |
| Model | STA-05B |
| Certificate | ISO9001 |
| Warranty | 2 years |
| Size | 115*100*23mm |
| Weight | 0.3 kg |
| Brand Name | True Engin |
| Model Number | STA-05B |
| Certification | ISO9001 |
| Place of Origin | China,Hubei |
View Detail Information
Explore similar products
DC24V Power Tension Loadcell Amplifier Light Weight 115*100*23mm Size Tension
Output DC 5V Intelligent Tension Amplifier Transducer For Tension System For
Powerful Strain Amplifier With Tension Load Cell For Slitting Machine Tension
Measuring Load Cell Signal Amplifier DC 24V Low Temperature Drift For Face Mask
Product Specification
| Payment Terms | T/T, L/C, Western Union | Supply Ability | 10000 UNITS/MONTH |
| Delivery Time | 1~3 days | Packaging Details | Neutral |
| Brand | True Engin | Model | STA-05B |
| Certificate | ISO9001 | Warranty | 2 years |
| Size | 115*100*23mm | Weight | 0.3 kg |
| Brand Name | True Engin | Model Number | STA-05B |
| Certification | ISO9001 | Place of Origin | China,Hubei |
| High Light | load cell signal amplifier ，load cell amplifier | ||
Measurement Tension Amplifier Work With Tension LoadCell for Packing Machine
Measuring amplifiers ensure a stable bridge supply voltage, They amplify the output signal of the load sensors to a standard signal .
1. Preface
Tension transducer STA - 05 is the tension of Intelli gent tension transducer instrument . By using of key operation will complete zero alignment,calibration,convert the left or right tension sensor signal into astan dard industrial control signals, 0 ~ 10V / 0 ~ 5V and 0 ~ 20 mA output signal can be provided to PLC for automatic control .
2. Features
1. 32 bit CPU guarantees high speed, precision, ant-ijamming capability and ensures reliability.
2. The outside has no adjustable potentiometer.
3. The tension sensor can select Differential sensor or Strain- gauge sensor.
4. 0~ 10V/ 0~ 5V and 0~ 20mA output signals can be p-rovided to PLC and display instrument.
5. Use dispensing technology, small volume, light wei-ght.
6. Using DIN rail mounting, simple and convenient.
| Parameters | ||
| Model | STA-05C | STA-05B |
| Power Supply | DC 24V | |
| Input Analog singal | L+~L-;R+~R-;Left,right STS tension loadcell signal (0~200mv,power supply DC5V) | L+~L-;R+~R-;Left,right STSA tension loadcell signal (0~15mv;power supply DC5v) |
| Control output | 1.Vout-GND:DC0~10V/0~5V 2.Iout-GND:DC0~20mA | |
| Fixed output | 5V+-GND:DC5V tension loadcell power supply | |
| Outline size | 115x100x23mm | |
| er supply. | |||||
| 2 | 24V - : Negative terminal of tension transducer po - | ||||
| wer supply. | |||||
| 3 | Mc1 : Select output voltage range . | ||||
| MC1 with MCC disconnect : output 0 ~ 10V. | |||||
| MC1 with MCC connect : output 0 ~ 5V. | |||||
| 4 | Mc2 : Select the calibration value . | ||||
| MC2 with MCC disconnect : Full scale ca - | |||||
| libration . | |||||
| MC2 with MCC connect : Half scale calibr - | |||||
| ation . | |||||
| 5 | Vout : Positive | terminal | of | output | voltage , 0 ~ 10V or |
| 0 ~ 5V. | |||||
| 6 | GND : N egative | terminal | of | output | voltage / current . |
| 7 | Iout : Positive | terminal | of | output | current , 0 ~ 20mA . |
Note :
If STA - 05 tension transducer install STS Differe - ntial sensor by wuhan true engine company , wir - ing colors as follows :
“5V +”— red ,“0V” — black ,“Terminal +”— yellow ,“Terminal -”— green .
If STA - 05 tension transducer install STSA Strai - ngauge sensor by wuhan true engine company , wiring colors as follows :
“5V +” —red , “0V” — black , “Terminal +”— green , “Terminal -” —white .
If only use one tension sensor , please use wires to connect L + with R + , L - with R -
Notes of Using Tension Detector
1. Set screws A and B should not be too long when the bearing houses are installed on the detector. Other-wisethe force could not cause relevant deformations and displacements on the detector. Use spherical u-niversal bearing houses to avoid the detectors on b-oth sides interacting on each other, causing errors on calibration.
2. The wrap angle of film over detector reel shouldn’t be larger than 120, around 60°would be perfect. The s-ignal detected by detector would be too weak to con-trol tension effectively with a large wrap angle.
3. The load force caused by film tension should not poi-nt to the screw ends of tension detector. Otherwise t-here will be very low or even no output.
4. The screw ends of tension detector should point upw-ards when installed on a wall.
5. If the film is pulled cross the reel from below, the fo-rce caused by film tension pulls but not pushes the tension detector. So the negative and positive detec-tor signal wires should exchange when connected to the controller terminals.
Packing and delivery:
1. Neutral carton packing
2. One piece in one carton box
3. Normally one controller with two loadcells,this is easy for shipping.
4. One unit shipping
5. Lead time:within 3 days
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
1994
Total Annual:
2,000,000-3,000,000
Employee Number:
100~200
Ecer Certification：
Active Member
Wuhan Micro Control Electric Co,LTD ( Wuhan True Engin Technology Development Co., Ltd ) is located in the coast of South Lake and surrounded by numerous colleges and universities.The Company focuses on the developing and production of industrial test and control system .True Engin is the first... Wuhan Micro Control Electric Co,LTD ( Wuhan True Engin Technology Development Co., Ltd ) is located in the coast of South Lake and surrounded by numerous colleges and universities.The Company focuses on the developing and production of industrial test and control system .True Engin is the first...
Get in touch with us
Leave a Message, we will call you back quickly!