HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 40 days |
| Packaging Details | Plywood |
| Temperature | Rt+10℃～60℃ |
| Airflow rate | less-than 2m/s |
| Slide powder | 5kg/ m³ |
| Dust | 2kg/m (adjustable) |
| Air metre | A 1~20L / M digital display air flow meter |
| Metal mesh | 50um |
| Vacuum | 0～-10KPa |
| Power supply | 380V |
| Frequency | 50HZ |
| power | 3KW |
| Brand Name | HeJin |
| Model Number | AM0018 |
| Certification | Calibration Certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 6469-1 7 Items Safety Test System For Electrically Vehicle
GB15742 Standard 3kw Electric Horn Durability Test Bench
HJAP11 500*750*750 250L High Low Temperature Chamber
4mm Wall Thickness IPX8 Pressure Immersion Test Device
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 set /month |
| Delivery Time | 40 days | Packaging Details | Plywood |
| Temperature | Rt+10℃～60℃ | Airflow rate | less-than 2m/s |
| Slide powder | 5kg/ m³ | Dust | 2kg/m (adjustable) |
| Air metre | A 1~20L / M digital display air flow meter | Metal mesh | 50um |
| Vacuum | 0～-10KPa | Power supply | 380V |
| Frequency | 50HZ | power | 3KW |
| Brand Name | HeJin | Model Number | AM0018 |
| Certification | Calibration Certificate(cost additional) | Place of Origin | China |
| High Light | 3KW Auto Parts Test Equipment ，2m/S Auto Parts Test Equipment ，Sand Dust Test Chamber | ||
Sand dust test chamber Auto Parts Test Equipment Slide powder less-than 2m/s IEC60529:2013-13.4 IEC60068-2-68-La2, ISO20653-La2
Products Introduction:
This equipment is suitable for the test of electrical electronics, automobiles, motorcycle parts, and seals to prevent sand dust from entering the seals and housing in a sand dust environment.To test the use, storage and transportation performance of electronic and electrical products, automobiles, motorcycle parts, and seals in the sand and dust environment.The purpose of the test was to determine the possible harmful effects of the particles carried by the air flow on the electrical products.The test can be used to simulate open sand and dust air ambient conditions induced by natural or artificial disturbances such as vehicle motion.Auto Parts Test Equipment
Meet the standards:
Test requirements of household appliances, low voltage appliances, automobile, motorcycle parts enclosure in GB4208-2017-13.4, IEC60529:2013-13.4, GBT2423.37-2006-La2, IEC60068-2-68-La2, ISO20653-La2.Auto Parts Test Equipment
Design principle:
Design a conical funnel with a dust collection outlet at the bottom. Install the high pressure turbine circulation fan inlet at the vacuum extraction outlet (bottom) to send the extracted dust to the top of the inner box from top to bottom, so that the cycle will begin.Auto Parts Test Equipment
Main technical parameters:
| model | AM0018-216 | AM0018-512 | AM0018-1000 |
| Studio Size W * D * H | 600×600×600mm | 800×800×800mm | 1000×1000×1000mm |
| Outer box size W * D * H | 900×1200×1650mm | 970×1300×1700mm | 1400×1500×1900mm |
| Temperature range | Rt+10℃～60℃ | ||
| Fine dust | 75um below | ||
| Thick dust | 150um below | ||
| Airflow rate | less-than 2m/s | ||
| Slide powder dosage | 5kg/ m³ | ||
| Dust concentration | 2kg/m (adjustable) | ||
| Air metre | A 1~20L / M digital display air flow meter | ||
| Metal mesh diameter | 50um Auto Parts Test Equipment | ||
| Nominal spacing between lines | 75um or below 150um | ||
| Air blower | Full-plastic centrifugal fan | ||
| Vacuum gauge | 0～-10KPa | ||
| Internal box material | SUS 201 stainless steel mirror plate | ||
| Outer box material | SUS201 or cold tie plate paint | ||
| Control system | PLC Controller + Touch Screen Intelligent Control System (Siemens Brand) | ||
| vacuum system | Pressure regulating valve, suction nozzle, pressure regulating three-piece set, connecting pipe, vacuum pump | ||
| Dust heating system | Stainless steel mica sheet heating cover | ||
| Fundamental structure | Composition of test box, vacuum suction outlet, circulating vacuum blowing device, vacuum pumping system, flow valve, heating system, protection drying net, etc | ||
| Controller control function | Dust blowing time (stop, blow) h / m/s adjustable | ||
| Cycle cycle: any adjustable | |||
| Preset test time: 0s to 999 h99m99s is arbitrarily adjustable | |||
| Power supply mode: off-through-off Auto Parts Test Equipment | |||
| Equipment use conditions | Power supply: 380V; Frequency: 50HZ; power: 3KW | ||
| Ambient condition | Temperature of 15℃ ~35℃ The relative temperature of 25%~75%RH has an atmospheric pressure of 86 to 106 KPa | ||
| Safety protection system | Line order protection, leakage protection, overtemperature protection, abnormal protection, instrument overtemperature protection | ||
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
3000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr... Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr...
Get in touch with us
Leave a Message, we will call you back quickly!