HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 40 days |
| Packaging Details | Plywood |
| Humidity range | 30%～98%RH |
| Humidity deviation | ±5.0％RH |
| Heating rate | 2.5 ° C/min (non-linear, no-load) |
| Supply source | 380V±10%V；50Hz； |
| Temperature deviation | <±2℃ |
| temperature uniformity | ±2℃ |
| Brand Name | HeJin |
| Model Number | AM0031 |
| Certification | Calibration Certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 6469-1 7 Items Safety Test System For Electrically Vehicle
GB15742 Standard 3kw Electric Horn Durability Test Bench
HJAP11 500*750*750 250L High Low Temperature Chamber
4mm Wall Thickness IPX8 Pressure Immersion Test Device
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 set /month |
| Delivery Time | 40 days | Packaging Details | Plywood |
| Humidity range | 30%～98%RH | Humidity deviation | ±5.0％RH |
| Heating rate | 2.5 ° C/min (non-linear, no-load) | Supply source | 380V±10%V；50Hz； |
| Temperature deviation | <±2℃ | temperature uniformity | ±2℃ |
| Brand Name | HeJin | Model Number | AM0031 |
| Certification | Calibration Certificate(cost additional) | Place of Origin | China |
| High Light | Laboratory Auto Parts Test Equipment ，Walk In Auto Parts Test Equipment ，Constant Temperature Auto Parts Test Equipment | ||
Walk-In Constant Temperature And Constant Humidity / High And Low Temperature Laboratory 30%～98%RH Auto Parts Test Equipment
Products Introduction:
It is suitable for high and low temperature and humid heat test of electrician, electronics, machinery and large parts, semi-finished products and finished products.Test the quality and reliability of the products and parts under the simulated temperature and humidity changes.
Meet the standards:
Gb10589-89 Low temperature test box technical conditions;Auto Parts Test Equipment
Gb10592-89 High and low temperature test box technical conditions;
Gb10586-89 Humidity and heat test chamber technical conditions;
Gb11158-89 High temperature test box technical conditions;Auto Parts Test Equipment
Gb2423.1-89 Basic test specification for electrical and electronic products Test A: Low temperature test method;
Gb2423.2-89 Basic test specification for electrical and electronic products Test B: High temperature test method;
Gb2423.3-91 Basic test procedures for electrical and electronic products test Ca: Constant damp heat test method;
Gb2423.4-89 Basic test specification for electrical and electronic products Test Db: Alternating damp heat test method;
Gb2423.22-87 Basic test specification for electrical and electronic products Test N: Temperature change test method;
Gb2424.1-89 Basic environmental testing procedures for electrical and electronic products Test Db: Guidelines for high and low temperature tests;
GB/T5170.2-1996 Verification method of basic parameters of environmental testing equipment for electrical and electronic products.Temperature test equipment.Auto Parts Test Equipment
GB/T5170.5-1996 Verification method of basic parameters of environmental testing equipment for electrical and electronic products.Humid heat test equipment.
Parameters:
| Standard volume (m3) | 8 | 12 | 20 | 50 |
| Internal chamber size (W * H * D) m | 2×2×2 | 3×2×2 | 4×4×5 | 5×2×5 |
| Temperature range | Maximum test temperature: 80℃, 120℃; minimum test temperature: -60℃, -40℃, -20℃, 0℃ | |||
| Humidity range | 30%～98%RH | |||
| Temperature deviation | <±2℃ | |||
| Temperature uniformity | ±2℃ | |||
| Temperature fluctuation | ±0.5℃ | |||
| Humidity deviation | ±5.0％RH | |||
| Heating rate | 2.5 ° C/min (non-linear, no-load) | |||
| Cooling rate | The average value was 1.0℃ / min. | |||
| Inner box material | SUS304 stainless steel plate | |||
| Outer box material | A3 Cold-rolled steel sheet electrostatic double-sided injection molding / SUS304 stainless steel. | |||
| Heat insulation material | Hard matter polyurethane foaming. | |||
| Refrigeration method | Water cooled (Adopt Bitzer fully closed compressor or Bock semi-sealing compressor from Germany). | |||
| Cryogen | R404a,R23 | |||
| Temperature and humidity sensor | Class A PT100 Platinum resistance. | |||
| Heater | Nickel-chromium alloy electric heating type heater. | |||
| Humidifier | Apply the external humidification mode. | |||
| Supply source | 380V±10%V；50Hz； Auto Parts Test Equipment | |||
| Protection system | Power supply phase deficiency and phase sequence error protection, water shortage automatic alarm protection, leakage protection, heater overtemperature protection, heater short-circuit and other overcurrent protection. | |||
| Installation environment | Temperature: 0℃ ~35℃, relative humidity: 85%, air pressure: 86kPA~106kPa | |||
| The installation site shall be flat, well ventilated and no strong vibration around the equipment. | ||||
| There is no strong electromagnetic field influence around the equipment, no flammable, explosive, corrosive substances and dust around the equipment. | ||||
| Proper use and maintenance space remains around the equipment. | ||||
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
3000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr... Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr...
Get in touch with us
Leave a Message, we will call you back quickly!